adams pulse 2

[ssnakeydnb]

what power input/output ratio do u have supposing that the lower bit is indeed the rotor with coils (input) and on top is the generator that will create a certain output of power.

[tesla1961]

it use 12 volt battery lower bit you are correct.top is contactbreker.battery not shown.

[tesla1961]

yes it uses 12 volts, i forgot to tel it uses 8 magnets and 4 time pulses ?

[justme417]

U see the 12v batt and forget that its useing all most no amps. nice job on the moter.

[phoenix31nl]

gegroet tesla fan heb jij die motor gemaakt ?

wil zelf een motor maken met behulp van neomagnets (soort speelgoed magneten) dus als je tips hebt graag.

[challenger159]

the adams motor has coils on the strator with iron cores, and perm magnets on the rotor. The magnets are attracted by the iron cores, this will do 50% of the job. A hall sensor or reed switch will then make the iron cores a repelling electromagnet for a very short period. This setup alone is not common IMHO (common would be the coils on the rotor), but Adams aso claimed to fully compentsate the impulse by the mentioned back EMF.

[bbkingdom]

This is the adams motor. It uses a normal power source. But is also uses the back emf that is generated in the coils. Normally this back emf is not used and can lead to extra 'traction'. When build with all the proper relative sizes this motor can work in a resonant way which reduces the power consumption very much.

[waveman69]

run a search on the perendev motor

good stuff there

[DNM35]

the perendev is a fraud..it does not exist

[waveman69]

it doesnt exist?....or the principle isn't sound?...I see something real....tell me what it is.

[ibercaracole]

Exact !

[PATSICK]

This is normal electrical motor; complete with commutator. It's consuming energy from a source of electrical power. It's kind of a cute little model/hobby project motor; it only the title of the video that's in error; there's no free energy here.

[tesla1961]

theres no free energy nowere on youtube

[tesla1961]

hi there in discription it say adams motor its using 12 volt batterie

[Kevinite]

OK , it's quite hard to tell what exactly this is about but can I assume it is based on a Faraday disc, generating it's own electricity and it is being fed into the two induction coils on each side of the structure. The coils are of course propelling the permanent magnets mounted on the rotating disk. Thus we have a self powered motor/ generator. Am I close?