Wasn't Built For Big Trucks

[utubenz576]

That's some great skill backing just need a smaller truck like a shogun

[utubenz576]

That's some gg

[EverythinMsk19]

at 0:33 ur almost jack knifed



[januaryman169]

That's pretty damned good backing

[bigbear9141]

Need a small truck

[acoow]

I don't think I've seen anything that impressive in a long time.

[torcidas]

So wonderfully done.

[trytofly22]

Masterful Job

[davz45]

It's funny..can't people just say you did a Good job and leave it at that? Good job Driver!

[OMBIC]

lol turning the wheel left and right slowly is soooooo hard

[999myname999]

sir thats kinds wide place wonder if u just had a cushion of 1 foot on every side how would have u fared never the less good

[kenworth36004]

i thought you were blind side untill i noticed your sitting on the right side of the cab making it your good side good job still but not that difficult

[hitler69ification]

great driving u must come to trinidad & tobago and take a drive on some of our roads

[pmora61]

thats a prick of a thing to get around

[sjtom57]

They don't call them knights of the road for nothing. Masterful job.

[wazwazz37]

Sydney City Smallgoods in Marrickville is my enemy.....i havent been sent back there since i scraped a car.

[skl1cent]

wow man that is impresssssssiveee nice jobbbb!

[wetcoom98]

old school

[taitai907]

My nightmare? Driving in Chinatown, San Francisco with a manual.

[gatekeeper88]

fuuuuuuuuuck that!!!... man you slot that in so damn well.. I'd be packin it!

[ym190]

k w what year? nice and clean taking care of. we could use good drivers like u in u.s.

[ym190]

k w what year? nice and clean taking care of

[chadro85]

:0

[jolle91294]

name should be "wasn't made for bad drivers"!

[leemspoor]

nice job man you park better than most of the truckers that i have seen im a truck machenic so i work with them trucker

(sorry for my english im from the netherlands so)

[MsBrawnGP]

Great driving, i for 1 would have had to get out and look on that 1.

[pyrofella]

great job - now hop out and hunt down the shed designer and kick his arse!

[peteacher52]

@pyrofella I agree! Then make the shed owner change the stupid layout of the entrance or have his ring-gear treated in the same way. Expert driver; I thought the guy standing at the side was holding a shoe-horn to assist winkling in the rig.

[dehvon29]

ur good bud nice job

[RyanS6759]

good job man

[PEIbadass]

Try doing that on you're blind side

[yamahonkawazuki]

in 1 shot too. very NICE

[jonnyjb69]

took some skills

[longtimehauler]

tell them to stick it mr poof

[Palenka]

Jesus Christ they don't teach that kind of alley dock at my school lol

[Meat1984Hook]

Damn fine job and hell of a good looking Kenworth Cab Over you got there. I wish they still made em here in the states.

[boneinleg]

ohhh i could have done that in one go and taken half the shed out with it......nice job

[nodrogriew]

Respect is due ,Well done driver

[Tmotive]

Thank God for C.O.E.

[mightythor156]

Bravo sir! Thor!

[mcrayzor1]

thats good driveing i say

[JoshSnoopy]

Thats a realy good driver

[highwaycruiser]

Got a question, did you have your trailer brakes on to swing it tight ?, i sometime use mine in very tight spots..cheers

[zedgraj]

you're good..still at mccolls or did you jump ship? ever think of driving instructor? u know as well as the rest of us we need some 1 who can do 2 teach the young blokes

[teamfab]

Yes, but when you get it right you get a certain sence of satisfaction...

[cabovertrucker]

make the truck an extention of you,re body,and you send her everywhere you want her to go,i know it,i,m a trucker myself,the bigger the dificulty,how bigger the will to try it!i love my job,and motorways and highways are boring,take my words for it,my dear colege man and woman truckers know what i,m talkin about!

[fedehenning82]

can you spell 2 skill

[Mark291074]

well.. thats impressive m8.. either your very good.. or you've dont that a million times :) .. If it were me.. i'd still mess it up on the 1 millionth time =)

[scorelvor]

this is what perfection looks like, .. love ya driving mate!!

[5150ramjet]

good job

[67bowman]

good job.made it look easy.I know its not.

[tobig2bagan09]

Thats amazing driving. thats skills right there.

[rasigs]

the knock is the horton fan they all do it

[DirtyOldCruiser]

now thats is skill 10/10

[cgd27]

OOO Nasty blind side reverse

[do2morenomatterwhat]

@cgd27 why was that a blind side reverse?

[cgd27]

@do2morenomatterwhat i didnt see all the video i posted the comment before I saw where it was reveresing into & it appeared to be a blind sider

[jake69715]

man for someone that hate backing in there so much you sure did it pretty fast.

[cgd27]

@jake69715 skills & practice & the fact that he knows his rig is probably y

[the124Lscania]

sounds like the truck has a knock in the bottom end (bearing)

[Altonmcc]

@the124Lscania V W Clutch Fan is what it sounds like to me.

[MrBtcox1]

Nicely done Driver

[countrymusicgtavboy2]

gald i drive a spayer truck and dont really have to back into docks. i drive a truck and pup.

[jordan082]

you are a great driver!!

[clipdan]

well done!

[bradyrichter]

that is awesome...

[geordiecop]

hope to drive like you one day

[22timingram]

Lovely job. I'll grant you that it does look tight, but at least it isn't a blind reverse, or worse still, a double blind reverse!

[seabulls69]

Excellent job. Got any where you're doing the same thing only on the blind side?

[jwkenion1]

nice peice of driving!

[signal44]

Thank goodness for cabovers, or good by bushes.

[379peterbilt530]

thats a nice kw

[jarl44]

Wow remember guys back in the day when companies didn't even want to look at you if you didn't have at least two or three years experience? Man wev'e come a long sad way away from that. This man is a surgeon with theat truck BRAVO my good man.

[MEXICANnotmexicanTt]

fucking flawless

[curnock]

makes it worse backing out of the sunshine into a dark warehouse !!!!

[GINGERDAVID90]

nice job driver im not a driver my self but ive had a small amount of experience theres a loading bay lik this near to wer i live the drivers got to go in bkwards on there blind spot ill try to get it of video n upload it for you n see what you think oh by the way bloody well done great job indeed

[1946hastings]

I thought I reversed coaches into tight spots and drove them and trucks in the uk for 36 years, but congratulations to the driver of this truck what with the length and width it is truly a brilliant reverse, from Kelvin in Istead Rise Kent England

[funboy0420]

Mad skills. Period.

[MudPitBoy1]

YOU SIR , along with my dad & very few others have got to be the best drivers EVER! It take alot of skill 2 drive a truck let alone BACK 1 UP into a space that

small !!

Great driving man !! Thanks for the vid.

[reality00000]

I Used to hate reversing at the woolworth dock in the Liverpool (Sydney) shopping centre. It was a C**T of a Job. lol Now some other poor guy has to do it.

[blobby1972]

now do it blind side lol

[seamaster27]

Twice the skill of 747 pilot for just one quarter of the pay.

[drumbasher]

Thats a fine looking Kenworth. You just don't see them in the US anymore, or any cabovers for that matter.

[littlescotty1987]

too easy! lol, like your confidence! not even a forward move, great work. i can back a b-double onto a finger dock, but thats about as far as i go! LOL (its in a straight line)

[moe346john]

nice job! my mom can't even parallel park. lol

[tacotacohoyhoy]

NICE. no way in hell I could pull that off..

[malberts1954]

Well there's your problem right there. You're sittin' on the wrong damn side of the truck!

All BS aside...good job.

[midarms1]

Gotta say-- it looks like youre pretty good at putting big things in small dark places. lol

[SilverFox466]

Blind side and tight. I would be so pissed off if I were you. Good job.

[jstatrck]

@SilverFox466 . The truck is a right hand drive so that is his good side

[hm4973]

@SilverFox466 he didnt blind side.

[SilverFox466]

@hm4973 I see that now. Thanks!

[SilverFox466]

@hm4973 I see that now.

[TheMasterer71]

Nice job though...

[johnny2366]

you did pretty damn good from I can see....and it might seem like an obvious question but, I cant see the entire lot so...is it not possible to set yourself up there so you dont have to blind side it back into the hole?...

[hm4973]

@johnny2366  He didnt blind side. its not an American truck.

[johnny2366]

@hm4973 yeah I realized that after the fact

[194peterbilt2]

nice backing looks like a bitch

[punjabadoo]

i do that blindside almost everyday with my pete and tridem 53ft container, should try backing up to some of these walmarts

[RPHELPS922]

Well done but if you want to impress me, do it at that dock in an American left hand drive truck. You were sight side. We back into docks like that blind side, a lot in New Jersey, New York, Boston and Chicago over here. Either way, well done driver.

[stewartx5]

DingosGotMyBaby > '.. driving nightmares ..'

Too long ago for video, but mine was 3 trucks hauling fuel on ice covered bridge as car pulls in front of first. He (hauling gas) jacks to avoid car as I (diesel) slide towards him. Got cab over enough to clear, but trailer slid sideways towards his. Tires finally grab, throwing trailer over (his bumper cut tires). Last truck (aircraft) back enough to stop slowly. 1st driver was still running down hill on foot afterwards.

[jaimejahir]

esta chidita la chata

[matts4290]

Holy Shit.

[stihlthebest]

GRRRReat Job!!!!!!!!!!

[bigbowbrum]

Lovely driving sir. Well done.

[totalredneck454]

very nice no way i could ever do it in our rig but in a coe i'd be willin to give it a try

[j0mp4m4n]

You're sick at driving :O

You own :D

[7467scott]

I agree it's not that big of a deal, just a pian in the ass. I can think of a few that were major pains. Always interesting to see what others think is a major PITA as well.

[rfruss]

I was about to comment ," why the blindside" until I saw the end of the video. lol

[rangerman2237]

going to places like that bows the first trip or 2 but after a whie u sort of find lil tricks to get in there but either way my pete would have never made it in there that fast haha

[normishot]

awesome job most people could try that 100 times and not do it any better..

[longbed72]

wow talk about a tight squeeze, been in a few places myself, nice backin there!

[jamzva]

"??? that is what we do ,Im truck driver ,is not too narrow

[MrTrucker199]

wasnt that bad but I wasnt there to see clearly.

[hugewaylonfan]

Dont Look That Bad To Me.

[Darrenhale1]

WELL done nice work from the tiny place

[ding0925]

Sounds like a cummins eng...

[jimmydoit]

imagine how good he could back if he wasn't sitting in the passenger side seat ;) nice job ! reminds me of my old days of backing the rolling grocery store into tight spots

[chemtankerdave]

nice job!!!...id just back close to the door and run 4 lenghts of 20 foot hose into the bay...

[Mechknight73]

Did the most graceful job of manouvering I've ever seen, but the question has to be asked: HOW MUCH WEED DID THEY SMOKE WHEN THEY DESIGNED THE PLACE??

[0Jamster0]

what are you trying to say

what's wrong with weed

[Mechknight73]

Nothing wrong with smoking reefer, except if you're behind the wheel, especially something like this. I don't care how "resistant" you think you are to any drug, you need to be fully alert to drive these things

[Mechknight73]

People tend to do their goofiest work when they're stoned

[cowboy1180]

nice job

[truckersteven]

NICE !!!

[viperzeroone]

Ya may hate the bay, but ya did a beautiful bit of backin there!

[FlyinTruckr]

A good piece of driving!!

[UteBloke]

Gotta love aerodyne's at times ay

[antsHUGEmule]

he obviously knows what hes doing but damn he just backed in a hole. we have to do that every day.

[MrSnel]

nice driving, but these tight corners are pretty common here in europe. only the european trucks are more agile and more flexibel.

[mattypercy]

thats some bad ass driving

[timmcchorffe]

pretty damned good work mate!

[plowking883]

thats nice, but id be more impressed if he got it in 1 go, without creeping forward that lil bit...

[tttttttttttt93]

it's not posibile ;)

[jeffrreydm40]

bygod gotter did!

[RevJason1976]

Outstanding!!!!

[letterbed]

Excellent job with only one pull-up and a tight doorway no less.

[8590edward]

If this is the same dude that backed those triples and doubles he's pretty darn good, i must admit. But notice that the trailers they use have extended frames with 5th wheel mounted to frame of a trailer instead of a dolly. I may be wrong, but i don't think he coulda done that with a dolly?

[OldRottenDingo]

A real good driver.

[8590edward]

I agree with JMPILOT6714.... If you want to impress us, blind side that baby.... without the pullup.... Notice that was not his blind side?

[jap323]

Now you two guys have no idea what you are talking about ha ? :) Maybe you should check other vids from this person and then try to say something like that ;)

[JMPILOT6714]

Try blind side backing in...and a conventional tractor and I would be impressed.

[mudvainjeep]

awesome, like a glove

[eyeballdude]

holy crap! now that's awesome driving skill, right there!

[Bernhardist]

Great job You´ve done

5+ from germany

[harmon193]

GREAT JOB!

[thesnoozegroup]

WOW!!! My jaw dropped open. wow. That was amazing!! Great job, man :)

[polishranger]

this looks like a preatty easy job to me. you should see some of the shit holes i have to back into. the question i have is: who designs all these impossible places. the only thing that still stresses me out (don't laugh at me) is backing up between two trucks. i always have a fear of clipping one of the mirrors and always take my time. i hate blindsiding off of a busy street between two buildings on a really bright sunny day.

[LB10671]

Very nice backing that beast up.

[tubernua571]

great stuff, but then they make the driver wear a tellytubbies yellow jacket in case he doesnt see the forklift

[linfox01]

patient i think thats a k100e not sure . but this guy can proably put a double in there no dramas so shouldnt be an issue at all for him . good work

[patentagosse]

2 thumbs up!

You must be from down under 'cause it's the first W100 Kenworth I see with cockpit on right side (our usual passenger side). 'Looks like a Smart factory based on tightness of door, not even allowing you to have long chrome pipes as we have here in C A N A D A (where space to manoeuvre is, usually, not a problem...)

[phokoff79]

dude that sucks....at lest you can drive

[JuanPapaNicolao]

Aw damn that looks like a kick in the gonads

[Bernhardist]

Sauber eingeparkt!!!!!

b from Germany

5*

[praterguys]

great job driver.

[escapedcops08]

damn Ive had to do 4 of those and I've only been a driver for 3 months now.

[warthhoh]

great  you got a nice looking kenworth

[16bloomers]

I have to park on bays in London that are so tight you have to drop trailers from left to right or you haven't got enough room to wind the legs down. And these are purpose built. Maybe i'll go work in Canada i'm told there is plenty of room there!

[MrActrosDriver]

You are right about London, used to live there, canada is meant to be a breeze

[Bdawgs19]

Dayum talk about tight spaces, well done bro. if that was me doing it i would of taken out that white tuck behind you and the garage. or both. good job.!

[oetlul6666]

well done good job

[MrActrosDriver]

Good Job, but you want to come to england, you would not believe how tight purpose built loading bays are

[redwog1]

f**k me thats tight

[kgoody84]

holy shit! you've must once or twice before,lol. good job. your truck dosen't sound to healthy though.

[BleifussOz]

Well done .

I used to drive floats delivering earthmoving gear and had to do these inner city jobs backing into carsized driveways from busy 4 lane streets.

Feels good though when you done it and didn't hit anything.

[dead713]

wow, thats some damn good backin up there

[czing2004]

Good job.

[Fishchick65]

suitably impressed. most people can't reverse park a shopping trolly!

[PaulK0512]

wow.. weeeelllll done!!

[inhumangeorge]

That would have been a C**T of a turn the first time you tried it but well done mate. [Deserving Claps]

[freightrelocator]

wow, well done.