@bpmagruder Errrrr.. the definition of "undocumented" means it's NOT in the manual :-) (unless they have changed the manual now to include it since I made this video a few years ago)
oomba will tell you something is wrong with a two-tone "Uh-Oh" sound followed by either (11) beeps. This means that Roomba's bumper is not registering obstacles. If using Roomba in an extremely large room without obstacles, try using Virtual Walls to create a smaller area to clean.
Check to see that Roomba is not stuck in one place and move Roomba away from any obstructionsPress the bumper on the front (and both sides) to feel for proper spring compression. It should allow you to push it in and then spring back outward when you release it. Briskly tap the bumper on all sides several times to loosen any debris that may be lodged in it.
Definitely a problem with a wheel, because it should not be moving in that pattern at all. Open it up, check the wheels, spin them, clean them out, etc.
cool. haven't seen that problem before. Try cleaning the brushes, cliff sensor, front sensors, and move all the wheels around to see if one isn't stuck. cool though.
You've probably fixed this, but the one I have does this now and then. You may need to clean your cliff sensors out. An air compressor works best for this.
Your Right Wheel is damaged OR a faulty transistor needs replacing. You can visit my username for Roomba repair spares.
iMayneDotcom 3 months ago
In my Roomba's manual it's written, that you should clean the side wheels of hair and debris
themaris0009 6 months ago
Left Wheel is broken.
MrHam1999 11 months ago
Was the left-wheel-module that was faulty. Replaced with a new one and it's been going strong ever since :-)
timjohns 1 year ago
what was the problem? im checking out all the3 utube vids b4 investing in one of these.
ClaudiousOleander 1 year ago
That spot must be definitely clean.
AznKhmyboy 1 year ago
It either means that the left wheel isn't functioning properly, or the clean button is stuck to the spot button.
bpmagruder 1 year ago
Check the manual.
bpmagruder 1 year ago
@bpmagruder Errrrr.. the definition of "undocumented" means it's NOT in the manual :-) (unless they have changed the manual now to include it since I made this video a few years ago)
timjohns 1 year ago
@timjohns do u still have the roomba!?! :)
monty4000 1 month ago
oomba will tell you something is wrong with a two-tone "Uh-Oh" sound followed by either (11) beeps. This means that Roomba's bumper is not registering obstacles. If using Roomba in an extremely large room without obstacles, try using Virtual Walls to create a smaller area to clean.
wwallender 2 years ago
Check to see that Roomba is not stuck in one place and move Roomba away from any obstructionsPress the bumper on the front (and both sides) to feel for proper spring compression. It should allow you to push it in and then spring back outward when you release it. Briskly tap the bumper on all sides several times to loosen any debris that may be lodged in it.
wwallender 2 years ago
Definitely a problem with a wheel, because it should not be moving in that pattern at all. Open it up, check the wheels, spin them, clean them out, etc.
fredct42 2 years ago
I'm riddin spinnas i'm riddin spinnas, they don't stop.
PrettyBrg 2 years ago
i counted 12 beeps
wwallender 2 years ago
my roomba doesnt start cleaning when i press the clean button
cwlkenny 2 years ago
my roomba got broke after almost 2 years of service and half a year of baby abuse (especially drooling over main button). It beeps 9 times though
slidersv 2 years ago
wow that is one clean circle!!
videogamer24385 2 years ago
cool. haven't seen that problem before. Try cleaning the brushes, cliff sensor, front sensors, and move all the wheels around to see if one isn't stuck. cool though.
NickInTimeFilms 3 years ago
You've probably fixed this, but the one I have does this now and then. You may need to clean your cliff sensors out. An air compressor works best for this.
nightowl1989 3 years ago
lol
chrisgoozey 4 years ago
it likes dancing
all1357 4 years ago