you'll end up creating more and more gates to over come. I tried it first with just two then three, four and so on. Unless you over come the gate completely it will not work. It looked so promising but it won't work even with the slightest of gates.
you have to overcome the flux gate problem if it dont atract and sends rotor away from the stator then this is what you get remember howard johnson track setup its start and then it push the rail car of the track.
Saubere Konstruktion! Aber Glauben Sie dass das tatsächlich mal so funktionieren kann?
LactobacillusBrevis 2 years ago
Die Kraft, die den Rotor vor dem Vorübergehen von Stator hemmt, ist sie schwächer als nach dem Vorübergehen von Stator gestoßen?
jasminrousseau 2 years ago
what wooul happen if you set up the same arrangement of stator magnets on the opposite side of the rotor?
would the kick from leaving the first stator be enough to pass it through the second stator?
zeropointinstitute 2 years ago
you'll end up creating more and more gates to over come. I tried it first with just two then three, four and so on. Unless you over come the gate completely it will not work. It looked so promising but it won't work even with the slightest of gates.
mcorrade 2 years ago
you have to overcome the flux gate problem if it dont atract and sends rotor away from the stator then this is what you get remember howard johnson track setup its start and then it push the rail car of the track.
MYLOW121363 3 years ago
Toll Dietmar !
Du wirst es bald schaffen !
Ja genau, mach erstmal mit einem Stator weiter,
bis er genügend Kraft hat, den Rotor zu beschleunigen.
Vielleicht noch mehr Eisenbleche am Eingang
anbringen am Stator,
so dass es noch mehr asymmetrisch den Stator Fluss umlenkt und der Rotor mehr angezogen wird.
Gruss, Stefan.
overunitydotcom 3 years ago
Excellent work. As always, an inspiration to us all. Keep it going!
sirHOAX 3 years ago
Can you flip the table on it's side or maybe at a slight angle so that it will turn without the aid of your hand?
Otherwise wonderful. Your moving the retarding feild to help give it an extra kick!
Manitobah 3 years ago