Add 40 HP in 3 Minutes CUMMINS

[nboldman]

what year and make is that pickup?

[chanceiw5]

Did you have to put a lift kit on your chevy to clear the oil pan and transmission

[SBCK5]

Can you help on the 7.3 idi?

[Wpsuspension]

sure coulda used your help working on my truck!

[UKmatt2000]

I just realised that I hadn't seen this yet. I read that the pins fit any Bosch VE pump and to my delight I found that Land Rover diesels use the same pump. I reckon when I get one I'll have to get myself a play pin too. Thanks for the great video Wayne.

[MrCrewcab88]

I put one in a 94 1 ton and there. Was no lift needed it was factory height.

[canadacatalyst]

great job wayne. is there anything i can do for my 2001 24 valve?

[Needmorehorsepower]

nice easy way to add 40 hp you have a vast knowledge of the cummins thats for sure .Are you resurfacing the road there? i didnt think it was ever gonna quit spinning lol Great video

[dieselmopar]

Still running the plastic throttle shaft ends?! And I see you got one wired on

[TheDieselStop]

@dieselmopar Ya for now I got to get some new. Why they made them out of plastic is beyond me.

[SuperRedneckson]

thats swet almost wished i would have got an old 12 valve in stead of 2 24's

[robert281979]

I have a 95 chevy with a 6.5 turbo. I have been thinking about putting a cummins in the truck since the 6.5 has all but blown. The problem is I don't know how to hook everything up, so all the electrics work with my chevy. Would you be able to tell me how to do this, or let me know of where I can find a step by step dummies quide?

[TheDieselStop]

@robert281979 There are a few people that have swap the cummins into the year of truck that you have. I have seen this swap done on youtube & I am not sure on the electrical part but it should not be that hard. I have no scumatice for the electrical. It would be best to check on the cummins chat form's that are out there. Just to let you know that cummins will not fit in that truck with out a lift kit. The oil pan will not clear.

[CustomDeluxe1984]

@TheDieselStop if you get the avalanche engineering crossmember kit it will.

[Graveltrucking]

I was waiting for the rear axle to grenade LOL.

[Djkyle65]

Im thinking about picking up one of these k series trucks for a build what do you think i should look for are certain years better then others? What about axles ? Thanks!!

[rex4x4]

Dammit .... No sound :-(

The one wheel peel looked awesome though .

[BigBossMan4500]

its not a posi-track axle. thats why it has a one wheel peel.

[gogmorgoaway]

Any idea why it's always the right tire that peels, and never the left?

[firefighter215215]

got the M5 pin in the truck i was going to use as a donor, works good helped the old dodge out

[mrRhwalden]

I've loved that truck since the 6.2 build. Still putting a flat bed on it?

[TheDieselStop]

@mrRhwalden Its getting a short bed on it. Not a flatbed.

[madman1124]

one wheel peel :D

[SBCK5]

I wish it was that way on the 7.3IDI! I found out that i am turning 36" tires with 3.55 gears!!!

[skatecodered]

@SBCK5 7.3IDI IS BEAST MODE BUDDY AND ALSO THE 7.3powerstroke up to 2003 cuz its an international diesel engine

[edzgarage]

Looks pretty easy. Thanks for showing us how to install 40HP!

[ShnitzlHaus]

yeee haw!



[LMBTrippyPsycho]

kick ass burn out

[Jacksonkellyfreak]

are you eventually gonna do something about the peg leg differential?

[josderedneck22]

cool vid bro....

[natescamp]

I thought this was gonna be add 40hp in 3 minutes by taking the bed off lol, makes it feel it how much easier tires spin

[Gasser4x4]

Ooo i gotta see you do that kit

[91CTD]

Back your smoke screw out. with your smoke screw all the way down and an aftermarket pin you will defuel on your top end because the pin will go down too far

[TheDieselStop]

@91CTD If you look closer to the first part and the last part of the of the video you will see that I have done that bud.

[vatechbiggdanny]

@TheDieselStop beast mode ...lol i dont like dodge but this cummins is wearing on me lol

[TheDieselStop]

@vatechbiggdanny Well in your case it is a good thing that dodge dont make the cummins diesel.

[vatechbiggdanny]

@TheDieselStop well true that... lol but cummins r in dodges ...

[91CTD]

@TheDieselStop Alright Wayne i was just makin sure you knew

[yourbeekeeper]

Great way to squeeze out more horsepower. Gotta love burnouts!!!!

[cshank72]

Hey Wayne your going to need a tire Sponsor with all them burn outs!! LOL!! your not going to have a tire left by the time your done with that pump!! Keep up the cool vid's i always look forward to them!!

[SCBianchi]

Just so bad ass. I have loved this truck for a while now.

[RamblinAround]

About the easiest way to pickup 4o horses that I've ever seen. Looks like you've got it running real strong.

[KarinaStause]

Nice burn time

[customsport]

Smoke em if ya got em.

[GarageCrazy]

Sucks its 1 wheel peel and it's such a cool powerful truck. Great vid man.

[RockinGuy1994]

Do you have any trouble with the law, when your doing burnouts?

[REDT4R1]

Man that thing is a beast....i love the sound of this thing..Nice work man she's coming along well.

[TheDieselStop]

@REDT4R1 Thanks for watching.

[boredmud]

youtube is removing my subscriptions, it's crazy but i still catch your videos wayne, though them ratings are disabled, i still give thumbs up and cant wait for the next video bro..

[TheDieselStop]

@boredmud Good luck with the youtube thing & Thanks for the cool comment. 

[boredmud]

@TheDieselStop thank you brother and roll them coals!!!!

[TheDieselStop]

@boredmud Will do.