Testing out the FP Evo Red turbo...

[thefamouskid]

what BOV is that ? <3

[gtfr88]

hi guys, thats a great video! im looking to install the red this month, do you run 2.0 block and stock internals? about the bov, i have the tial q valve, if you guys are now running the same which spring do you recommend??

[twrzenski]

Awesome vid man!

[hinnyrsx]

sorry but i disagree the fp red is an excellent turbo but i think borg warner turbo's by far are the best.

[jm71681]

What type of BOV is being used in this vid? I see you mentioned TiAL, was that in the vid or after?

[Duckyistrippin]

nice to see a car with some power being driven the way its supposed to. where the slower cars pulling aside for you, or is it that easy to reel them in?

[EvoFurley]

Sexy Nils! LOL

[georgeadam2]

I'm falling for the Fp Red ... the thing is I drive a Tommi Makinen, and the best part of the TME turbo is it's very early spool and boost ... but can only make around 370whp max ...

If I may ask ... how low does the FP Red turbo kick in ... from what i've read about it ... it seems that it delivers power much earlier than the GT30R or GT35R ... am I right???? I do respect both turbos but can not stand the lag!

Thanks in advance for your reply :)

[EvoNils]

best spooling turbo for the power it makes.. it cant be beat.

[gsr0801]

The FP RED spools the same as the stock turbo and give you close to the same power as a regular gt35r; not the HTA35r though.

[ssacc556com]

whats kind of turbos that u got >>?

man i have evo 8 with 2.3 HKS strock and 280 hks cams and cosworth heads and HKS turbo kit gt3037s and F-con HKS but i don't know yet how much whp can i get from thes ... i mean at 1.5 bar also at 2.2 with pump gas ...... what do u think>>>

[tommyvercetti17]

flutter = bad..... not too familiar with greedy bovs..do u need a stiffer spring for those?btw i thought u had wrecked it at the end lol

[EvoNils]

you are right... we are trying a new TiAL bov with different springs to get a better powerband... thx for the comments guys!

[NightmarEvoVIII]

its on a softer setting the softest sounds like a rattle snake lol

[ChrisRWilcox]

Hey we've shared some comments on EvoM, good to see your video, that's one fast course

[EvoNils]

Hi Chris, yes I remember.... go for those group N shocks... perfect for mexico!! :)

[phazee]

the bov sounds like greddy type s with a flutter at the end

[papachaney]

who makes your bov? its clean... i have a fp red evo & want a new bov

[Evo28111985]

hi!

nice the FP RED!! how many boost you have driven on the video??and how many hp/tq??

the bov sounds very CRAZY!!!!!

i have a 2000 race engine on my evo and i will take the FP RED! do you think that i made over 400hp??

thanks a lot! great viedo!!

greets from ITALY!!

[EvoNils]

we run about 25psi on q16 leaded race fuel... we have never dynoed the car but we think it puts down somewhere between 450-470hp to the wheels..

you should easily make over 400 with the FP red.

[Evo28111985]

thats great!!!

and the 25psi at how many rev you have it??

it spools good the fp red??like the original turbo or much later??

thanks!!

[wesside514]

Nice Nils :) From what you said about going from the green to red makes me want to go red in the spring

[EvoNils]

i just accidentally deleted someones comment.. sorry about that & feel free to post the question again.

[egcivicgeneral]

EvoNils, I've just serched for the Forge Motorsport RS blow off valve and there are two types,

1, Mitsubishi Evo VIII Forge Type RS Atmospheric Piston Valve

2, Mitsubishi Evo VIII Forge Type RS Recirculating Piston Valve.

Which one would it be from the two?

Thanks.

[EvoNils]

mine vents to atmosphere cause I dont run the MAF

[Btownsoccer22]

AEm or a speed set up?

[Btownsoccer22]

what are you making hp and TQ wise? I'm guessing somewhere in the 400's?

[EvoNils]

yea.... depending on tune 430-480 to the wheels

thx

[phazee]

what bov are you running? or is it block off? sounds crazy!

[EvoNils]

its the Forge Motorsport RS blow off valve.

thx

[evolution757575]

very very nice...i wait my red turbo from fp.can you tell me what you have to your evo please?

[EvoNils]

thx... pretty much all the bolt on ons you can imagine, built 2.2L motor, stock intake manifold, stock head w/ FP 300 series camshafts, hks fcon V pro ecu...

[mcbrite]

I take it that isn't a daily driver?

Spool-up sounds pretty quick!

[EvoNils]

actually, it is street legal, registered & fairly easy to drive around... but you are right, I dont daily drive it anymore.

thx for the comments.

[mcbrite]

nicely done! pop-off is a tiny bit loud for my taste, but since you don't drive it daily anymore it's fits the race-track perfectly...

btw: Do you have any idea what's the best/biggest/optimal turbo if you want to stay with ecutec, rather than invest in a custom ECU?

Would it be the fp green with ballbearing mod?

[EvoNils]

standard FP green or red would both be awsome, still on stock ecu...

[trumpetcarguy]

Power comes on nice and smooth. You gotta load the video with better resolution though!

One question, is there a little compressor surge in the mid range or is that just BOV flutter?

[EvoNils]

light lifting of throttle... some BOV flutter.

[rj1031]

Just curious...what kind of gauge is the 3rd one on the right? Somehow, it goes on and off. BTW, was that a red Z06 that you passed? NICE!!!

[EvoNils]

oil temp... the location of the temp sender gets heat soaked.

[diiirk]

you ever log these runs? curious how much knock a car usually pics up from a full lap of wot?

[EvoNils]

we do log the car sometimes but this time out we did not, so Im not sure on knock count.

[m2001mj]

what is your whp? and wtq?

[EvoNils]

prolly around 450-70 to the wheels.. never dynoed the car, just road tuning.