RC Airbus A300 Taxi Test!

[canadiangunreviewer]

Is it possible to make a 2 foot long America airlines md-80 ( what's the price with the retracts and LEDs and flap etc..)

[F3HDemonDriver]

@canadiangunreviewer Shure but at 2 feet long it's WAY to small for edfs or retracts, it can only be a hand launched pusher tail prop MD-80 probably under 150.00 plus shipping.

[canadiangunreviewer]

@F3HDemonDriver is a 737 the same price

[F3HDemonDriver]

@canadiangunreviewer same size? if yes then. . . .shure!

[RcLento]

Hi demon ! i have just recognised that front landing gear is a little bit flexable to front and back ! Is it normal ?



[F3HDemonDriver]

@RcLento No Sir it isn't I think that the Nose gear wasn't 100% secured & may have become loose, Good eye Lento!

[gtp1500]

I had forgotten how sweet that one looked!

[F3HDemonDriver]

@gtp1500 Thanks Sir!

[delts99]

so cool some day me and my dad are going to buld 3 airlines delta american and virgin atlantic

[F3HDemonDriver]

@delts99 Thankyou Delts99! You should build those airliners! it's allot of fun!!

[ymanganelli]

Great job builing your A300... its awesome seen guys interested on R/C airliners... cheers

[F3HDemonDriver]

@ymanganelli Thankyou Ymanganeli!

[DJSI3434]

Is it possible for you to make a 717

[F3HDemonDriver]

@DJSI3434 Shure! I love the Boeing 717!

[1BigPlan]

does it fly??

[F3HDemonDriver]

@1BigPlan. Hi Bigplan! I was built to fly. . . . If you look at my video of my airliners all my jets fly! My 707 will be taking her maiden flight soon!

[shadowfax123456]

You know just dont build it till i have the money fully. ill tell you when i do.

[F3HDemonDriver]

@shadowfax123456 No Problem! I can't start it for a month or so anyway.

[shadowfax123456]

sry to bother you again but can you do a united paint scheme and when should i have the money?

[shadowfax123456]

Sry for keep bothering you but when should i have the money ready and can you do a united paint scheme?

[F3HDemonDriver]

@shadowfax123456 Shure I can do any paint scheme you want!

[shadowfax123456]

Thx you soo much :)

[F3HDemonDriver]

Hi, I can build you a mini . . . I mean small pusher prop a300 like 2 feet long or something like that for 260.oo or 300.oo.

[shadowfax123456]

heyy i have an idea... just build me a smaller scale not a giant one.

[shadowfax123456]

DUDE ITS BEAUTIFUL BUT I AM A 12 year old I have a small price limit of $260 whats your lowest price..... ;(

[shadowfax123456]

amazing ,how much would one united airlines plane be?

[F3HDemonDriver]

@shadowfax123456 Interesting! United Colors. . . .One of these 7foot long A300's will run you 1,100 even thats for the finished jet minus he EDF's batteries, servos, Esc's, retracts. . . . you pay for that in addition, Thankyou!

[tyty0blake]

Beautiful! can someone please tell me where to get equipment to make one of these?

[F3HDemonDriver]

@tyty0blake. Hi Blake . . . . I built this A300, what questions do you have?

[tyty0blake]

@F3HDemonDriver I just want to know where you buy the equipment to build these? and I want to be abled to build my own... but with jet turbines... I have so many can you email me tyblake15@yahoo.com

[F3HDemonDriver]

@tyty0blake. Shure bust remeber one thing Blake turbines equal big Buck$!

[tyty0blake]

@F3HDemonDriver How much are we talkin?

[F3HDemonDriver]

@tyty0blake. Hi Blake wekk this Airbus A300 costs around 1000-1,100.oo to build now that's the airfrane only that does not include edfs, servos, motors, speed controller, or retracts & lights you also have to buy those this as well Now I can build you the jet and you can add those things at your own pace.

[tyty0blake]

@F3HDemonDriver I think I might go ahead and put one on order for you. do you only do them in American?



[F3HDemonDriver]

@tyty0blake Shure Blake can build any airliner in any paint scheme!

[tyty0blake]

@F3HDemonDriver I want several. like probably 50 or so but for now lets just focus on one. I think I might want a United/continental A330, or maybe an A380.... not sure yet, I can tell you that I most definitely want a southwest 737, and an Emirates A380. I want it all decked out too. like with LED's and jet turbines.... if thats possible.

[subron6er]

Those things look GREAT ! I love the aluminum looking finish....

[fabiofleal]

That's beeeeeeeautiful!

[tonystarification]

fly it please i want to see it fly. when are you flying it. h yeah great a300 nice work good craftsmanship

[F3HDemonDriver]

@tonystarification Hi Tony I would love to do nothing more than Fly her but the man I'm building her for will get that chance, He will post the video on youtube for shure!

[tonystarification]

@F3HDemonDriver where did you get your depron. im just 11 years old and i plan on building an 8foot 777 american airlines i already made a mini md-80 out of toilet paper rolls and foam and it flew but i wanna make a 777-200 bad i already have a 1:200 scale of it all.by the way did you get your electronics from high rc technology.

[F3HDemonDriver]

@tonystarification Tony If your starting at 11 by 17-18 you'll be a scratch-build master! I get my Depron from RCfoam dot com in georgia, as for the tech side I use mini high torque servos & het EDF-ESC & Motors from EJF dot com and I use only Futaba Fasst radios & recievers.

[tonystarification]

@F3HDemonDriver thanks so much what size is the depron

[F3HDemonDriver]

@tonystarification Hi tony I use 2mm Depron for the fusealge & 3mm for the wings.

[tonystarification]

@F3HDemonDriver sorry to bug you again demon. lets say what if i scrapped 2 rc 4ch p-51s with a 6ch receiver and i took the 2 motors and i connected it to the receiver with a y harness and i use a 6ch transmitter and i put the servos for the elevators ruder ailerons an flaps in the right place will it work.or u could tell me all the electronics i need to buy.thanks.

[F3HDemonDriver]

@tonystarification your saying taking 2 hobbyzone P-51s. Take evrything out of them to put them into What excatly? Another arf? Or a plane you built, if you Y connect both ESC's together and insert them into channel 3 your throttle channel & run 2 11.1V batteries it will work Sir. Are you putting this into a DC-3 or B-25 or something? Hey In here to help so ask me wahtever you want & if I don't have the answer Ill find someone who does, that's what RC building is all about.

[tonystarification]

@F3HDemonDriver itsnot a hobbyzone but an art tech plane. and im putting it into an 8foot777 american airlines plane

[F3HDemonDriver]

@tonystarification. TThis 777 is it gonna be an EDF or pusher prop? Are these the big 55inch P-51s?

I would say an 8foot 777 will require 2 100mm edfs with 2 80-90amp esc.s. 8 Foot jet= allot of ca$h

If you scale it down to 5 feet your p-51 stuff will work.

[tonystarification]

@F3HDemonDriver its gonna be a ducted fan. ill try to scale it down to 5 feet. the p-51s are not 55 inches but i forgot what size they are.hey if you want cool hobby sites go to banana hobby and nitro planes .com very cool. go to warbirds on banana hobby and scroll down until u see a yellow tail and red cowling p-51 thats the p-51 i bought.when you see it tell me what size plane i should build

[greenseaships]

I would put a little extra carbon fiber in the vertical tail of that AA Airbus 300 O_O

[bigstickflyer]

lets fly it at tiger field.. !!! i am ready.. we have 125 ft of matt.. just for you

[F3HDemonDriver]

@bigstickflyer Thanks Boss I'm greattfull I'll bring one of my airliners up soon!

[SilverFoxx13]

DD, I've been following this build and I have to tell you that this plane looks amazing! Great job.

[F3HDemonDriver]

@SilverFoxx13 Thankyou my friend! I'm greatfull!

[nishbrown]

Nice.

;-)

[F3HDemonDriver]

@nishbrown Thanks Nish!

[MrBhargab123]

can it fly?

[F3HDemonDriver]

@MrBhargab123 I shure as hell hope so! Lol

[chicagosrc]

DEMONDRIVER, I APPLAUD YOU. ALL THE WAY FROM CHICAGO.

THANKS FOR YOUR EFFORTS.

NASSER FROM CHICAGOSRC

[F3HDemonDriver]

@chicagosrc you honor me beyond my accomplishments!

[youtwoba]

Man are you gonna actually fly it or hang it in a museum? That's a thing of beauty! If you are a afraid to pick it up I can imagine how you will feel on maiden day! Looking forward to seeing that baby in the air!

[F3HDemonDriver]

@youtwoba How about the AMA museum? . . . .No it's gotta fly first LMAO!

[chochmah]

congrats, she looks even better moving then in the stills! A real Beauty.

[F3HDemonDriver]

@chochmah Thanks Choch! :<)

[daveyedgar]

all i can say is WOW!

[F3HDemonDriver]

@daveyedgar All i can say is THANKYOU! :)

[TheLipRipp3r]

GEEESH! Get your priorities straight!!! ...get a new vehicle!!! hahahaha Very cool model...you did a great job!! Looks like she's ready for a maiden!!! :-D

[TheLipRipp3r]

@TheLipRipp3r

Now......that's one way to pick up the ladies!!!!!!! lol

[F3HDemonDriver]

@TheLipRipp3r . . . . . . . RC Groupies!

[TheLipRipp3r]

@F3HDemonDriver

hahahahaha! My fav!  No questions....

lol

[F3HDemonDriver]

@TheLipRipp3r  I think I'm gonna need an 18wheeler!

[TheLipRipp3r]

@F3HDemonDriver

...for the A300, or the groupies??? lol

[jauchiu]

Amazing! Can not wait to see it fly. It's beautiful.

[F3HDemonDriver]

@jauchiu Thankyou! Me to!

[xmind22]

absolutely love your models!! keep it up and keep updating us with your videos.. :)

[F3HDemonDriver]

@xmind22 I'm greatfull! thankyou!

[1995marines]

hahahaha ITS DONE FANTASTIC WORK!!!!!

[F3HDemonDriver]

@1995marines Thankyou for watching 1995Marines!