Added: 2 years ago
From: sunnys14
Views: 8,301
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (38)

Sign In or Sign Up now to post a comment!
  • S13 driver is a great driver it has an Enthalpy ROM tune with 740cc injectors.

    S14 KA has an Enthalpy ROM tune with 850cc injectors.

    The turbo the s13 was running is my old turbo.

  • i love how every KA person says the SR sucks and every SR person calls the KA a whack truck motor, its all about preference, its that simple i highly doubt nissan makes a performance motor thats even close to be considered bad and everyone will always have there own opinion. These 2 cars do not have the same set up and for all we know the guy in the SR could be a horrible driver, bad tune, small injectors, and the list goes on, but to say either 1 sux is retarded when they both put up crazy hp

  • @nykillak123 I wanted to put together an sr20 but I think the ka-t is a cheaper route and I want to keep my ac and I will either build it up later on or if I got the cash maybe a rb25 or 2jz idk how much the rb swap is but the 2jz swap is about $6k cuz of all the suporting mods

  • @DcEvoIX its all about preference, how much power you looking to make? do you want a 4 banger or want an inline 6? i loved the ka bout i personally think the rods are too long i broke rods left and right and i was tired of em even on a built motor, i can say that not everyone had this problem so i switched to an sr, and i used to hate sr's until my boy walked me lol but his was rele good, but rb is def a good project thats what my friend has not and he loves it, jus a lil more expensive to do

  • @nykillak123 yea as of know I'm just looking for 350whp till I'm where I want to get to with drifting I love the sr so much but I don't know how expensive the swap is and I want my air conditioning the rb is like the 1 that if I had the $ to go nuts it would be something to marry lol but as of now I just want a reliable turbo swap since I've been low on cash

  • @DcEvoIX the sr swap isnt too expensive, i dont know your budget, but its probably the cheapest route, to turbocharge and build a ka will cost more, even though when you do the sr to get to 350whp you will need a bigger turbo and supporting mods. so would you rather build a KA to make 350whp or have a stock sr with supporting mods to do it, you can keep your a/c and idk where your from but i usually spend about 1500-2000 depending on sr, theres plenty of sites and different prices

  • @nykillak123 yea I was doing some research last nite I'm deff goin to do the sr I can get the motor for 1500 but suporting parts for the swap will come out to around $2500 and I want to do the swap myself just trying to make sure my boy knows how to wire it cuz why spend 300-400 for someone to wire it when I can spend like 500-600 and have the swap done right

  • @nykillak123 and I'm from jersey just across the lincoln tunnel

  • @DcEvoIX tru tru, well this time im going to have a premade harness made from wiring specialties, its a brand new harness that plug and play and it just seems like a great idea, im not sure when but soon i will and ill just get rid of my old one, your in jersey your good man you got so many engine spots down there, good luck with the swap, let me know how it comes out, which sr you gteting s13 redtop?

  • @nykillak123 yea I figure why get the black top for a couple less miles they come from japan where they only see 35-45k miles which is like a nice break in period for the stock turbo so you give it like a 500 mile rebreak in and your rippin it after and I have a hard time finding nissan shop the guys at certified racing are good friends of mine so I might do it through them

  • @DcEvoIX Sounds great man, well let me know if you have any questions, if i dont have the answer i kno someone who does, how soon you getting the project started

  • @nykillak123 will do, and I hope to have it done by september hopefully I want to enjoy it a lil before the winter hits

  • I trapped 120 at 14.5 psi.

    I'll run you again next time, but you're gonna need to bring more than cams haha

    Maybe a KA will let you stand a chance.

  • you i had a exhaust leak.... my car is running so much better now... 12.4@ 119.873mph. 60 foot needs work. no cams or engine work.

  • GT3071R is not at all the same as a GT2876R. The GT3071R has a much bigger exhaust housing, if you want to compare engines, compare them with the same turbo. Both are nice engines that can be capable when given some TLC.

  • @wanteds13 Yes, they are not the same, the GT2876R has a much bigger compressor wheel than the GT3071R.

    Then GT3071R does not have a bigger exhaust housing, it has a bigger turbine wheel but smaller compressor wheel. Can you even read the turbo specs?

  • @sunnys14 Oh really? Your car sounds like it has a screamerpipe so you probably aren't running the internal gated T2 based .64 A/R exhaust housing on your 3071 now are you?

  • It's all about the motor.

  • KA-T FTMFW! got love for those SR's to

  • Ka all the way!!!!

  • The GT2876R is almost the same size as the GT3076R. Only rated 50hp less.

  • @sunnys14 yeah but 50hp makes a hell of a difference

  • why does every hate, SR > KA or KA > SR, sr sucks blahhh.. there both NISSAN engines. every one has their own opinion.

    and then again, the SR only had a T28, while the KA had a GT30... anways Nissan FTW

  • ka all day dog. i cant wait to go ka-t on my single cam. im almost ready

  • sr's are a waste of .4 liters.

  • Lol that was to fast to be considered walkin him, you straight up pulled him. Well done well done.

  • Freakin awesome...SRs suck!!

  • "a little faster" ?? Looks like you pulled two cars on him.

  • Pulled alot more than "2" cars.

  • looked like he gave up half way through though.

  • He said he didn't give up until he saw my brake lights.

  • well damn. yeah KA > SR

  • =) if my KA-t ever decides to coopererate with me and run right lol (mystery problem, i promise) i wouldnt mind lining up with an sr on a close set up as me.

    props on the set up and the win tho.

  • thats the same size turbo size i wanna put on my s14 ka. nice kill tho :) ..........is that on stock internals though or did you throw some forged internals in there???

  • its in the vid description

  • besides if you dont mind me asking what is your setup?

  • KA'S are beasts period. I have a t25 KA-t and it pulls pretty dang hard at 7psi.. let alone a bigger turbo and more boost itll be scary fast lol

  • good race, for you, haha

    in for the sr lovers making up BS stories about how cast iron truck motors suck :))

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more