Xbox 360 HGC Myth Buster (Video 1) Lead Free Solder

[Elmendigovato]

Good shit bro!

[bobtheguy100]

@266BULLDOG Yeah, zypher was made for hdmi purposes. Then came falcon, which apparently has a smaller sized CPU chip(or thats what I've been told) and has a better GPU heatsync. After that comes Jasper which ive been told has a smaller CPU and GPU chip.

[HGCGamersClub]

@bobtheguy100 I am in the middle of videoing all the motherboards by year to show you all what was dun starting with first gen all the way to last gen so you can be the judge as to what was actually dun concerning red light prevention all will be revealed at the end of the mega giveaway.

[Naizarak]

Did you know that the very first batch of production Xenons had lead-based solder? Did you know they stopped using it to meet European environment protectionlaws? Did you know that the PS3 and Wii also use lead-free solder?

Didn't think so.

[HGCGamersClub]

@Naizarak Did you know that the use of led solder in the production of electronic was outlawed in the US before 2003+/-1 year and not one of the Xboxes as far as I know of ever had led solder? I have yet to find a single first Gen Xbox 360 or any other! With led solder unless it had Ben re-balled by a unauthorized repair man, and i have repaired over 4,000 360 units! So I believe you to be mistaken.

[fresnonoriega]

hey daniel, is th newer xbox 360 slims flashable now? just want to konw so i can upgrade and stop to get it flashed

[HGCGamersClub]

@fresnonoriega yes but I will not be offering slim flash fore a wile yet right now it would be $130 to flash the slim

[266BULLDOG]

@HGCGamersClub Hey do you know anything about the Jtag? I own a Jasper motherboard and also wanted to know how all three motherboards are different and why MS chose to built them that way.

[HGCGamersClub]

@266BULLDOG Other than the fact that each one was built by a separate manufacture? I could not tell you what the heck they were thinking? There is not a whole lot of difference truthfully, they only arranged a few components differently from one model to the next perhaps trying to make it more difficult for you to find ways to modify the boards

[266BULLDOG]

@HGCGamersClub Do you have knowledge regarding the Jtag? I was curious to know since MS did all this BS if they had purposely left an exploit on their system so that Jtaging was possible to run unscripted code. Most of the stuff I do on mine is purely for fun. And now since they just recently found out that the new slim can also run some unscripted code via destabilizing the system and tricking the system to run the code. Here's a link. watch?v=JyYdL4L6vwE&feature=pl­ayer_embedded

[HGCGamersClub]

@266BULLDOG No. I know enough to do it but I do not. I am more repair than program hacking I do not have time for that I leave that to the hackers with the more specialized equipment and time to pull programming out of individual chips and go threw it line by line looking for vulnerabilities

[fresnonoriega]

@HGCGamersClub hey daniel can i ask how long it will be before you will be flashing the newer slim 360 models? why so much compared to the old boxes? in your opinion, is the newer slim boxes better then the older versions? just curious because i want to get a new box, but not sure if i should go with the newer slim box or the older elite version box.i want to get it flashed either way, so i can play my back ups

[HGCGamersClub]

@fresnonoriega IDK I guess I can flash it if you want? But you will need to buy a $75 replacement board then I will charge you $50 I may bring that up to $60 because it is more involved to flash! But at this time I think it is just to expensive to risk getting your Box Ban from live, if you want to do it ok but I would hold out for cheaper method?

[fresnonoriega]

@HGCGamersClub hey dan, if you flash the newer slim boxes, is there anything different that has to be done to play back ups? like do we have to use some kind of activation disk? just curious, i want ot konw what im getting into before i pick up a new slim system. whatever the cost to flash, i still want to bring it to you. your the only repair man i trust with an xbox

[HGCGamersClub]

@fresnonoriega I have everything I need to flash the slims but I do not offer slim flash at all because after May 19 all drives are locked and you must buy a $75 SR replacement and $60 for the flash. That is a lot of money for the risks involved if you want your slims flashed find someone ho dues not care about your Xbox. I am hoping soon we will find a cheaper easier way to flash the drives then perhaps I will offer the slim flash.

[xitzjonnyx1]

i think you should create a website explaining all of this and visitors must make an account to enter in your drawings and watch your videos so that way it would be easier for you and people would think youre more legit rather than a youtube channel in which you say all these youtube channels are scams. people may think youre a scam too imo. i know you already have a website but you should expand it rather than this youtube channel.

[HGCGamersClub]

@xitzjonnyx1 I will be expanding my website with all this, but I will not be using a format that requires making an account. I can not stand that! every time I open a account from a website like that I get spammed very bad and incase you did not notes I do not allow advertising on my channel unless I approve of what is being sold and I never send an email unless it is a response to a question.