watercooled my xbox 360, parts video

[TheJacx2000]

where do iu get the waterblock from m8

[TheJacx2000]

where did u get all the parts from

[Ri1seAgainst]

@AJimenez1992 no, you use a non conductive liquid solution

[kr3wmodz]

theres no point in putting fans if u water cool trust me i build custom xboxs all the time for my fans

[boostedboogie]

@kr3wmodz you can't cool coolant or water with a room-temp radiator. radiators are designed to be air-cooled. there's no way you're going to be able to cool an entire car without a radiator. that's why they put intercoolers and radiators up front where they can be cooled down by airflow. there is a 30+ degree celcius difference in a radiator that's cooled by some sort of fan or airflow in my experience of building high-end gaming rigs. if you don't cool the radiator, it'll just collect heat

[KIDWITAGUN]

that's crazy water so close to electronic parts haha ftw...

[TseeJoksta]

yea if i have a camera....

[ReefAdvicer]

hey i know all the parts are from xspc but what kind of radiator i found the waterblock but can i have a list of all the parts thanks

[tom2197]

i need this dont what rrod on me jtag

[drift4life123]

were u get the big as fan from dnt say walmart coz i live in new zealand and we dnt got 1 :) any other place like online or somer ?:)

[CobraGMW2]

OC it!

[garretts228]

That xenon will never red ring :D

[justin7674]

NUUU u still need the fans because the other inner components still heat up

[boostedboogie]

@justin7674 never had any problems yet

[trigg35745]

hey whats up need a lil help what fittings did you get for the water block on your vidand the tubing i know its 3/8 id but whats the od. what about online would this get you banned from xbox live any help would be appreciated thx.

[boostedboogie]

@trigg35745 OD for any 3/8 ID should always be 1/2". and never been banned yet

[TseeJoksta]

u need to buy a smaller pump get it from swiftech... radiator: buy a 120mm radiator and the fan... keep the water block... try to buy fitting nozzels... let the radiator sticking up and the fan inside of the 360.....

[boostedboogie]

@TseeJoksta yeah that's probably how you'd build yours. can't wait to see it if you ever do.

[777shayne777]

I Hand a question about your video im buying a modded xbox and was woundering where you percussed this parts.?

[trumpetgod15]

should get a lian li xb01. wouldnt have to worry about all of the cutting

[boostedboogie]

yeah but everyone has that case. i like my fatlace personalized one and maybe later down the road, i'll get the lian li case, but for now, i prefer my original case

[rockerfellaz]

you need to think this over the water block will not mount the way you directed it, the barbs and the piping need to be consider - the cd drive needs to slot in, so you'll have to switch the water block round 180, check out my videos you really need a differenct case

[boostedboogie]

actually i think you have it the other way around. if i switched the block around, the barbs will hit the dvd drive

[randomassbalaclava]

xbox blows why would u watercool it?

[eatfreshsub]

If you think the 360 blows, then your missing out on alot of good exclusives. Get a job and stop being a bitch, get all systems and stop trying to backup your purchase by trying to put down somebody elses.

[zeroreal1ty]

what is that waterblock called.. where can i get one??? that thing is perfect to watercool my xbox!

[boostedboogie]

from what i understand, i recieved one of the last units and the company was disbanded.

[123454d]

were do you put your dvd drive and doz it help keep cool

[123454d]

just put holes in your casing for water for you can put your case back on