@zedomaxn Please help me. i followed all your steps now my phone is stuck on the HTC splash screen. but i do have the revelution recovery. i have tried factory reset. doesint work, please helpppp
after i but the unlock_code.bin on the command prompt it says it was successful but then nothing happens on my phone it stays the same. no lock comes up on the screen or anything
hey i need help im stuck at the part where after you put all that stuff in the command program? i did all that but now its stuck and says that its finding the device, and its taking a long time to find the device please help mee!!! please reply back asap
NEED HELP!!! i had the problem of not getting the unlock bootloader screen after entering fastboot flash unlocktoken Unlock_code.bin I took the advice of forums of on the internet saying update the RUU and the same problem still persists! please help!!!
Everything works for me n is installed successfully but my phone never show the Unlock Bootloader? Screen. It says successful on all recent steps and I realized im not the only 1 having this issue.
I followed the instructions and rooted my Evo 3D successfully. However, after the root, the phone will not charge from neither my PC or the wall when the phone is on. Have you had this problem before? What can I do to fix this problem? Thanks
Whenever I enter the fastboot flash unlocktoken Unlock_code.bin and hit enter, my phone doesn't take me to the unlock bootloader screen. Any tips? I'm on 2.17.651.5
@RichboyJhae I'm stuck at the exact same thing. Type in the command twice and your phone is unresponsive to all the buttons until you unplug it from the computer. 2.17.651.5
@cowkong I found a fix for it. Just find an RUU for 2.17.651.5 then connect your phone to your computer and run it. After that redo all the processes in this video and it should work fine.
help help..i rooted so i flash a custom rom work fine but after i install rcmix kernel the phone keep restart when see the HTC logo..i tried to use my backkup rom..ut same thing..help pls
For some reason whenever I unlock the bin, it never asks my phone to unlock the bootloader. Any idea?? I got the code and put it in the dev site and got the bin and typed into the command prompt and it says unlock token check succesfully..but my phones still lcoked and hasnt cchanged screen!
I don't know what your problem could be. I would make you installed the drivers for the phone. You also need to make sure you actually got the correct token. You would to have selected a phone. Make sure you selected the 3D instead of the 4G to get the correct token bin file. Does your phone say "Unlocked" in Purple or still saying locked?
Worked great for me. I'm using the 2.08.651.3 and it worked like a charm. Thanks so much for your time, and videos. I really appreciate it. How about doing a tutorial on getting Straight Talk to work on the HTC Evo 3D!!!!! HINT HINT.
@iornhyde After that you need to copy it to your folder in c:// Make sure your phone is in USB Fastboot. Open command prompt and go to the folder you copied Unlock_code.bin to and type "fastboot flash unlocktoken Unlock_code.bin" without the quotes. After that you will get the prompt and use the volume up button to select yes and power to apply.
@iornhyde Interesting..."Okay" should display something other then 0.000 seconds. Try taking the battery out of the phone. Boot backinto bootloader and put it in fastboot making sure the cord is in. and hit power on fastboot it should now say "USB Fastboot" try it again and see what happens.
I have rooted my phone (hboot 1.5) according to your video (great work) and have since "rebooted". Now the tethering dosent work (you mention this at the end of the video). Is there a simple/fast procedure to get it to work again?
This doesn't work for hb1.5, and your video for mac sucks. You need to make q better video for mac, how you are using windows and said it works on mac when it doesn't
Hello Zedomax. Thanks for posting this. I'll make a donation if I can get this solved!
I'm having problems at 9:45 into the video. I have the "Unlock S-on".
When I type "Fastbook Flash Recovery cwm-4.0.1.4-shooter.img" I get the following message in the command prompt: error: cannot load cwm-4.0.1.4-shooter.img
I am sooo close! Arrgh! Can you please help me? Thanks in advance! =-)
@zedomax hey i done evrey thing like this everything works but only the clockwork recovery doesn't works. when i do this dhe phone restarts in normal mode an i done this with hboot 1.5 video too
@zedomax I do not see it. I see a file called recovery-clockwork-4.0.1.5-shooter.img but NOT the cwm-4.0.1.4-shooter.img (When I downloaded all those files, cwm-4-0.1.4-shooter.htm was not included) Maybe you could point in the right direction to get that file. Thanks for your time.
Nothing happens after the unlock_code.bin. Im on the latest OTA 2.17.651.5. Maybe this could be the problem and this OTA doesnt currently work. I know an HBOOT cannot be downgraded, but how about the OTA? Possibly flash the 2.08 RUU? Let me know if anyone has answers or help.
to everyone having a problem at 6:50 with nothing happening you have to download the new RUU for the Evo 3D! send me a message and i'll give you the link on where to get it!!!
Dude I tried this but before the last reboot it says connection to phoned interrupted and doesn't finish the root process but it does get s-off, so i tried installing a zip from recovery and it said it couldn't find the file when it clearly showed all the files
@bcb116 Yes it might but usually Sprint is cool about it, I took my Evo 3D back fully rooted with custom ROM, the guy literally took it out of my hands (so he can have it) and gave me a brand new phone.
hey Zedomax i have a question how to get rid of the s-on i got it unlock but when i'm on the command prompt and i type fastboot recovery cwn-4.0.1.4-shooter.img it doesnt load. what can i do?
i'm having same problem any ideas about step 13. Every time I enter "fastboot flash unlocktoken Unlock_code.bin" into the command prompt it says successful but the phone doesn't respond by going into the "Unlock Bootloader" screen. no unlock boot loader screen help thank
Hey Zedomax I have a question about step 13. Every time I enter "fastboot flash unlocktoken Unlock_code.bin" into the command prompt it says successful but the phone doesn't respond by going into the "Unlock Bootloader" screen. Do you have any ideas as to what's going on? Thanks in advance for any response.
Hmmmm for some reason i am unable to begin the unlock booter proccess, everytime i attempt to click on it I am asked to login then redirected to a different page then asked to login once again????? any ideas or help as to why it is doing this?
@zedomax I'm stuck on step 13.. "fastboot flash unlocktoken Unlock_code.bin" I type that into the command prompt, and I get this message "error: cannot load 'Unlock_code.bin' " I have done all of the other steps correctly, I even went back and started from the beginning once more just to make sure. A timely response would be appreciated, but I know you have other matters. Happy New Years and thank you for your help.
@zedomax Phone is on Fastboot right now, just plugged into the usb, I have the Unlock_code.bin file in the folder "C:\Users\David\Desktop\rootevo3dnew" where it appears at the bottom of the list, under the folder "su-2.3.6.3-efgh-singed" I run the cmd (under C:\Users\David\Desktop\rootevo3dnew>) "fastboot flash unlocktoken Unlock_code.bin" and this is where I get the reoccurring error. Again, thank you for your response
Yea. I rooted it thanks, but you could of have told us it deletes everything BEFORE you started. Wtf mna.. but I give you props for the only good tutorial.. still :/
wow, seriously...update this and please put that it deletes contacts and apps, dont wait till the person is halfway in the root. and say oh yea i forgot to tell u guys that it might delete apps and stuff. smh...but other than that thanks.
@zedomax so I have the newest update which is 2.08.651.3 update, does it work the same way? My phone is CDMA, I just wanted to be sure if there is a major difference if I used this video or not. Thanks
Its weird cuz ive done it many times ! And have gotten bootloader unlocked everytime. Ive even sent the token to my pjone and trying to copy and paste it and the same error so its not my pc what is it the ?
IM GETTING A " UNLOCKING BOOTLOADER FAILED" NO DESCRIPTION IT JUST SAYS THAT AFTER I ENTER THE TOKEN AND THERES NO ERROR IN THE TOKEN NO SPACES! I TRIED AN UNLOCKED EVO READ TOKEN AND GOT SAME MSG AFTER PASTING THE CODE AND SUBMITTING IT ... I KNOW BOUT THE SPACES ETC THIS IS SOMETHING DIFF
What up Z .... JUST WANTED TO POINT OUT I DID TWO EVO 3D A FEW DAYS AGO AND THE HTC DEV DID SENT ME THE UNLOCK BIN I GOT THE BOOTLOADER OFF EVERYTIME! TODAY I GOT NO LUCK WITH TWO DIFFEVO 3D BOTH HD SAME HBOOT AND I DID GOT THE IDENTIFIER CODES BUT WEN I PASTE HEM CORRECTLY WITHOUT SPACES LIKE I'VE DONDE SCCESSFULLY IN THE PAST I GOT THAT UNLOCK BOOTLODER FAILED AND I TRIED MANY TIMES AND EACH TIME I WOUL GET A DIFF TOKEN. ANDEACH TIME I WOULD GET TE ERROR! PLEASE CHECK site AND REPLY IT
I'm currently using a mac to root my eve 3d. I made it to step 21 or 22. Every time I try to install the "su-2.3.6.3-efgh-signed.zip" in the clockwork, it keeps saying it can't open it (bad) and installation aborted. Ive tried unzipping the file but it just ends up turning it into a folder that removes the ".zip" and when I try to install that new file that suppose to be unzipped in the clockwork, it brings me to two options; meta-inf/ and system. In other words, it won't directly install.
I understand that I have to root the EVO 3D in order to be able to install a custom ROM, but all I want is to be able to run the STOCK Google/Android ROM/software on it because I hate HTC Sense. Is this possible?
Plz shoot some help this way.good video n it worked for my phone.tried to do wife phone,its same as mine,EVO 3d,but for some reason with her phone I never get the promt on the phone that says ' unlock bootloader' that gives me to choice to pick yes or no.plz help.did everything right in but still won't work.why is that????
so i downloaded the rootevo3dnew. its in my downloads and in the c drive, i clicked on the c and pasted it there as well. i open the cmd and try and type both places but all it ever says is (c:\Users\user>c:\rootevo3dnew is not recognized as an internal or external command, operable program or batch file) i have tried everything idk what im doing wrong can u please help me i really want to root my phone! my email is envihb@gmail.com if u could further dummie this for me lol
ive done everything correctly up until i type "fastboot flash unlocktoken Unlock_code.bin" it responds saying error: cannot load 'Unlock_code.bin' idk what to do!! lol fk
when i try to flash the cwm recovery image it won't let me. ive tried to flash like 3 other versions of the image but it still won't let me. the phone is unlocked i just can't get this to work. any idea what's wrong with it?
Love the video man. Quick Question:There is no way to "unroot" after using this method because of the permanent watermark saying that the phone has been unlocked right?
thanks you! i got stuck on step 18, installing revolutionary and making it my recovery mod, however i looked up another video to show me how to install a different recovery mod and it worked wonders! its teamwin recovery. it does everything automatically without having to insert commands (for those of you, like myself, that hate them) and now i have my fully rooted evo3d! :D time to install some ROMs
i am not getting the Revolutionary CWM blue menus but i have done done it on the cmd and it said it has finished but i am not getting the Revolutionary CWM blue menus can u please help me with that :S
My phones updated and rooted, but when I run Open Garden's version of wifi tether I keep getting error messages when it tries to activate the wifi interface....can anyone help?
Iam stuck on step18 on root EVO 3d later version. Step 18. Type the following to install ClockworkMod Recovery: fastboot flash recovery cwm-4.0.1.4-shooter.img After I put this in the cmd line it will prompt sending recovery and it was stuck there it never said finished. Can any help me get pass this to finish rooting.
One more thing, I tried the perma temp but when the script finished running I got a message saying operation not permitted. Do have a fix for this? I am running the latest version hb 1.5.
Hi Max I just watched ur video for rooting EVO 3d and want to do it but has a question about the code u need from HTC. I read somewhere that HTC reports the unlocking to the carrier. Do u know if there is any truth to this? Thanks!
thnx man it worked
lazyjcl 6 hours ago
I made it all the way to flashing CWM from command prompt. but when I try and do this it tells me
C:\rootevo3d>fastboot flash recovery cwm-4.0.1.4-shooter.img
sending 'recovery' (4832 KB)...
FAILED (remote: not allowed)
finished. total time: 0.001s
any ideas???
tad3f 6 hours ago
@zedomaxn Please help me. i followed all your steps now my phone is stuck on the HTC splash screen. but i do have the revelution recovery. i have tried factory reset. doesint work, please helpppp
TheMythic1234 1 day ago
Comment removed
TheMythic1234 1 day ago
after i but the unlock_code.bin on the command prompt it says it was successful but then nothing happens on my phone it stays the same. no lock comes up on the screen or anything
Juline1221 3 days ago
hey i need help im stuck at the part where after you put all that stuff in the command program? i did all that but now its stuck and says that its finding the device, and its taking a long time to find the device please help mee!!! please reply back asap
angelsolis801 4 days ago
Will it factory reset?
yoyodude1124 4 days ago
NEED HELP!!! i had the problem of not getting the unlock bootloader screen after entering fastboot flash unlocktoken Unlock_code.bin I took the advice of forums of on the internet saying update the RUU and the same problem still persists! please help!!!
tryoung524 1 week ago
This has been flagged as spam show
I did the unlock_code thing and it didnt work my 2.17.651.5 Does this still work?
theXmercenaryXmaniac 1 week ago
Can anyone show me how to root HTC sensation XL please? A thousand thanks :)
xtacee1990 1 week ago
I Did Everythin like u said but the unlock bootloader wont show up on my phone . Wat do i do ?
TheTwalk12 1 week ago
Nevermind i had to download a stock RUU file rename it to PG86IMG.zip n update in bootloader then do the steps again and it worked perfectly.
LamarW89 1 week ago in playlist Evo 3D
Everything works for me n is installed successfully but my phone never show the Unlock Bootloader? Screen. It says successful on all recent steps and I realized im not the only 1 having this issue.
LamarW89 1 week ago in playlist Evo 3D
My Software Number Says 2.17.651.5 Does this still work ?
TheTwalk12 1 week ago
So a tut for mac please
riskierrabbit18 1 week ago
I successfully managed to get root, now 4G won't work.. :c Help?
Jimlarck1 1 week ago
my phone wont get to the unlock bootloader screen.. what should i do?
samabad95 1 week ago
worked like a charm :), very easy to follow. it helps to have the video playing with the instructions on the side
RPH4T 2 weeks ago
I followed the instructions and rooted my Evo 3D successfully. However, after the root, the phone will not charge from neither my PC or the wall when the phone is on. Have you had this problem before? What can I do to fix this problem? Thanks
jvelez2011 2 weeks ago
bloody hell, cant even get in to recovery it keeps starting the phone
MW2mostwanted 2 weeks ago
hi, i have unlocked the bootloader through htc dev, will this method work for htc evo 3d gsm??
MW2mostwanted 2 weeks ago
I have no internet dummi.. y u think I'm tryna get free internet off my phone... Is there a way to do anybody jus on my phone
solokidd203 3 weeks ago
no luck :( 1.50
kachh 3 weeks ago
This has been flagged as spam show
i have 2.08.651.3, will this work?
LILZONE93 3 weeks ago
Comment removed
Streetbros 3 weeks ago
Whenever I enter the fastboot flash unlocktoken Unlock_code.bin and hit enter, my phone doesn't take me to the unlock bootloader screen. Any tips? I'm on 2.17.651.5
RichboyJhae 3 weeks ago
@RichboyJhae I'm stuck at the exact same thing. Type in the command twice and your phone is unresponsive to all the buttons until you unplug it from the computer. 2.17.651.5
cowkong 3 weeks ago
@cowkong I found a fix for it. Just find an RUU for 2.17.651.5 then connect your phone to your computer and run it. After that redo all the processes in this video and it should work fine.
RichboyJhae 2 weeks ago
@RichboyJhae same issue here
ooL1TH1UMxD 1 week ago
I cant download files
AreYouHappyYet 3 weeks ago
worked like a charm
MrK1ng159 4 weeks ago
wait why cant you flash kernels?
immajew69 4 weeks ago
help help..i rooted so i flash a custom rom work fine but after i install rcmix kernel the phone keep restart when see the HTC logo..i tried to use my backkup rom..ut same thing..help pls
Limkent2300 4 weeks ago
i can confirm that this is working on 2.17.651.5 just ruu the new software and it should work i just did mine right now.
drumsforjs 1 month ago
does it work on 2.17.651.5?
Streetbros 1 month ago
@Streetbros yes sir it does just ruu the new firmware and walla abra cadabra.!
drumsforjs 1 month ago
anyone know how to get revolutionary to work with HBOOT 1.50
aquatikz 1 month ago
@aquatikz revolutionary only works with < HBOOT 1.50.
zedomax 1 month ago
hey y i press recovery and it jz start up the phone directly witout going cwm..pls help tq
Limkent2300 1 month ago
what do i do when on the htcdev sight it says *indicates HBOOT update required
foamleg 1 month ago
@foamleg Use the revolutionary method instead. Much better method to root.
zedomax 1 month ago
For some reason whenever I unlock the bin, it never asks my phone to unlock the bootloader. Any idea?? I got the code and put it in the dev site and got the bin and typed into the command prompt and it says unlock token check succesfully..but my phones still lcoked and hasnt cchanged screen!
PSBrathwaite 1 month ago
I don't know what your problem could be. I would make you installed the drivers for the phone. You also need to make sure you actually got the correct token. You would to have selected a phone. Make sure you selected the 3D instead of the 4G to get the correct token bin file. Does your phone say "Unlocked" in Purple or still saying locked?
topwebz 1 month ago
i need help so i did everything like you said but it does not give me the option to unlock the bootloader? i have 2.08.651.3 where did i go wrong?
iornhyde 1 month ago
On mac I keep getting permission denied in the terminal after typing "./fastboot-mac oem..... "
thatguytopher 1 month ago
@thatguytopher do chmod 755 *
zedomax 1 month ago
I want their help please my HTC EVO 3D root someone help me ?????
004thebest 1 month ago
Worked great for me. I'm using the 2.08.651.3 and it worked like a charm. Thanks so much for your time, and videos. I really appreciate it. How about doing a tutorial on getting Straight Talk to work on the HTC Evo 3D!!!!! HINT HINT.
topwebz 1 month ago
@topwebz Thumbs this up for your request to have SedoMax do a Straight Talk Tutorial!!!!
topwebz 1 month ago 2
@topwebz can you help me out? i keep on getting stuck where it gives you the option to unlock the bootloader please help thnaks
iornhyde 1 month ago
@iornhyde Did you get an email with your unlock_code.bin file?
topwebz 1 month ago
@topwebz yeah but after that nothing happens
iornhyde 1 month ago
@iornhyde After that you need to copy it to your folder in c:// Make sure your phone is in USB Fastboot. Open command prompt and go to the folder you copied Unlock_code.bin to and type "fastboot flash unlocktoken Unlock_code.bin" without the quotes. After that you will get the prompt and use the volume up button to select yes and power to apply.
topwebz 1 month ago
@topwebz i did that too but the prompt never shows
iornhyde 1 month ago
@iornhyde Whats it say in command prompt after you type fastboot flash unlocktoken Unlock_code.bin?
topwebz 1 month ago
@topwebz sending 'unlocktoken' (0 KB)...
OKAY [ 0.156s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.000s]
finished. total time: 0.156s
iornhyde 1 month ago
@iornhyde Interesting..."Okay" should display something other then 0.000 seconds. Try taking the battery out of the phone. Boot backinto bootloader and put it in fastboot making sure the cord is in. and hit power on fastboot it should now say "USB Fastboot" try it again and see what happens.
topwebz 1 month ago
@topwebz sending 'unlocktoken' (0 KB)...
OKAY [ 0.141s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.016s]
finished. total time: 0.250
an nothing still comes up
iornhyde 1 month ago
@iornhyde Your phone says Fastboot USB highlighted in red right?
topwebz 1 month ago
@topwebz yup
iornhyde 1 month ago
When I tried to get the identifer token the bootloader gave me an error. I've tried updating the OTA HTC but no luck.
desihaxx0r4life 1 month ago
I have rooted my phone (hboot 1.5) according to your video (great work) and have since "rebooted". Now the tethering dosent work (you mention this at the end of the video). Is there a simple/fast procedure to get it to work again?
1videorick 1 month ago
This doesn't work for hb1.5, and your video for mac sucks. You need to make q better video for mac, how you are using windows and said it works on mac when it doesn't
Djimmycleef85 1 month ago
Hello Zedomax. Thanks for posting this. I'll make a donation if I can get this solved!
I'm having problems at 9:45 into the video. I have the "Unlock S-on".
When I type "Fastbook Flash Recovery cwm-4.0.1.4-shooter.img" I get the following message in the command prompt: error: cannot load cwm-4.0.1.4-shooter.img
I am sooo close! Arrgh! Can you please help me? Thanks in advance! =-)
TheSacramentoSkyline 1 month ago
Whoops! I meant "Fastboot" not Fastbook! Typo. LOL! Stil the problem persists! Your assistance will be greatly appreciated.
TheSacramentoSkyline 1 month ago
@TheSacramentoSkyline you are probably in the wrong directory, do u see the file when you type "dir"?
zedomax 1 month ago
@zedomax hey i done evrey thing like this everything works but only the clockwork recovery doesn't works. when i do this dhe phone restarts in normal mode an i done this with hboot 1.5 video too
muschkeepensi 1 month ago
@zedomax I do not see it. I see a file called recovery-clockwork-4.0.1.5-shooter.img but NOT the cwm-4.0.1.4-shooter.img (When I downloaded all those files, cwm-4-0.1.4-shooter.htm was not included) Maybe you could point in the right direction to get that file. Thanks for your time.
TheSacramentoSkyline 3 days ago
@TheSacramentoSkyline do you have the 2.17.651.5 software?
ewelly81 1 month ago
Does this work on the latest update android just did?
WilliamThaTruthTV 1 month ago
is there a way to root with the new sprint OTA udate?
paris12396 1 month ago
Nothing happens after the unlock_code.bin. Im on the latest OTA 2.17.651.5. Maybe this could be the problem and this OTA doesnt currently work. I know an HBOOT cannot be downgraded, but how about the OTA? Possibly flash the 2.08 RUU? Let me know if anyone has answers or help.
AhmedMajid786 1 month ago
to everyone having a problem at 6:50 with nothing happening you have to download the new RUU for the Evo 3D! send me a message and i'll give you the link on where to get it!!!
skatervolcom124 1 month ago
@skatervolcom124 Dude I need this! Send me the link please ;)
XTheGamerGuildX 1 month ago
Comment removed
XTheGamerGuildX 1 month ago
Im on cmd and i typed in the unlock_token.bin thing and it doesnt do anything to my phone it still shows the white screen that says fastboot usb
help :[
losethegamelol 1 month ago
@zedomax, I follow the instructions giving and got an error on (cmd) it say's
C:\rootevo3dnew>fastboot oem get_indentifier_token
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.010s]
finished. total time: 0.010s
need help please!!
sharpdigital510 1 month ago
im at3:12, and it "cant find the specified path" when i type cd \rootevo3dnew and cd Desktop\rootevo3dnew. what do i do?
Sayewut2011 1 month ago
Did every step everything went smooth and its all 100% working! subscribed and liked! thanks!!
OCJester1562 1 month ago
Hey Zedomax, why does it say "waiting for device" after I put in the get tokens command? Any suggestions? Thanks!
bbwarmth 1 month ago
Awesome this also works with the newest version 2.08.651.3. Back to a fully rooted phone, thanks man!!!
jimtornado12 1 month ago
@jimtornado12 i have the same phone can you help me out with rooting? thanks
CeeMyLace 1 month ago
Do you know if there is any way we can get ICS (icecream sandwitch) on htc evo 3d
(sprint) cdma type phone?
ab110466 1 month ago
Dude your step by step instruction rocks *****
ab110466 1 month ago
I want that Cover, whats the name, and How i get 1
santeria007 1 month ago
After wasting 6 hours on the "other guys videos" I rooted my Evo 3D by watching this video and it went SMOOTH. You are a freaking HTC Evo King!!!!!!
MegaNick5678 1 month ago
man! i can say I LOVE YOU!!!!!!!!!!!!! DAMN i thought i was never going to root this phone thc evo 3d rocks!
haroldblacklion4542 1 month ago
After pushing the Unlock_code.bin file to my phone it says successful in cmd but the phone does nothing and will not unlock bootloader, any ideas?
airik559 1 month ago
This has been flagged as spam show
This is a permanent right?
ZomNex 1 month ago
This is a permanent right?
ZomNex 1 month ago
This has been flagged as spam show
I'm stuck on 13 as well. Except it won't bring up the "bootlader unlock"SCREEN It's still stuck on the Fastboot USB screen..????
XZXJOKERXZX 1 month ago
will this same method work for the sensation?
LILFL3X 1 month ago
This has been flagged as spam show
PLEASE PLEASE @zedomax help! I have problems when i say this (C: \ rootevo3dnew> fastboot flash Unlock_code.bin unlocktoken
sending 'unlocktoken' (0 KB) ...
OKAY [0.151s]
writing 'unlocktoken' ...
(bootloader) successfully unlock token check
OKAY [0.057s]
finished. Total time: 0.211s)
but the screen does not change my cell phone, I ask tells me nothing! thank you very much for your help
004thebest 1 month ago
wow.... thank u!!
09229om 1 month ago
Dude I tried this but before the last reboot it says connection to phoned interrupted and doesn't finish the root process but it does get s-off, so i tried installing a zip from recovery and it said it couldn't find the file when it clearly showed all the files
osvaldo8393 1 month ago
how do you back up your phone?
TheBabu406 1 month ago
@TheBabu406 Use recovery, its on my site!
zedomax 1 month ago
Im on 1.50 can I go bak to 1.40? if so how?
THANKS
1LASTAT 1 month ago
@1LASTAT no, cannot go back.
zedomax 1 month ago
Will this method tell sprint I'm rooted??
bcb116 1 month ago
@bcb116 Yes it might but usually Sprint is cool about it, I took my Evo 3D back fully rooted with custom ROM, the guy literally took it out of my hands (so he can have it) and gave me a brand new phone.
zedomax 1 month ago
@zedomax or a custom ROM that is stock took 2 back
lds44 1 month ago
hey Zedomax i have a question how to get rid of the s-on i got it unlock but when i'm on the command prompt and i type fastboot recovery cwn-4.0.1.4-shooter.img it doesnt load. what can i do?
maxicastello 1 month ago
This has been flagged as spam show
@zedomax help! I have problems when i say this (C: \ rootevo3dnew> fastboot flash Unlock_code.bin unlocktoken
sending 'unlocktoken' (0 KB) ...
OKAY [0.151s]
writing 'unlocktoken' ...
(bootloader) successfully unlock token check
OKAY [0.057s]
finished. Total time: 0.211s)
but the screen does not change my cell phone, I ask tells me nothing! thank you very much for your help
004thebest 2 months ago
This has been flagged as spam show
i'm having same problem any ideas about step 13. Every time I enter "fastboot flash unlocktoken Unlock_code.bin" into the command prompt it says successful but the phone doesn't respond by going into the "Unlock Bootloader" screen. no unlock boot loader screen help thank
electech5166 2 months ago
Hey Zedomax I have a question about step 13. Every time I enter "fastboot flash unlocktoken Unlock_code.bin" into the command prompt it says successful but the phone doesn't respond by going into the "Unlock Bootloader" screen. Do you have any ideas as to what's going on? Thanks in advance for any response.
TheAshman5000 2 months ago
Hmmmm for some reason i am unable to begin the unlock booter proccess, everytime i attempt to click on it I am asked to login then redirected to a different page then asked to login once again????? any ideas or help as to why it is doing this?
AjFiasco41 2 months ago
the mac instructions are not working for me. What gives?
prelude619 2 months ago
Comment removed
prelude619 2 months ago
Comment removed
prelude619 2 months ago
@zedomax I'm stuck on step 13.. "fastboot flash unlocktoken Unlock_code.bin" I type that into the command prompt, and I get this message "error: cannot load 'Unlock_code.bin' " I have done all of the other steps correctly, I even went back and started from the beginning once more just to make sure. A timely response would be appreciated, but I know you have other matters. Happy New Years and thank you for your help.
Nishbu 2 months ago
@Nishbu make sure you Unlock_code.bin file you received in your email in the same directory.
zedomax 2 months ago
@zedomax Phone is on Fastboot right now, just plugged into the usb, I have the Unlock_code.bin file in the folder "C:\Users\David\Desktop\rootevo3dnew" where it appears at the bottom of the list, under the folder "su-2.3.6.3-efgh-singed" I run the cmd (under C:\Users\David\Desktop\rootevo3dnew>) "fastboot flash unlocktoken Unlock_code.bin" and this is where I get the reoccurring error. Again, thank you for your response
Nishbu 2 months ago
@zedomax I'm stuck on 13 as well. Except it won't bring up the "bootlader unlock" It's still stuck on the Fastboot USB screen..????
MenelikeelamII 1 month ago
i have a 2.08.651.3 what do i do?????????
TheBabu406 2 months ago
su-2.3.6.3-efgh-signed.zip i copied it to my phone then i said yes then it doesnt say succesful like yours i tried like 5 times
TheBabu406 2 months ago
Comment removed
TheBabu406 2 months ago
zedomax help! I have problems when i say this (C: \ rootevo3dnew> fastboot flash Unlock_code.bin unlocktoken
sending 'unlocktoken' (0 KB) ...
OKAY [0.151s]
writing 'unlocktoken' ...
(bootloader) successfully unlock token check
OKAY [0.057s]
finished. Total time: 0.211s)
but the screen does not change my cell phone, I ask tells me nothing! thank you very much for your help
004thebest 2 months ago
step 18 failed..
cbrown6010 2 months ago
This has been flagged as spam show
@zedomax My phone is not showing the unlock the bootloader screen like u have in 6:50 i done everything right up till then please help
MrJayoneman 2 months ago in playlist Liked videos
Comment removed
MrJayoneman 2 months ago in playlist Liked videos
Comment removed
MrJayoneman 2 months ago
Comment removed
MrJayoneman 2 months ago
Yea. I rooted it thanks, but you could of have told us it deletes everything BEFORE you started. Wtf mna.. but I give you props for the only good tutorial.. still :/
HeroicHereticsHH3 2 months ago
wow, seriously...update this and please put that it deletes contacts and apps, dont wait till the person is halfway in the root. and say oh yea i forgot to tell u guys that it might delete apps and stuff. smh...but other than that thanks.
iDanLewis 2 months ago
zedomax waasssup have u checked that out! htcdev not sending unlock token?
rickyhollyhood 2 months ago
I'm sure theres other GSM version users out there who want this question answered also.
Does this method work on a GSM EVO 3D???
Software - 1.23.862.4
HBOOT - 1.49.0013
Thumbs up so everyone can see!:)
RLNPlehsHalo 2 months ago
@RLNPlehsHalo Sorry this one is for CDMA only. Try XDA for GSM.
zedomax 2 months ago
@zedomax so I have the newest update which is 2.08.651.3 update, does it work the same way? My phone is CDMA, I just wanted to be sure if there is a major difference if I used this video or not. Thanks
dodgemasterbryn 2 months ago
Its weird cuz ive done it many times ! And have gotten bootloader unlocked everytime. Ive even sent the token to my pjone and trying to copy and paste it and the same error so its not my pc what is it the ?
rickyhollyhood 2 months ago
Try it today and let me knpw if htcdev send u the correct unlock bin cuz ive followed ur tutorial.by the way ir the best at showing people the goods
rickyhollyhood 2 months ago
IM GETTING A " UNLOCKING BOOTLOADER FAILED" NO DESCRIPTION IT JUST SAYS THAT AFTER I ENTER THE TOKEN AND THERES NO ERROR IN THE TOKEN NO SPACES! I TRIED AN UNLOCKED EVO READ TOKEN AND GOT SAME MSG AFTER PASTING THE CODE AND SUBMITTING IT ... I KNOW BOUT THE SPACES ETC THIS IS SOMETHING DIFF
rickyhollyhood 2 months ago
@rickyhollyhood im having the same problem its very annoying not sure what to do
STLBoiFresh 2 months ago
ALSO I TRIED ON A EVO 3D I HAD ALREADY UNLOCKED PREVIOSLY READ THE TOKEN INSERTED ON THE HTC DEV AND GOT THE SAME ERROR IT MAY BE THE HTC DEV SITE???
rickyhollyhood 2 months ago
i can't seem to get the identifier token correctly it says unlocking bootloader failed but why there's no descriptions to it
rickyhollyhood 2 months ago
@rickyhollyhood Try doing it right after you get token.
zedomax 2 months ago
it wont let me copy the bin folder into the zip file
dylanboomer 2 months ago
What up Z .... JUST WANTED TO POINT OUT I DID TWO EVO 3D A FEW DAYS AGO AND THE HTC DEV DID SENT ME THE UNLOCK BIN I GOT THE BOOTLOADER OFF EVERYTIME! TODAY I GOT NO LUCK WITH TWO DIFFEVO 3D BOTH HD SAME HBOOT AND I DID GOT THE IDENTIFIER CODES BUT WEN I PASTE HEM CORRECTLY WITHOUT SPACES LIKE I'VE DONDE SCCESSFULLY IN THE PAST I GOT THAT UNLOCK BOOTLODER FAILED AND I TRIED MANY TIMES AND EACH TIME I WOUL GET A DIFF TOKEN. ANDEACH TIME I WOULD GET TE ERROR! PLEASE CHECK site AND REPLY IT
rickyhollyhood 2 months ago
I'm currently using a mac to root my eve 3d. I made it to step 21 or 22. Every time I try to install the "su-2.3.6.3-efgh-signed.zip" in the clockwork, it keeps saying it can't open it (bad) and installation aborted. Ive tried unzipping the file but it just ends up turning it into a folder that removes the ".zip" and when I try to install that new file that suppose to be unzipped in the clockwork, it brings me to two options; meta-inf/ and system. In other words, it won't directly install.
BrianZDC 2 months ago 2
@BrianZDC don't unzip the file, your mac could be unzipping them automatically, just flash the file.
zedomax 2 months ago
CAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAANNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN YOU PLEASE DO A MAC TUTORIAL TO ROOT THE EVO 3D...
rebourn2687 2 months ago
at the end i get installation aborted . how do i fix that
tareq5637343 2 months ago
question!!!.. if i use htc's method to root does that mean i can update my evo when htc sends out updates?
TheTechTaylor 2 months ago
id suggest not rooting guys. atleast dont install a different kernel.Iit bricks ur 3d
xXminGamoXx 2 months ago
I understand that I have to root the EVO 3D in order to be able to install a custom ROM, but all I want is to be able to run the STOCK Google/Android ROM/software on it because I hate HTC Sense. Is this possible?
Thanks.
Atheismrulez 2 months ago
@Atheismrulez thats just the launcher....you can download different launchers from the market...
wyattdropsbombs 2 months ago
Plz shoot some help this way.good video n it worked for my phone.tried to do wife phone,its same as mine,EVO 3d,but for some reason with her phone I never get the promt on the phone that says ' unlock bootloader' that gives me to choice to pick yes or no.plz help.did everything right in but still won't work.why is that????
newmoneyentkashin 2 months ago
help! at 6:41 i get this but then i don't get the screen you get at 6:57. what am i doing wrong?
C:\rootevo3dnew>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.153s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.009s]
finished. total time: 0.163s
C:\rootevo3dnew>
skatervolcom124 2 months ago
@skatervolcom124 I have the same problem as you've been able to solve it???
004thebest 2 months ago
When i went to the hboot screen as you did at 9:30 It says
Unlocked
Shooter XC Ship S-ON RL
But below under HBOOT its says
Main Version is older!
Update Fail!
QUEENSBADDEST 2 months ago
This has been flagged as spam show
CAN SOME JUST THIS ISH ON A MAC PLEASE (MAC)
MPG5557 2 months ago
everything was working until HTCDEV.COM is down...BS error when you type it in...
xXminGamoXx 2 months ago
This has been flagged as spam show
so i downloaded the rootevo3dnew. its in my downloads and in the c drive, i clicked on the c and pasted it there as well. i open the cmd and try and type both places but all it ever says is (c:\Users\user>c:\rootevo3dnew is not recognized as an internal or external command, operable program or batch file) i have tried everything idk what im doing wrong can u please help me i really want to root my phone! my email is envihb@gmail.com if u could further dummie this for me lol
envihb 2 months ago
ive done everything correctly up until i type "fastboot flash unlocktoken Unlock_code.bin" it responds saying error: cannot load 'Unlock_code.bin' idk what to do!! lol fk
omarthefig06 2 months ago
when i try to flash the cwm recovery image it won't let me. ive tried to flash like 3 other versions of the image but it still won't let me. the phone is unlocked i just can't get this to work. any idea what's wrong with it?
Oryanisi 2 months ago
Love the video man. Quick Question:There is no way to "unroot" after using this method because of the permanent watermark saying that the phone has been unlocked right?
jtcdude 3 months ago
if i had it rooted already and i relocked it can i root it again cause it keeps saying error on fastboot flash unlocktoken unlock_code.bin
TheHoot7 3 months ago
Oh ok!!! for those of you trying to download file...you must open link with internet explore...chrome seems to have problems with the link..
dominicano4u16 3 months ago
What link do i have to click in the download site to get the download to start
I dont see anywhere the link to download
dominicano4u16 3 months ago
download link does not work!!!
dominicano4u16 3 months ago
thanks you! i got stuck on step 18, installing revolutionary and making it my recovery mod, however i looked up another video to show me how to install a different recovery mod and it worked wonders! its teamwin recovery. it does everything automatically without having to insert commands (for those of you, like myself, that hate them) and now i have my fully rooted evo3d! :D time to install some ROMs
danielinho2010 3 months ago
i am not getting the Revolutionary CWM blue menus but i have done done it on the cmd and it said it has finished but i am not getting the Revolutionary CWM blue menus can u please help me with that :S
Jagdrgs 3 months ago
My phones updated and rooted, but when I run Open Garden's version of wifi tether I keep getting error messages when it tries to activate the wifi interface....can anyone help?
chiheil 3 months ago
how long dose it take to get the email confirmation from HTCDEV after registering... I have been waiting 2 hours!
APlekan187 3 months ago
Iam stuck on step18 on root EVO 3d later version. Step 18. Type the following to install ClockworkMod Recovery: fastboot flash recovery cwm-4.0.1.4-shooter.img After I put this in the cmd line it will prompt sending recovery and it was stuck there it never said finished. Can any help me get pass this to finish rooting.
deputybanks 3 months ago
@deputybanks Having the same problem. It's hanging at this command.
ToddRYoungblood 3 months ago
hi , i have an htc evo 3d with hboot 1.49.0012 , and i cant root it please help .
Mr2oussa 3 months ago
kind of weird i installed the rom but its stuck on the logo i installed miui
Win7Tutorials2012 3 months ago
(bootloader) [ERR] Command error !!!
OKAY [ 0.009s]
finished. total time: 0.010s
help me please
Win7Tutorials2012 3 months ago
One more thing, I tried the perma temp but when the script finished running I got a message saying operation not permitted. Do have a fix for this? I am running the latest version hb 1.5.
thondros 3 months ago
Hi Max I just watched ur video for rooting EVO 3d and want to do it but has a question about the code u need from HTC. I read somewhere that HTC reports the unlocking to the carrier. Do u know if there is any truth to this? Thanks!
thondros 3 months ago
Can you do a guide for Mac pretty please??