Well I have a very specific question. I let the regular maintainance go a bit too long, I'm a truck driver and my p3at sat too long. It was clean but managed to rust slightly on the slide. Can I clean it and duracoat the slide or do you have any other suggestions. Or a video you could refer me to?
I got the extended 9 roun hag now it fite my hand much better. eats every make and type ammo I feed it. Mag safe +P kicks a bit fired 12 boxes thru it in about 3 months. at 30 feet with Blazer cheap ammo it will keep all 10 in an area I can cover with 1 hand. What more can you ask for from a 250.00 gun that is this small.
I got the P3AT for about $500, BUT, I got it in special eddition. This little pistol came with a crimson trace laser attached belt clip and monogramed slide. Not too bad of a gun. I agree its not something your going to shot all the time. Its a little light for my taste and all but it IS really great for simple ccw carry...
@Thedawg4life I have a P3AT. I suggest it much more if your a normal sized guy. You have better stopping power and you want to get as much as you can get for a pistol of this size. I can handle the recoil just fine even though it has a very short barrel and very light. They are the exact same pistols just different calibers.
Hey nutNfancy i recently aquired the Kel-Tec P3AT and was wondering if i could get a feed back from you on the Ammo used on the firearm.... some Dont expand some do, let me know =] yours truely a NutNfancy fan
@Dro77080 I've heard pretty good feedback from CorBon's DPX all-copper bullets. I'm using them on my SigP229 along with Hornady's Critical Defense (I would prefer the DPX's to be honest). Break the gun in with FMJs then go and buy a box (perhaps 2.. they're expensive though) of the CorBons and shoot a mag or two just to see if the P-3AT cycles them properly. I've also heard positive reviews on Remington's Golden Saber. BTW, I'm saving up to buy this gun, can't wait (I'ts 500$ here in costa rica)
A little file work on the mag release will stop the accidental release as will correct thumb positioning on the weapon. Adding a Bersa floor plate to the magazine greatly enhances the control of the weapon as well. Doing a Fluff and Buff on the P3AT is well worth it. See goldenloki for more info on DIY. I have a 1000 rounds through mine to date. Mostly generic FMJ or reloads with cast bullets. Still running fine. I carry 90 grain Hydroshocks.
@airdude12345 Your finger is the safety. "What's stopping the gun from going off if you pull the trigger"? Well, you're pulling the trigger, it should go off. The only safety you really need is your common sense and your index finger.
Good vid. I have a P3at. I have no trouble accidently hitting the mag release because I'm left handed. The mag release button fits neatly between my trigger & middle finger. (finally being lefty is a good thing LOL). For carry ammo & reliability, I use Speer Gold dots. Very smooth shape for good feeding. Anyone having FTE, check the allen screw on slide (rear on side). It holds a flat spring that holds the extractor. it can loosen about 3/4 turn ( It won't be obvious) Use Loctite
with the now common factor of the "freaks/crazies" using full size pistols and hi capacity rifles, wouldn't it be better for an EDC to go more full size. That was my thinking when buying my last weapon. I changed my mode of carry of a larger weapons, but full proof for not forgetting due to weight. just want your thoughts on it.
with the now common factor of the "freaks" using full size pistols and hi capacity rifles, wouldn't it be better for an EDC to go more full size. That was my thinking when buying my last weapon. I changed my mode of carry of a larger weapons, but full proof for not forgetting due to weight. just want your thoughts on it.
I have been carrying this little Keltec for over a year. Its very comfortable to carry and it virtually goes everywhere with me. Have put about 1000 rounds thru mine and after the breakin period the only trouble I have had was with the ammunition. Believe it or not I have had hardball ammo that the bullet have fallen out of in my pocket. Gun is very reliable and I feel confident carrying it. As for the sites, 20 yds. daytime. Use crimson trace laser for nite accuracy.
276.00 IN A GOOD PAWN SHOP IN WINSTON SALEM NORTH CAROLINA. VERY HANDY WEAPON. I USE IT AS A BACK UP TO A KEL-TEC 9MM. I THOROUGHLY LOVE THESE WEAPONS. DOUBLE ACTION TRIGGER IS A LITTLE HARD TO GET USE TO BUT AFTER YOU PUT A FEW ROUNDS THROUGH IT IT IS EASY TO STAY ON TASK.
remember what pistols are meant for sights to me are not needed for close range if you know your gun you will make the shot and my thoughts are if the attacker is far enough away to use sights then they may be far away to bring a murder charge just my point of view
The only thing I dislike about this gun is that Kel Tec has still not added a last round lock back feature on the slide. I mean why not? Seriously Ruger, IO, and Taurus all hoped on this while Kel Tec still hasnt . C'mon Kel Tec get on the ball here!
@Peidmonte89 Though a slide release is handy for quick reloading, it adds snag to the gun. The purpose is so it wont catch on clothing nearly as easily. Keep in mind this is made for maximum concealability, and for backup, the gun needs to be as smooth as possible. It isn't uncommon to find a pistol of this type without a slide release for these reasons.
@Peidmonte89 my dad has a ruger lcp and that has a slide lock but its manualand not a last round. HOWEVER, just think if you're defending yourself and you run out and the bad guy doesn't know u ran out because the slide isn't locked back then u have an edge. honestly if someone shot 6+1 rounds at me and i didn't know that they ran out, i'd either run or keep running away
'slide lock to keep the weight down good trade (I think) to be the only pistol of the size that can (per builder) use +P ammo. I love my rugers and wanted a LCP but ruger says no to +P ammo as with the rest even S&W but Kel Tec says not to use them all the time. I carry this or my P-90 so when it's the 380 I want the +P (more bang for my buck)
'slide lock to keep the weight down good trade (I think) to be the only pistol of the size that can (per builder) use +P ammo. I love my rugers and wanted a LCP but ruger says no to +P ammo as with the rest even S&W but Kel Tec says not to use them all the time. I carry this or my P-90 so when it's the 380 I want the +P (more bang for my buck) also midway has a 9 round mag for it
@Thrashaero As far as I know it has slide lock back for a hold open of the slide, but doesn't lock back after last round is fired. (I don't own one, but this is what my research has shown me so far.) I'm still trying to decide what to buy for my warm weather pocket CCW
@demoncleaner80 yeah I found that out and said no compared to the taurus tcp which does have a last round slide catch as well as loaded chamber indicator and 2 mags. You can also lock it with a key. Its as cheap as the p3at right now too. But im thinking to get a keltec p11 since its 9mm luger and 10 ends and not a whole lot bigger at the same price
@Thrashaero I just traded my J-frame in for an LCP yesterday. The thing that kept me from getting a Taurus? (Because I REALLY liked the feel of it) -- if you watch some shooters shooting it on YouTube, it ejects the brass weird. I see people getting hit in the forehead by brass half the time. Not that big of a deal maybe, but kind of annoying in my opinion.
Also lack of a track record. It's a relatively new firearm, whereas the LCP has a pretty long track record of reliability.
@demoncleaner80 i have heard about the odd ejecting, but other than that, for my money, getting an extra mag, being the same cost as a p3at, and far less than an LCP (as well as the LCP had a recall at one point, as well as being a ripoff of the p3at), i find it's slide catch and loaded indicator to be good, rare features to have in such a small gun.
@Thrashaero The gunsmith at the local shop here said: "Well, I can tell you what law enforcement buys here all the time too: The LCP or the P3AT, I've never sold a single TCP to one" -- that might not hold weight with some people, but for me it did, knowing that officers in the field trust the LCP as a reliable backup if their life is on the line.
@demoncleaner80 besides the dealer prolly giving a pitch in his interest that might be bs, what officers think tends to be the groupthink of get the most popular or otherwise they get some sort of deal on a certain model. if you really want a realiable backup, taurus (just by coincidence being the same brand as the tcp) has a .380 cal revolver. I'm former military and know quite well that what they think is shit hot surely isn't always the best. its who has the best superficial incentive.
@Thrashaero Either way, I've taken the LCP out shooting twice now, and absolutely love it. Works great, easy to shoot... just very happy I made the decision to get it :)
@Peidmonte89 hey bro how is your Kel Tec .32 holding up? Im turning 21 next month and Im thinking about getting Kel tec as a first pistol, because i need something small and concealable for work
@andrewvanrhoberts Still in the shop waiting on it to be returned from repairs. I will post a video once its fixed. Its been 4 weeks and they still say "It should be shipping any day now" I am getting tired of it. Charter Arms had my gun back to me in 8 days flat from the day they received it! Wish everyone was that good with repairs.
I picked up a .380 3AT a week ago. It is used , black, & was a great price. The size & weight make me want to carry it more & more. Great videos helps make what I feel are better decisions. Thanks from NY.
The magazine release seems to be the weak spot in this design. I have witnessed in both the Ruger and Keltec inavertantly releasing the mag in their pocket or in use. I experienced this with the P32. It disqualifies it IMHO as a carry option for me...
just wanted to say this gun ROCKS!! 150 rounds and still no hickups. got mine for 280 and now no matter what i wear there is no excuse not to have a gun on me. Thanks for the awsome review keep up the good work.
Just wondering if you had experience with the Sig 232. Saw this review on the keltec .380 and totally agree with this gun. I head tons of positives on the 232 and I figure if anyone would have some insight you would. keep up the good work!
@44terryberry You can go to you keltecweapons com and order diffrent color grips. I just got the black one and I think it looks much better then my gray one. Easy to change over also.
For the money they are great pocket pistols. My wife and I both have one we carry as an option to everyday carry depending on what we are wearing. We have had zero trouble after hundreds of rounds. Good video
I went to Cabela's to buy a Kel-Tec and I was dissapointed when I looked at the handgun. The barrel was real dirty and the fit and finsih was horrible. I did not buy the gun because of the quality looked terrible. Is this normal? Anyone else have this problem? I tried a few kel-tecs just to make sure it wasen't just that gun and they all have terrible fit and finish.
@shadeclark The Kel Tec isnt made to be framed on a wall. It does have molding lines and that can be taken care of in just a few mins with a pocket knife. It does a job frills free. If you want a pretty gun then buy a new SIG 238 for over twice what the Kel Tec cost and does the exact same job.
@shadeclark you should look at the Ruger LCP 380. Both are very reliable and use by alot of police as a secondary weapon. I got the p3at and my wife got the LCP(around $30 more then the p3at), one is not better then the other but the LCP is a lot sharper looking. The 380 is a very good concealed carry gun for people with a cwp.
it has been 2 years. What is the verdict on the gun? They make them blued and in od green now I believe. I have a Walther PPKS. Nice gun but was damn near 3 times what you can buy this one for. Looking for something slim and to share with my lady now.
@xmanhockey7 He does not do undercover work anymore. He is mostly retired and just on the reserves now. I'm not even sure if he carries a gun when he is off duty, which is most of the time now. I've asked him about the death threats he gets and he just shrugs it off and says he's not worried about those idiots.
@jboritzki Well a reserve that works at our local jail (my step dads co-worker) had a regular to the jail go at him with a knife at a grocery store bottle return when he was with his two young kids. Fortunately the guy did not charge them and the officer was able to convince the guy to stop and leave. However, the officer no longer goes unarmed.
@xmanhockey7 I'd be armed if I was him. If I was doing the type of undercover work he was doing I would not have been armed. According to him, being armed would get you killed or at very least make the bad guys not feel comfortable around you and not talk to you anymore. They did sometimes check him for weapons and recording devices.
the only problems i have with my kel tec 380 is the grip is small for this weapon about a 2 finger grip also the clip button on the side when u carry it on ur right hip for right handed person sometimes u can push the button by accidant and the clip falls out
@rebelron2009 Good gun for a coat pocket or get the undershirts that have the holsters. Are you talking about wearing this gun inside the pants on the hip or outside?
@woodlandcammo27 no the one i have came with a holster for the outside right hip and if u bump it against somthing it pops the clip out and i wouldn't consider carrying one in the chamber for there is no saftey i find myself constantly checking the clip is in all the way
yes it was made for police officers as a backup, but seeing what i saw from it, with having the weapon for about 3 months or so(no more than 5), THIS IS NOT THE WEAPON THAT SHOULD BE CARRIED AS A BACKUP!
there was a very sharp piece of metal that had broken off from the housing, just a hair bit smaller than a toothpick! was not happy about that at all! yes it is a very light, concealable weapon, BUT... IF YOU DON'T HAVE A STAINLESS STEEL SLIDE, IT WILL BEGIN TO RUST ON YOU! and i wanted this weapon so bad when i saw it! but when i finally bought it, it was a very big let down!
first of all nutnfancy, i just want to say i enjoy your reviews and gear testing! please keep up the good work! with my time with a kel-tec p3at was not all a pleasure! now, out of the box brand new, i took it to the range and my first shot from 10yds was center mass. i liked that! shot the gun alittle more in the coming weeks and have a very serious issue besides the jamming! when the takedown pin was removed, and the housing was removed,
i've been watching nutn's vids for a couple years now. love every single one. why? they're as informative as can be. when i watch a review of a firearm or any other cool thing, i want to know everything about it, inside and out. Nutn has done that many times over, and then some! i've always found myself watching these other vids like a minute or two, and ask "that's it?"...keep doing what you do, nutnfancy!!
btw, if you haven't, could you do a video or 5 on the Sig p556? HUGE fan of sig, here!
man this gun pist me off.. every time i went to fire i kept hitting the clip relase.... i would never keep this gun as a back up gun,,,,, i found the walther ppk-s .380 was a better gun all around
man this gun realy pissed me off... every time i went to fire i kept hitting the clip release... not a gun you want for home protection or carry.......i found the walther ppk-s .380 was a much better gun...
After 200 rounds the slide stop broke on my Kel Tec P11. With a 60 second phone call Kel Tec shipped me a new slide stop at zero cost to me. Since then I have had no problems.
After 200 rounds the slide stop broke on my Kel Tec P11. After a 60 second phone call Kel Tec shipped me a new slide stop at zero cost to me. Since then I have had no problems.
As far as the sights,I thought this is a good design considering you may have it stuffed in a pocket and don't wan't any snags pulling it out.The Ruger LCP's sights Identical .
I have put about a 1000 rounds through mine. I will say the extractor screw tends to get lose. Other than that it has always eaten what I have feed it.
I have more than 1k rds(I stopped counting after 1k) through my 1st Gen P3AT. After performing the feed ramp mod I've had no trouble with HP rounds. I have several pistols including a KT P-11, but I keep the P3AT with me due to its size and weight. One thing to mention for your "Firepower" talking point is that there are +1 base plates available for around 12 USD as well as a 9 round factory mag with a contoured spacer. At the time this video was filmed, promag had 10 and 15rd(range) mags avail
I know a former police officer (now a detective) who carries a S&W 669 (.45) and a Kel-Tec P32 as a back up, when he's off-duty, he ALWAYS pockets his P32 for defense.
I love this little gun. Im from London so I really dont like big heavy guns(once had a ww1 colt that I had real trouble pulling the trigger on stiff as a bitch) but I like the idea of a small ,light tiny recoil easyly to hide pocet gun like this. If anyone has one for sale leave me a message and I will have the cash to you quick smart.
I have used Corbon defense rounds as well as the white box winchesters and have had no FTF or FTE. Five hundred rounds through it so far. I don't shoot it every time I hit the range. As for the sights, I repainted the stock sights neon green. For me, it's much better than the white paint. The Kel-Tec IS the perfect pocket pistol!
Here in Indianapolis, IN, the police chief decided that these Keltec P3AT pistols were not reliable enough. There is a flood of good used P3AT's here because the cops were forced to trade them in on other things, like the Ruger LCP.
This is a good pistol for the price and the purpose. Personally I carry one in a wallet style holster in my back pocket. It's fits perfectly and it's light weight makes it almost unnoticeable. I primarily purchased it as a concealed carry piece for riding a motorcycle in the summer. When it's to hot to wear anything more then a tee-shirt a larger pistol just isn't concealable. And he is dead on regarding the lengthy trigger pull and the mag release.
b4 real primary gun are u kidding me an f-ing 380 cal please now days you have so many people high on meth lsd or crack I want 1 shot stopping power 40cal or better
Sights. Functioning sight. Protrude. They stick out. This pistol is designed to eliminate this protrusion. Want better sights? Buy a pistol that is not designed for the pocket. Simple enough?
lol this jhonney kids retarted .... nutnfancys reviewing a gun, for me this is how i learn about more exotic guns i would otherwise never buy.... i will not decide i like a gun off a 5 minute review i think nutnfancys videos are the perfect length and i will watch nutnfancy until he stops making videos.... (p.s i dont love his comparison videos cause sometimes hell throw unrelated guns in their but i think that just for gun porn anyways)
I found this review while attempting to find one for the Freedom CA P-380. Being a sub $200 mini pistol, averaging around $130-$150 depending where you look. I was curious if you've ever done a review of this particular pistol?
I haven't been able to find a review of it anywhere, but it appears to be pretty much everywhere.
Person repeats himself too much and is hesitant about what he says. Person should have all facts before taping and have a written script that he has memorized or that he can read off camera. Best of luck for the future.
Just wanted to say the lcp has an optional plus one baseplate on impacts website for $12. I know how nutn likes his options. Don't know how good it is thou.
nice review. Kel-Tec is making a folding knife / bayonet. Could you by any chance get your hands on one for a review? I like the blade shape but I really want to see / use one before I dedicate the money. Thanks for the information.
I just bought one for a back up and pocket gun. It is good. Stuff you have to know, push the mag in hard and firmy then your set. It packs some punch for a tiny gun The round has some nuts to it. Like it a lot and I do carry it shorts or anything
@jonnychaos313 Jonny, he's got people telling him go to both ways..long and short. In the end, he makes the length according to what feels right to HIM. Its the only way he can stay true to himself. You cannot run your channel according to the critics, otherwise, you'd go bonkers. -- Veri (Nutn's sister)
@nutnfancy nutn u are the shit and idc if u have a vid that is 8hrs or 8sec long imma watch it dont worry bout all the bitching and griping there is a reason this video has over 200k views. just do you man thats what we love about this project not just the great reviews, but you as a person makes TNP!!!
@jonnychaos313 he trys to get all the questions anyone could think to ask... i love his videos and his info he brings to the table... so take your ADD and stop the negativity!!!!!
@jonnychaos313 give him a break, he does a good job, and He is one of the 2 best gun reviewers on youtube. I love his in depth reviews myself. H may go off the topic for a sec but have patients. A little personality makes a review much more refreshing. People that have no personality in the reviews put me to sleep. They may as well be robots!
@nutnfancy I LIKE the longer reviews, so I hope they aren't shortened. It's very easy to find short, impersonal reviews out there, which is one of the reasons why Nutn's are special. Hell, half the entertainment is hearing Nutn meander a bit as he speaks, so, please, don't shorten the videos. If a change has to be made, perhaps annotations (or something similar, don't know if possible tech-wise) could be used to jump the impatient to the appropriate Talking Point? Anyway, keep up the GREAT work!
@nutnfancy who dosent have ADD these days. i do i love your long videos. i hate videos that just talk about the guns and dont offer any kind of advice or POU. thanks for your time and thanks for the great videos.
@jonnychaos313 because thousands and thousands of people like the way he does things but hey hes more than willing to change it just for one person whos an asshole about it
I carry mine almost every day, with the optional frame mounted clip. Great CCW gun, in every way. I highly recommend the P3AT. It is the best combination of: price, size, weight, power and capacity.
Folks, a .380 ACP is a very capable round. Yeah, it's not a .45 ACP +P, but it is very effective at close ranges. And like Nutnfancy says, you'd be better off carrying a .380 all the time, rather than being weighted down by a big .45 and not carrying it.
@micthewrencher There both good, The Ruger has a slightly better finished look and also a slide lock which the Kel Tec lacks, but both are reliable. I would personally choose a Kel Tec over a Ruger based on price. Also I have seen videos and read on forums that the Ruger can come out of battery if draw from a tight holster.
anyone else hear a little fart at 3:30 haha
JoeySk84life 6 days ago
Is that a baby in the backround at 5:00?
armedtetrapod 2 weeks ago
I'm always realy happy when i can Google video search a gun and TNP comes up :)
Peter556NATO 1 month ago
Well I have a very specific question. I let the regular maintainance go a bit too long, I'm a truck driver and my p3at sat too long. It was clean but managed to rust slightly on the slide. Can I clean it and duracoat the slide or do you have any other suggestions. Or a video you could refer me to?
Dredbearded 3 months ago
thnx for introducing me to my kel tec...just bot it...do not know a thing about it till now...
robinpayne 4 months ago
Over all i didn't really like the p3at. It jams on me every time. even if i cycle it. Im sticking to my XDM as CCW of choice..
Hainguyen87 4 months ago
I got the extended 9 roun hag now it fite my hand much better. eats every make and type ammo I feed it. Mag safe +P kicks a bit fired 12 boxes thru it in about 3 months. at 30 feet with Blazer cheap ammo it will keep all 10 in an area I can cover with 1 hand. What more can you ask for from a 250.00 gun that is this small.
medicrod1 4 months ago
I got the P3AT for about $500, BUT, I got it in special eddition. This little pistol came with a crimson trace laser attached belt clip and monogramed slide. Not too bad of a gun. I agree its not something your going to shot all the time. Its a little light for my taste and all but it IS really great for simple ccw carry...
ccwattitude 4 months ago
The Kel-Tec pistol does it right.
SuperRip7 4 months ago
I just bought one for my wife. And I think I wil get one too.
MrAppleseed88 5 months ago
What do you recommend: Kel Tec p32 or Kel Tec p3AT for everyday carry?
Thedawg4life 6 months ago
@Thedawg4life I have a P3AT. I suggest it much more if your a normal sized guy. You have better stopping power and you want to get as much as you can get for a pistol of this size. I can handle the recoil just fine even though it has a very short barrel and very light. They are the exact same pistols just different calibers.
reaperflynn3 5 months ago
Hey nutNfancy i recently aquired the Kel-Tec P3AT and was wondering if i could get a feed back from you on the Ammo used on the firearm.... some Dont expand some do, let me know =] yours truely a NutNfancy fan
Dro77080 7 months ago
@Dro77080 I've heard pretty good feedback from CorBon's DPX all-copper bullets. I'm using them on my SigP229 along with Hornady's Critical Defense (I would prefer the DPX's to be honest). Break the gun in with FMJs then go and buy a box (perhaps 2.. they're expensive though) of the CorBons and shoot a mag or two just to see if the P-3AT cycles them properly. I've also heard positive reviews on Remington's Golden Saber. BTW, I'm saving up to buy this gun, can't wait (I'ts 500$ here in costa rica)
amomimous 7 months ago
A little file work on the mag release will stop the accidental release as will correct thumb positioning on the weapon. Adding a Bersa floor plate to the magazine greatly enhances the control of the weapon as well. Doing a Fluff and Buff on the P3AT is well worth it. See goldenloki for more info on DIY. I have a 1000 rounds through mine to date. Mostly generic FMJ or reloads with cast bullets. Still running fine. I carry 90 grain Hydroshocks.
specops65 7 months ago
@specops65 been see'ing alot of Vid's showing it's a failure to expand infact Cor-Bon's DPX ammo seamed to me expanded 100% of the time......
Dro77080 7 months ago
I would really like to know your thought on the Kel-Tec P32.
noslen1968 7 months ago
Does it have a safety? You know what's stopping the gun going off if you pull the trigger? Thx
airdude12345 8 months ago
@airdude12345 Your finger is the safety. "What's stopping the gun from going off if you pull the trigger"? Well, you're pulling the trigger, it should go off. The only safety you really need is your common sense and your index finger.
SecretService80 8 months ago
great
luckybear0301 8 months ago
Good vid. I have a P3at. I have no trouble accidently hitting the mag release because I'm left handed. The mag release button fits neatly between my trigger & middle finger. (finally being lefty is a good thing LOL). For carry ammo & reliability, I use Speer Gold dots. Very smooth shape for good feeding. Anyone having FTE, check the allen screw on slide (rear on side). It holds a flat spring that holds the extractor. it can loosen about 3/4 turn ( It won't be obvious) Use Loctite
cruiserx55 8 months ago
This has been flagged as spam show
with the now common factor of the "freaks/crazies" using full size pistols and hi capacity rifles, wouldn't it be better for an EDC to go more full size. That was my thinking when buying my last weapon. I changed my mode of carry of a larger weapons, but full proof for not forgetting due to weight. just want your thoughts on it.
campcomp00 9 months ago
with the now common factor of the "freaks" using full size pistols and hi capacity rifles, wouldn't it be better for an EDC to go more full size. That was my thinking when buying my last weapon. I changed my mode of carry of a larger weapons, but full proof for not forgetting due to weight. just want your thoughts on it.
campcomp00 9 months ago
I have been carrying this little Keltec for over a year. Its very comfortable to carry and it virtually goes everywhere with me. Have put about 1000 rounds thru mine and after the breakin period the only trouble I have had was with the ammunition. Believe it or not I have had hardball ammo that the bullet have fallen out of in my pocket. Gun is very reliable and I feel confident carrying it. As for the sites, 20 yds. daytime. Use crimson trace laser for nite accuracy.
brianminkc 9 months ago
My husband loves your videos . Please , do something for the wives !! De-Pussify us !
TheDJ404 9 months ago
nice sissy gun for the likes of you
BloodNorseGods 9 months ago
276.00 IN A GOOD PAWN SHOP IN WINSTON SALEM NORTH CAROLINA. VERY HANDY WEAPON. I USE IT AS A BACK UP TO A KEL-TEC 9MM. I THOROUGHLY LOVE THESE WEAPONS. DOUBLE ACTION TRIGGER IS A LITTLE HARD TO GET USE TO BUT AFTER YOU PUT A FEW ROUNDS THROUGH IT IT IS EASY TO STAY ON TASK.
comicfan74 9 months ago
Good gun just replaced my bodyguard 380 that kept breaking with this gun
Took to range blew off 100 rounds. PERFECT every time
garyp53161 9 months ago
kel tecs are junk, but for the money it wil still scare somebody
123666420 10 months ago
remember what pistols are meant for sights to me are not needed for close range if you know your gun you will make the shot and my thoughts are if the attacker is far enough away to use sights then they may be far away to bring a murder charge just my point of view
Chevydipper1500 10 months ago
The only thing I dislike about this gun is that Kel Tec has still not added a last round lock back feature on the slide. I mean why not? Seriously Ruger, IO, and Taurus all hoped on this while Kel Tec still hasnt . C'mon Kel Tec get on the ball here!
Peidmonte89 10 months ago 15
@Peidmonte89 Though a slide release is handy for quick reloading, it adds snag to the gun. The purpose is so it wont catch on clothing nearly as easily. Keep in mind this is made for maximum concealability, and for backup, the gun needs to be as smooth as possible. It isn't uncommon to find a pistol of this type without a slide release for these reasons.
reaperflynn3 8 months ago
@Peidmonte89 my dad has a ruger lcp and that has a slide lock but its manualand not a last round. HOWEVER, just think if you're defending yourself and you run out and the bad guy doesn't know u ran out because the slide isn't locked back then u have an edge. honestly if someone shot 6+1 rounds at me and i didn't know that they ran out, i'd either run or keep running away
skibum1610 6 months ago
@Peidmonte89 No
'slide lock to keep the weight down good trade (I think) to be the only pistol of the size that can (per builder) use +P ammo. I love my rugers and wanted a LCP but ruger says no to +P ammo as with the rest even S&W but Kel Tec says not to use them all the time. I carry this or my P-90 so when it's the 380 I want the +P (more bang for my buck)
medicrod1 5 months ago
@Peidmonte89 No
'slide lock to keep the weight down good trade (I think) to be the only pistol of the size that can (per builder) use +P ammo. I love my rugers and wanted a LCP but ruger says no to +P ammo as with the rest even S&W but Kel Tec says not to use them all the time. I carry this or my P-90 so when it's the 380 I want the +P (more bang for my buck) also midway has a 9 round mag for it
medicrod1 5 months ago
@Peidmonte89 Last round lock back should be standard. Period.
bull068 5 months ago
@Peidmonte89 the LCP has lock back?
Thrashaero 4 months ago
@Thrashaero yep
Peidmonte89 4 months ago
@Thrashaero As far as I know it has slide lock back for a hold open of the slide, but doesn't lock back after last round is fired. (I don't own one, but this is what my research has shown me so far.) I'm still trying to decide what to buy for my warm weather pocket CCW
demoncleaner80 3 months ago
@demoncleaner80 yeah I found that out and said no compared to the taurus tcp which does have a last round slide catch as well as loaded chamber indicator and 2 mags. You can also lock it with a key. Its as cheap as the p3at right now too. But im thinking to get a keltec p11 since its 9mm luger and 10 ends and not a whole lot bigger at the same price
Thrashaero 3 months ago
@demoncleaner80 check out mouseguns com for a comparison pdf of most every small semi
Thrashaero 3 months ago
@Thrashaero I just traded my J-frame in for an LCP yesterday. The thing that kept me from getting a Taurus? (Because I REALLY liked the feel of it) -- if you watch some shooters shooting it on YouTube, it ejects the brass weird. I see people getting hit in the forehead by brass half the time. Not that big of a deal maybe, but kind of annoying in my opinion.
Also lack of a track record. It's a relatively new firearm, whereas the LCP has a pretty long track record of reliability.
demoncleaner80 3 months ago
@demoncleaner80 i have heard about the odd ejecting, but other than that, for my money, getting an extra mag, being the same cost as a p3at, and far less than an LCP (as well as the LCP had a recall at one point, as well as being a ripoff of the p3at), i find it's slide catch and loaded indicator to be good, rare features to have in such a small gun.
Thrashaero 3 months ago
@Thrashaero The gunsmith at the local shop here said: "Well, I can tell you what law enforcement buys here all the time too: The LCP or the P3AT, I've never sold a single TCP to one" -- that might not hold weight with some people, but for me it did, knowing that officers in the field trust the LCP as a reliable backup if their life is on the line.
demoncleaner80 3 months ago
@demoncleaner80 besides the dealer prolly giving a pitch in his interest that might be bs, what officers think tends to be the groupthink of get the most popular or otherwise they get some sort of deal on a certain model. if you really want a realiable backup, taurus (just by coincidence being the same brand as the tcp) has a .380 cal revolver. I'm former military and know quite well that what they think is shit hot surely isn't always the best. its who has the best superficial incentive.
Thrashaero 3 months ago
@Thrashaero Either way, I've taken the LCP out shooting twice now, and absolutely love it. Works great, easy to shoot... just very happy I made the decision to get it :)
demoncleaner80 3 months ago
@Peidmonte89 hey bro how is your Kel Tec .32 holding up? Im turning 21 next month and Im thinking about getting Kel tec as a first pistol, because i need something small and concealable for work
andrewvanrhoberts 3 months ago
@andrewvanrhoberts Still in the shop waiting on it to be returned from repairs. I will post a video once its fixed. Its been 4 weeks and they still say "It should be shipping any day now" I am getting tired of it. Charter Arms had my gun back to me in 8 days flat from the day they received it! Wish everyone was that good with repairs.
Peidmonte89 3 months ago
@Peidmonte89 I own a p32 and mine locks back on the last round i'm not sure when mine was made i bought it used.
ConnorsDad24 1 month ago
@ConnorsDad24 yes the p32 does the p3at does not.
Peidmonte89 1 month ago
VERY informative, smart and entertaining review. Look forward to your other reviews, and keep up the good work!
cshq177 10 months ago
Comment removed
AprilGirl25 10 months ago
$250 at Belding & Mull in Philipsburg, PA.
$209 from CDNN Sports online.
AprilGirl25 10 months ago
$270 in central texas MrRipidapart
b3n000 10 months ago
how much does this firearm cost
MrRipidapart 10 months ago
nice
couchfighter 10 months ago
thank you sir. i just purchased mine today and can't wait to for range time tomorrow.
gr8gmblr 10 months ago
I picked up a .380 3AT a week ago. It is used , black, & was a great price. The size & weight make me want to carry it more & more. Great videos helps make what I feel are better decisions. Thanks from NY.
ttown32179 10 months ago
The magazine release seems to be the weak spot in this design. I have witnessed in both the Ruger and Keltec inavertantly releasing the mag in their pocket or in use. I experienced this with the P32. It disqualifies it IMHO as a carry option for me...
ressikanflute 10 months ago
just wanted to say this gun ROCKS!! 150 rounds and still no hickups. got mine for 280 and now no matter what i wear there is no excuse not to have a gun on me. Thanks for the awsome review keep up the good work.
MrGunsrfun88 11 months ago
Just wondering if you had experience with the Sig 232. Saw this review on the keltec .380 and totally agree with this gun. I head tons of positives on the 232 and I figure if anyone would have some insight you would. keep up the good work!
MrAstuflick 11 months ago
up to 1000 + rounds while traing kel tec p3at still running 100%
CombatTrucker1 1 year ago
Looks like its fresh from its $2 store plastic package
Valkyrie116 1 year ago
Thanks for the great vids nutn you rock man keep em coming..
pistoltoter88 1 year ago
wonder if a lefty will hit the mag release
spineadjuster13 1 year ago
my frame is grey...looks pretty bad.Yours looks great-did you paint the frame black?
44terryberry 1 year ago
@44terryberry You can go to you keltecweapons com and order diffrent color grips. I just got the black one and I think it looks much better then my gray one. Easy to change over also.
plbrent 11 months ago
@jonnychaos313 Give him a break he takes time off his sceduele to help us to learn about these guns and alot more.So hop off him he helps alot
daboss2013 1 year ago
@daboss2013 totally agree!
arecksONE 10 months ago
For the money they are great pocket pistols. My wife and I both have one we carry as an option to everyday carry depending on what we are wearing. We have had zero trouble after hundreds of rounds. Good video
thawkins426 1 year ago
I went to Cabela's to buy a Kel-Tec and I was dissapointed when I looked at the handgun. The barrel was real dirty and the fit and finsih was horrible. I did not buy the gun because of the quality looked terrible. Is this normal? Anyone else have this problem? I tried a few kel-tecs just to make sure it wasen't just that gun and they all have terrible fit and finish.
shadeclark 1 year ago
@shadeclark The Kel Tec isnt made to be framed on a wall. It does have molding lines and that can be taken care of in just a few mins with a pocket knife. It does a job frills free. If you want a pretty gun then buy a new SIG 238 for over twice what the Kel Tec cost and does the exact same job.
Stylensky 1 year ago
@shadeclark you should look at the Ruger LCP 380. Both are very reliable and use by alot of police as a secondary weapon. I got the p3at and my wife got the LCP(around $30 more then the p3at), one is not better then the other but the LCP is a lot sharper looking. The 380 is a very good concealed carry gun for people with a cwp.
plbrent 1 year ago
love your vids, you should be a standard for every one else that make a GUN vid to be judged by
barstoolguru 1 year ago
Nice job I like the piece myself
09rsm 1 year ago
The sights on the P3AT are lacking, but a crimson Trace laser solves the problem.
IndianaJesusfreak 1 year ago
it has been 2 years. What is the verdict on the gun? They make them blued and in od green now I believe. I have a Walther PPKS. Nice gun but was damn near 3 times what you can buy this one for. Looking for something slim and to share with my lady now.
woodlandcammo27 1 year ago
My father-in-law was an undercover narcotics detective. He carried something with even less power than this. He carried nothing usually.
jboritzki 1 year ago
@jboritzki He might want to seriously reconsider that.
xmanhockey7 1 year ago
@xmanhockey7 He does not do undercover work anymore. He is mostly retired and just on the reserves now. I'm not even sure if he carries a gun when he is off duty, which is most of the time now. I've asked him about the death threats he gets and he just shrugs it off and says he's not worried about those idiots.
jboritzki 1 year ago
@jboritzki Well a reserve that works at our local jail (my step dads co-worker) had a regular to the jail go at him with a knife at a grocery store bottle return when he was with his two young kids. Fortunately the guy did not charge them and the officer was able to convince the guy to stop and leave. However, the officer no longer goes unarmed.
xmanhockey7 1 year ago
@xmanhockey7 I'd be armed if I was him. If I was doing the type of undercover work he was doing I would not have been armed. According to him, being armed would get you killed or at very least make the bad guys not feel comfortable around you and not talk to you anymore. They did sometimes check him for weapons and recording devices.
jboritzki 1 year ago
how bout a DB 380. looks like a baby glock break down like a glock and has sights like a glock
DrGreenfun 1 year ago
Yap yap yap What Color shoes go best with gun, You missed that,but I dont see how?
wa2zvt 1 year ago
Please do a review of the Walther PPK!
SecretService80 1 year ago
Very informative. Thanks for taking the time to review this gun.
rattler316 1 year ago
the only problems i have with my kel tec 380 is the grip is small for this weapon about a 2 finger grip also the clip button on the side when u carry it on ur right hip for right handed person sometimes u can push the button by accidant and the clip falls out
rebelron2009 1 year ago
@rebelron2009 Good gun for a coat pocket or get the undershirts that have the holsters. Are you talking about wearing this gun inside the pants on the hip or outside?
woodlandcammo27 1 year ago
@woodlandcammo27 no the one i have came with a holster for the outside right hip and if u bump it against somthing it pops the clip out and i wouldn't consider carrying one in the chamber for there is no saftey i find myself constantly checking the clip is in all the way
rebelron2009 1 year ago
do you get a warranty when you buy this gun?
561sage 1 year ago
yes it was made for police officers as a backup, but seeing what i saw from it, with having the weapon for about 3 months or so(no more than 5), THIS IS NOT THE WEAPON THAT SHOULD BE CARRIED AS A BACKUP!
MrSo47 1 year ago
there was a very sharp piece of metal that had broken off from the housing, just a hair bit smaller than a toothpick! was not happy about that at all! yes it is a very light, concealable weapon, BUT... IF YOU DON'T HAVE A STAINLESS STEEL SLIDE, IT WILL BEGIN TO RUST ON YOU! and i wanted this weapon so bad when i saw it! but when i finally bought it, it was a very big let down!
MrSo47 1 year ago
first of all nutnfancy, i just want to say i enjoy your reviews and gear testing! please keep up the good work! with my time with a kel-tec p3at was not all a pleasure! now, out of the box brand new, i took it to the range and my first shot from 10yds was center mass. i liked that! shot the gun alittle more in the coming weeks and have a very serious issue besides the jamming! when the takedown pin was removed, and the housing was removed,
MrSo47 1 year ago
i've been watching nutn's vids for a couple years now. love every single one. why? they're as informative as can be. when i watch a review of a firearm or any other cool thing, i want to know everything about it, inside and out. Nutn has done that many times over, and then some! i've always found myself watching these other vids like a minute or two, and ask "that's it?"...keep doing what you do, nutnfancy!!
btw, if you haven't, could you do a video or 5 on the Sig p556? HUGE fan of sig, here!
1234ovvarc 1 year ago
man this gun pist me off.. every time i went to fire i kept hitting the clip relase.... i would never keep this gun as a back up gun,,,,, i found the walther ppk-s .380 was a better gun all around
460faust 1 year ago
This has been flagged as spam show
man this gun realy pissed me off... every time i went to fire i kept hitting the clip release... not a gun you want for home protection or carry.......i found the walther ppk-s .380 was a much better gun...
460faust 1 year ago
Comment removed
460faust 1 year ago
i wish the nut'n'fancy guy was the host of personal defense tv on the outdoor channel. the current host of that show sucks
jimmcfarland299 1 year ago
this guy is an asshat
NorVaSub05 1 year ago
nutn your the shit
goodnightChesty1775 1 year ago
After 200 rounds the slide stop broke on my Kel Tec P11. With a 60 second phone call Kel Tec shipped me a new slide stop at zero cost to me. Since then I have had no problems.
stellarspellar 1 year ago
After 200 rounds the slide stop broke on my Kel Tec P11. After a 60 second phone call Kel Tec shipped me a new slide stop at zero cost to me. Since then I have had no problems.
stellarspellar 1 year ago
Thank's Nutn. After seeing your review I finally broke down and picked up an OD Green version of the P3AT. Excellent little pocket shooter.
Joe11Blue 1 year ago
As far as the sights,I thought this is a good design considering you may have it stuffed in a pocket and don't wan't any snags pulling it out.The Ruger LCP's sights Identical .
demmylowther 1 year ago
I have put about a 1000 rounds through mine. I will say the extractor screw tends to get lose. Other than that it has always eaten what I have feed it.
uglyfight 1 year ago
AMERICA - FUCK YEAH
GUNS - FUCK YEAH
tinghaling 1 year ago
nutnfancy you are doing a great job!
GlockSlinger666 1 year ago
put a lanyard onnit and call it a neck gun!
chabochi1 1 year ago
I have more than 1k rds(I stopped counting after 1k) through my 1st Gen P3AT. After performing the feed ramp mod I've had no trouble with HP rounds. I have several pistols including a KT P-11, but I keep the P3AT with me due to its size and weight. One thing to mention for your "Firepower" talking point is that there are +1 base plates available for around 12 USD as well as a 9 round factory mag with a contoured spacer. At the time this video was filmed, promag had 10 and 15rd(range) mags avail
glsracer 1 year ago
Not everyone will dig you NF, but you are the best!, keep it up bro!!
And Thank You!
skunkwerksllc 1 year ago
I know a former police officer (now a detective) who carries a S&W 669 (.45) and a Kel-Tec P32 as a back up, when he's off-duty, he ALWAYS pockets his P32 for defense.
SecretService80 1 year ago
can you review the walther ppk
MrMaplesushi 1 year ago
can you review the walther ppk
MrMaplesushi 1 year ago
What about the Bersa 380 cc how would it compare to P3AT
quadheart 1 year ago
I carry the P32 everyday all day, but I think I'm going to upgrade to the .380 just for the upgrade in round size/power. Good review.
usdm420 1 year ago
I love this little gun. Im from London so I really dont like big heavy guns(once had a ww1 colt that I had real trouble pulling the trigger on stiff as a bitch) but I like the idea of a small ,light tiny recoil easyly to hide pocet gun like this. If anyone has one for sale leave me a message and I will have the cash to you quick smart.
patsyd80 1 year ago
@nutnfancy I don't see a review of the .380 Walther PPK. Did you make one? If so, could you please send it to me (via personal message)?
SecretService80 1 year ago
I have used Corbon defense rounds as well as the white box winchesters and have had no FTF or FTE. Five hundred rounds through it so far. I don't shoot it every time I hit the range. As for the sights, I repainted the stock sights neon green. For me, it's much better than the white paint. The Kel-Tec IS the perfect pocket pistol!
DangerousDude2010 1 year ago
380s jam alot?
PelonNorthernBeats 1 year ago
@PelonNorthernBeats you right i got 2 and they always jams jus like 9s
MrPothead221 1 year ago
Here in Indianapolis, IN, the police chief decided that these Keltec P3AT pistols were not reliable enough. There is a flood of good used P3AT's here because the cops were forced to trade them in on other things, like the Ruger LCP.
jboritzki 1 year ago
aaa
Mohsin17791 1 year ago
This is a good pistol for the price and the purpose. Personally I carry one in a wallet style holster in my back pocket. It's fits perfectly and it's light weight makes it almost unnoticeable. I primarily purchased it as a concealed carry piece for riding a motorcycle in the summer. When it's to hot to wear anything more then a tee-shirt a larger pistol just isn't concealable. And he is dead on regarding the lengthy trigger pull and the mag release.
njtaz1961 1 year ago
b4 real primary gun are u kidding me an f-ing 380 cal please now days you have so many people high on meth lsd or crack I want 1 shot stopping power 40cal or better
who919 1 year ago
@who919 A .40S&W is a great and powerful round but it isn't god. If someones high on drugs, I doubt just one .40S&W, or any round will do it.
chechnya 1 year ago
Thanks for the informative review :-)
razzle51172 1 year ago
Sights. Functioning sight. Protrude. They stick out. This pistol is designed to eliminate this protrusion. Want better sights? Buy a pistol that is not designed for the pocket. Simple enough?
pismopal 1 year ago 2
lol this jhonney kids retarted .... nutnfancys reviewing a gun, for me this is how i learn about more exotic guns i would otherwise never buy.... i will not decide i like a gun off a 5 minute review i think nutnfancys videos are the perfect length and i will watch nutnfancy until he stops making videos.... (p.s i dont love his comparison videos cause sometimes hell throw unrelated guns in their but i think that just for gun porn anyways)
MrLoveslittlekids 1 year ago
@MrLoveslittlekids I agree :-)
razzle51172 1 year ago
i use a glock 25 15 round mag plus another mag
nightshade288 1 year ago
I found this review while attempting to find one for the Freedom CA P-380. Being a sub $200 mini pistol, averaging around $130-$150 depending where you look. I was curious if you've ever done a review of this particular pistol?
I haven't been able to find a review of it anywhere, but it appears to be pretty much everywhere.
NeuroManson 1 year ago
how much does it cost
AirsoftStaffSGT1 1 year ago
Philosophy.
rajcso 1 year ago
me and my dad could only fire one round threw it maybe two if we're lucky
crazycrackergabe 1 year ago
@crazycrackergabe maybe you only lowdead 2 rounds in the gun maybe?
communicashun 1 year ago
@communicashun full clip half a clip and it jammed every shot or 2
we bought it new and we shot 300 rounds thruw it in 3 weeks to break it in
crazycrackergabe 1 year ago
why wouldn't they just put decent sights on it?
paper000000 1 year ago
it's not fair to drop words like 'extemporaneously' on us man. 99.9% of YT doesn't know what it means... even i had to look it up.
94dc2integ 1 year ago
im in oklahoma city and i cannot find this gun under 299.99. how much do yall pay and where do you live?
antwan17 1 year ago
@antwan17 It goes all the way up to about 400 dollars with a chrome finish in my area.
Tregen300 1 year ago
mAKES me think of my j-22
racingchamp101 1 year ago
LCP or P-3AT ?
excelerater 1 year ago
Person repeats himself too much and is hesitant about what he says. Person should have all facts before taping and have a written script that he has memorized or that he can read off camera. Best of luck for the future.
almagore1 1 year ago
Just wanted to say the lcp has an optional plus one baseplate on impacts website for $12. I know how nutn likes his options. Don't know how good it is thou.
sierra117bdfl 1 year ago
nutnfancy,
nice review. Kel-Tec is making a folding knife / bayonet. Could you by any chance get your hands on one for a review? I like the blade shape but I really want to see / use one before I dedicate the money. Thanks for the information.
foxcombatives 1 year ago
I just bought one for a back up and pocket gun. It is good. Stuff you have to know, push the mag in hard and firmy then your set. It packs some punch for a tiny gun The round has some nuts to it. Like it a lot and I do carry it shorts or anything
KipBurbank 1 year ago
Can you get the P - 3AT available with customizable trigger pulls? 3 - 4 pounds ?
jakmak52 1 year ago
hell the longer the review the more i like it ,i wanna know what im buying .good job nunfancy but does a dry fire hurt this weapon.
smutmouth4u 1 year ago
verry simillar to the ruger lcp
TheGunguy1 1 year ago
i dig the reviews. it is a great concealed carry peice. your reviews are informative and accurate and I appreiciate it. Thanks.
harmonykoruption 1 year ago
This pistol sits in my pocket every single time I go outside the house. Unbelievably good choice for a conceal carry pistol.
killchain187 1 year ago
This comment has received too many negative votes show
how come i can only make it through like one minute of your pistol reviews
holy shit get on with it already
jonnychaos313 1 year ago
@jonnychaos313 Maybe ADD. But anyway, we've put plans in place to change the format cause little jonny has the attention span of a gnat. -- Veri
nutnfancy 1 year ago 53
@nutnfancy its just the fact you go on and on and on about shit you really could stream line your material by like 5 minutes
jonnychaos313 1 year ago
@jonnychaos313 Jonny, he's got people telling him go to both ways..long and short. In the end, he makes the length according to what feels right to HIM. Its the only way he can stay true to himself. You cannot run your channel according to the critics, otherwise, you'd go bonkers. -- Veri (Nutn's sister)
nutnfancy 1 year ago 56
@nutnfancy Why not make a long version AND a 5 minute version.
burchified 1 year ago
@nutnfancy nutn u are the shit and idc if u have a vid that is 8hrs or 8sec long imma watch it dont worry bout all the bitching and griping there is a reason this video has over 200k views. just do you man thats what we love about this project not just the great reviews, but you as a person makes TNP!!!
BDBakaJR 1 year ago 2
@nutnfancy
plus thats why u skip around in his videos... instead of complaining. Cause you dont actually need to watch the ~10-11min video straight through
epyon158 1 year ago
@nutnfancy I do love the reviews, but I have to agree.... the reviews could be more concise... not demanding it, but suggesting it.
Xjr5rjX 1 year ago
@jonnychaos313 he trys to get all the questions anyone could think to ask... i love his videos and his info he brings to the table... so take your ADD and stop the negativity!!!!!
jewpope 1 year ago 10
@jonnychaos313 give him a break, he does a good job, and He is one of the 2 best gun reviewers on youtube. I love his in depth reviews myself. H may go off the topic for a sec but have patients. A little personality makes a review much more refreshing. People that have no personality in the reviews put me to sleep. They may as well be robots!
Peidmonte89 1 year ago
@jonnychaos313 I wish we could stream your life so it was only 5 minutes
Adam98671 1 year ago
@nutnfancy I LIKE the longer reviews, so I hope they aren't shortened. It's very easy to find short, impersonal reviews out there, which is one of the reasons why Nutn's are special. Hell, half the entertainment is hearing Nutn meander a bit as he speaks, so, please, don't shorten the videos. If a change has to be made, perhaps annotations (or something similar, don't know if possible tech-wise) could be used to jump the impatient to the appropriate Talking Point? Anyway, keep up the GREAT work!
AZRogue 1 year ago
@nutnfancy I have ADD, but I watch every TNP video I can find from the beginning to the end:)
keesurt 1 year ago
@nutnfancy who dosent have ADD these days. i do i love your long videos. i hate videos that just talk about the guns and dont offer any kind of advice or POU. thanks for your time and thanks for the great videos.
crazylucifer0 1 year ago 8
@jonnychaos313 because thousands and thousands of people like the way he does things but hey hes more than willing to change it just for one person whos an asshole about it
ericsyutubeaccount 1 year ago
Its amazing how such a small thing could kill some one
Comet12421 1 year ago
Quite possibly my favorite kel-tec ever. Forget 9mm, there's .380.
peepeevagi 1 year ago
Nice review. I'll definitely check out your other vids later.
MRCAB 1 year ago
This gun can go for $400 to $500 in Massachusetts because they are hard to find. MA laws suck.
badreligion91 1 year ago
I carry mine almost every day, with the optional frame mounted clip. Great CCW gun, in every way. I highly recommend the P3AT. It is the best combination of: price, size, weight, power and capacity.
Folks, a .380 ACP is a very capable round. Yeah, it's not a .45 ACP +P, but it is very effective at close ranges. And like Nutnfancy says, you'd be better off carrying a .380 all the time, rather than being weighted down by a big .45 and not carrying it.
Bottom line, the P3AT is the ideal CCW gun.
fishman017 1 year ago
great gun
eviltwin47 1 year ago
So what dose every body think p3AT vr' s Ruger lcp?
micthewrencher 1 year ago
@micthewrencher There both good, The Ruger has a slightly better finished look and also a slide lock which the Kel Tec lacks, but both are reliable. I would personally choose a Kel Tec over a Ruger based on price. Also I have seen videos and read on forums that the Ruger can come out of battery if draw from a tight holster.
richiestang78 1 year ago
This has been flagged as spam show
Cool gun... loved it. Just sick of this new fad.... Lighter is better.
LoganHankins 1 year ago
Comment removed
LoganHankins 1 year ago
I'm getting that gun in a week,So thanks for the VID!!
bama4720 1 year ago