@naptownlongboarding thats why youre watching a tutorial ? i viewed this about 8 months ago and even then i was sliding like hell i was trying to find a tut to teach me how to fs slide and i could already do this lol
@dodexodus You can do small speed checks with just kicking out the back wheels, and maybe 4 wheel standups, but it's very difficult and tiring. Better to do it on a hill.
Hi I have black 84 a zombies ly dropcarve and bear 852's. Do I need loose trucks to do this and do u have to be going very fast to do this? Thanks please reply to my comment
@someone19123 with those wheels you can do it at very low speeds which is where its most comfortable to learn (duh). Super loose trucks will definately help. Also, a small tip when learning is to throw way more weight into the slide than you think necessary, and carve hard into it. Hope that helps.
You didn't explain what you do with your upper body.. It seems illogical to twist your torso backwards while the board twists forward perpendicular to the road, but you seem to make it work. Is this a stylistic choice or something you're supposed to do every time?
do you recommend freerides, or flashbacks for an all around wheel, DH, freeride, tricks, sliding, ect.
LongboardBrasil23 1 week ago
@LongboardBrasil23 Flashbacks are better all around. Freeride's are a little on the slippery side for DH.
buzzboy7 1 week ago
i use the same gloves to make slide gloves...i feel special lol
travman305 1 week ago
Thats a heel side speed check...
WIR3zHD 3 weeks ago
Speed check isnt it rly
alf555666 3 weeks ago
What durocore r those?
monkeybizness8855 1 month ago
Dont try to find in youtube Robin - Frontside Ollie YOU WILL DIE IT IS SAME AS JUSTIN BIEBER BUT YOUNGER
Truttixpelailee 1 month ago
if your first learning to slide, 180s are much easier
Mapleboarding 1 month ago
shoud i have my trucks tight or loose?
Jakefillpot 1 month ago
@Jakefillpot loose is better, but it depends on the speed you will be doing these slides
bielfl95 1 month ago
How fast are you going. i have landed these but i feel like i can only do it with lots of speed.
RepresentinDa614 1 month ago
@RepresentinDa614 you can do this slide basically just pushing your board hard a couple of times, no need to be super fast
bielfl95 1 month ago
@RepresentinDa614 Thats good then, its better goin fast
CamberLongboards 1 month ago
You guys are all dumb this is clearly a coleman slide.
themichaelnuckles 2 months ago 15
@themichaelnuckles when was his hand on the ground once in this video. the coleman slide involves your hand on the ground.
pm7king123 1 month ago
@themichaelnuckles coleman slides are when you put one hand down
victorox98 1 month ago
@themichaelnuckles you put your hand on the ground for a coleman
theelephanttaco 4 weeks ago
@theelephanttaco i know this...
themichaelnuckles 2 weeks ago
@themichaelnuckles then whyd you say this was a coleman if he didnt put one hand down
theelephanttaco 2 weeks ago
@themichaelnuckles -_- Not sure if sarcastic, Or serious.
ThatReptileDude 3 weeks ago
thats a back stand up
kimbofb97 2 months ago
@kimbofb97 Actualy thats a FS speed check
superphil92 2 months ago
@kimbofb97 ur a fucking idiot
TheMahigetFamily 1 month ago
Comment removed
naptownlongboarding 2 weeks ago
This has been flagged as spam show
thanks man.. maybe the wheels are new thats why.. hehe.. btw.. thanks..
jasonangeloarcinas 3 months ago
Comment removed
jasonangeloarcinas 3 months ago
can you slides on a 78a wheels?
jasonangeloarcinas 4 months ago
@jasonangeloarcinas yes they slide if its the right wheels. 78a classic thane slides better then most wheels, and will slide better then 86a otangs.
Puntar7 4 months ago
@Puntar7 sike
fr0zdify 2 months ago
@jasonangeloarcinas Can you english?
jake20589 3 months ago
@jake20589 no.. why?
jasonangeloarcinas 3 months ago
flashbacks are dope.
supersmartfood 4 months ago
this is a backside slide, frontside is where you put your weight toeside
triviumfr3ak 4 months ago
@triviumfr3ak dumbass
naptownlongboarding 2 weeks ago
@naptownlongboarding yeah you obviously are so intelligently educated on your slide names. :)
triviumfr3ak 2 weeks ago
@triviumfr3ak go read some silvefish and shut up. i tech slide i know names of slides pretty well
naptownlongboarding 2 weeks ago
@naptownlongboarding thats why youre watching a tutorial ? i viewed this about 8 months ago and even then i was sliding like hell i was trying to find a tut to teach me how to fs slide and i could already do this lol
triviumfr3ak 2 weeks ago
@triviumfr3ak lol i can toeside no comply check i bet you don't even know what that is
naptownlongboarding 2 weeks ago
@naptownlongboarding sliding at low speeds is hard right ? im not even going to reply to you i just dont care anymore its not worth it.
triviumfr3ak 2 weeks ago
@triviumfr3ak lol i just said i tech slide i soft wheel slide just as much your a mistake to humanity
naptownlongboarding 2 weeks ago
shoudl i get rough griptape to do that like edger/Vicious or is this doable with normal griptape without problems?
hardweird 5 months ago
@hardweird
you could do it on any grip, but if you want some more grip anyway (which is always a good thing) get yourself some 24-grit GATOR GRIP
sapzap96 4 months ago
isnt this pretty much a frontside speed check
h0useismydrug 5 months ago
@h0useismydrug same thing dudebro
KeKeKeilan 5 months ago
I tires to do this and my board stopped and i ate it.
Xelsem 5 months ago
What kind of knee pads are those?
andrebpt 7 months ago
ok i have a pintail 43 with 70mm mini monster hogs and i cant figure out how to get it to break grip any help?
armyalphablack02 7 months ago
@armyalphablack02 Practice. Kick out your back foot more, keep your weight on your heels, hang your feet off the edge of your board a bit.
Fortune2point0 6 months ago
@Fortune2point0 can i do this from just foot pushing when riding on flat ground? i want to build up my confidence before i try at higher speeds haha
dodexodus 6 months ago
@dodexodus You can do small speed checks with just kicking out the back wheels, and maybe 4 wheel standups, but it's very difficult and tiring. Better to do it on a hill.
Fortune2point0 6 months ago
@armyalphablack02 man up by a Rayne or Landy?
TheOnlyTrueHumdinger 5 months ago
wats da name of the backround music
ricium 7 months ago
hey i was wondering what board and what duro the wheels are, thanks
105bentley 7 months ago
/watch?v=D1xW1F78W2U
LOOK MY STANDUPSLIDES WITH FLASHBACKS !!
playme7 7 months ago
I haven't seen a single decent standup slide. What's up with Abec11's video's.
SimonRonin 7 months ago
whats a good hardness of the weels for sliding ?
MrEzlon 7 months ago
@MrEzlon 81-84
bakelejambon 7 months ago
@MrEzlon IMO
bakelejambon 7 months ago
@bakelejambon what ? sry then for being a beginner wtf
MrEzlon 7 months ago
@MrEzlon 86a if you wanna bust into them with less force
sethman1996 7 months ago
This is a sweet vid nice tips but those are check slides ^_^
zFlATFiSHx 8 months ago
what board is this?
TennisAllTimes 8 months ago
Aren't those speed checks?
ThatOneGuy1027 9 months ago 23
@ThatOneGuy1027 same shit... differant smell
itsakadoozy95 8 months ago
@itsakadoozy95 wrd up to that
dontmugurself 8 months ago
@ThatOneGuy1027 nah other way around
theelephanttaco 4 weeks ago
Hi I have black 84 a zombies ly dropcarve and bear 852's. Do I need loose trucks to do this and do u have to be going very fast to do this? Thanks please reply to my comment
someone19123 9 months ago
@someone19123 with those wheels you can do it at very low speeds which is where its most comfortable to learn (duh). Super loose trucks will definately help. Also, a small tip when learning is to throw way more weight into the slide than you think necessary, and carve hard into it. Hope that helps.
DoCrazyShit 9 months ago
are these in 84a good for sliding and cruising?
JMLizardKing1971 9 months ago
You didn't explain what you do with your upper body.. It seems illogical to twist your torso backwards while the board twists forward perpendicular to the road, but you seem to make it work. Is this a stylistic choice or something you're supposed to do every time?
SymbolicHeartless 10 months ago
I used those same workgloves to make my slide gloves lol! i feel special haha.
PnoyPimpin 10 months ago
these are backside standups silly billy
MrVigel 10 months ago
those wheels look like the zombies
123sexyllama 10 months ago
it didnt work.
cod43211 11 months ago
lamest vid but i wont b the one to dislike there wasn't even a instruction on how to pull out lmao
bikefreak77rockON 11 months ago
song?
longboarding1230 11 months ago
but no one has a nice little hill like u have
oliwer32 11 months ago
@oliwer32 I do haha so eat it jk
kingkunck 10 months ago
i wish i could shred like that
jpsallum 11 months ago
CEREAL BOWL CONCAVE YESHHH
sookelongboardrida3 11 months ago
Comment removed
GGreenrock1 1 year ago
haha just ordered the discontinued 92a grippins, soo pumped to learn this
Kmann2202 1 year ago
how do u pull the board back
liamshapley 1 year ago
@liamshapley just pull in with your back foot and rotate your body back to regular position, it should come pretty naturally
mykegger08 1 year ago
Are the freerides side-set?
MrDutchboydan 1 year ago
what board
yoyoguy1000 1 year ago
How do biltin bearings make slides better?
NinjaSkillz12 1 year ago
im surprised he isnt using prescision trucks.
mryoyoninja 1 year ago
@mryoyoninja most people myself included don't like doing stand up slides on precision trucks. doesn't feel good
TheGreenlover16 1 year ago
what wheel are those on the video?
fidel7771 1 year ago
@fidel7771 Abec 11 72mm 81a Freerides
TheHolyPig 1 year ago
That's so cool to see that you have the highest rated comment.
TheBayViewer 1 year ago
wher I come from thats called a heelside speed check -0sick vid
Swagerama 1 year ago
are your gloves homemade by any chance becuase i just boght some FG gloves from home depo to make a pair of sliding gloves
aTerribleName 1 year ago
How much does this guy weigh? He looks like he could be 180+ which gives me hope of a good wheel for cause I'm 230.
dancexshoes 1 year ago
@dancexshoes being heavy isn't a bad thing for sliding. i'm around 200 and i rock cult classics. check out my vids.
merks91 1 year ago
I have abec 22 bearings but the government won't let me use them.
TheBayViewer 1 year ago 192
@TheBayViewer Huh, why not?
FckedUpFingers 1 year ago
@FckedUpFingers Cuz then I wouldn't need to buy gas for my car.
TheBayViewer 1 year ago
@TheBayViewer lol
FckedUpFingers 1 year ago
@TheBayViewer its cuz the cops cant catch you with anything over abec 13
hereforthechicks 1 year ago
@TheBayViewer what?? why not
aivieleeking 1 year ago
@TheBayViewer i got abec 80s i tried skateing them and hazmat came and took em :/
dabraca 1 year ago
@TheBayViewer fuck the government
SamLawsonAV 8 months ago
Comment removed
fightinirishpj 1 year ago
is that the new 39" asym or 41" asym?
AznSWGC 1 year ago 42
isnt that the hill where the gravity slidefest usualy is?
earthwingnewsletter 1 year ago
Sick! Is he riding a RBros Asym?
FortunexenutroF 1 year ago
@FortunexenutroF
I'm pretty sure. The slight drop makes me think so
parkourmormon 1 year ago
@FortunexenutroF yeah it says in the description...
guitarzan094 1 year ago
@guitarzan094 Didn't say in the description when I commented
FortunexenutroF 1 year ago
@FortunexenutroF fair enough
guitarzan094 1 year ago