usually when people swap v8's into rangers, what type of v8's do they use? i mean its not a v8 ranger engine right? do you use a f150 v8 engine or what?? (im new, trying to learn though, lol)
also... i heard that a ranger with a v8 engine swap will get way better gas mileage than a stock v6 due to weight to power ratio... makes sences to me... big engine, small truck... what do you think?? yours get better gas mileage??
i have a 94 ford ranger and my seedometer only gos up to 80 mph and i bugs me. on yours it looks like it is after market. where did u buy it and how did u install it
Thanks for all the comments guys! I already shelled the first transmission on the street. Im currently saving to build a bulletproof C4 with a trans brake. I'll have some vids of her pulling a tire as soon as I get it back together!
@wantapgt It rarely makes it out on the street anyway. It hooks good on the racetrack. This vid was with a set of 275/40-17 Riken street tires. Those wont hook up at all on anything. Haha. Im going to get some wrinkle wall et street tires so it will grab the ground.
@wantapgt It can be. It hooks up with wrinkle walls. My father just built a badass C4 with a trans brake and upgraded components. Well see if it still hooks! Haha.
@CircumstanceBand yall did good. hell did WELL beyond good. littel traction? who cares. if you know how to use the throttle like you did. youre fine. i look forward to mreo videos. this was in sane. maybe a driveby video? im subscribed lol :)
hey i like how you did ur gauge cluster is that aftermarket or did u make it yourself and put some gauges in it?? jw bcuz i would like to do something custom like what u got set up with my 91 ranger
@DjayJohn That would be the basically stock stall converter putting the motor into gear bind at lower RPM's. But I'm sure you can dyno motors with your ears and Youtube videos.
@CircumstanceBand ive seen what 700 hp does.And it doesnt show in this video.with the amount of torque you are supposed to be putting out.you should spin the tires in 2nd and third gear
@DjayJohn Well, as a matter of fact it does blow through the tires in 2nd and 3rd gears. Especially now with the 3500 stall. Hell man do the math your self, the setup is right there on the screen. I'd be surprised if it wasn't making more power than I'm guessing. Like I said before, a motor like this is inefficient at lower RPMs. The converter in this video was a Jegs street converter which wasn't worth a shit and was completely inefficient. Its too radical for the street now.
Here is the rundown: Standard Bore FR302W Boss Block Eagle 327cid Rotating Assembly P600b Procharger @ 10 psi AFR 2.02/1.60 180cc intake runners, polished chambers/exhaust ports Comp Cams XE284H Camp with Comp Tie bar lifters Motorsport 1.6 stud-mount rocker arms Edelbrock Victor Junior Intake Quickfuel 750 E85 carb C4 trans with 3500 stall 8.8 Explorer rear end narrowed on longer side Cal-Trac Link Bars Thats all I can think of.
This has been flagged as spam show
nice truck
usually when people swap v8's into rangers, what type of v8's do they use? i mean its not a v8 ranger engine right? do you use a f150 v8 engine or what?? (im new, trying to learn though, lol)
also... i heard that a ranger with a v8 engine swap will get way better gas mileage than a stock v6 due to weight to power ratio... makes sences to me... big engine, small truck... what do you think?? yours get better gas mileage??
illdieinthegym 1 week ago
only rednecks put a cobra symbol on the dash of their truck
chippewa1994 2 weeks ago 2
@chippewa1994 Alright. Who gives a fuck?
CircumstanceBand 2 weeks ago 5
@CircumstanceBand The Ranger symbol would look better, just sayin'
chippewa1994 2 weeks ago
Sounds like a beast......but u did not go very fast
classiccarfan100 4 weeks ago
your rpm's appear to be at 0...
gm556 1 month ago
did the truck have any rust in it?
TheBlu0yster 1 month ago
If it only puts out 12 psi thats no procharger
shadyaftermass 1 month ago
@shadyaftermass It is a P600 B. You are welcome to buy me a D1SC if you would like.
CircumstanceBand 1 month ago
show us your motor
maverickford79 1 month ago
I would like to wrap my big black lips around your shifter, if you know what i mean - for a ride in that thing.
TinnInches 1 month ago
Wicked!
Codeblauananas 1 month ago
Ive never heard of a 327 stroke. is it still a ford?
killionair13 1 month ago
@killionair13 It is the same as a 331 but with a standard bore.
CircumstanceBand 1 month ago
I think I need to change my panties..
NagisaChobit 2 months ago
Is your speedo calibrated? That truck is fast as fuck.
coolguy112286 2 months ago
@coolguy112286 It's pretty close.
CircumstanceBand 1 month ago
@CircumstanceBand speedo jumped pretty heavy at 1:12. from like 60-100 like 1 second lol
strokerguy92 3 weeks ago
sad that in 3 days the last ranger ever will be built D:
789films 2 months ago
respect bra
thedudecam 3 months ago
Amazing little truck dude!!!!! Would have found a little less fugly road to play on though
patrickharmon70 3 months ago
@patrickharmon70 who cares what the road looks like?
dickknuckle707 2 weeks ago
why dont you hook up your tach? a tach is more useful than a damn speedometer. who gives a shit about that we already know your speeding lol
dillonmuhman 3 months ago
did that steering wheel bolt right in or?
gordonsandvig 4 months ago
that truck booms dick dude....so fast
kingreinheimer 4 months ago
The music detracts from the truck!
biscuitninja 4 months ago
i did enjoy it. pretty sweet especially the hillbilly woot lol
PaintballerPat 4 months ago
DAMN! I have always wanted to put 302 into a old ranger... this i think just inspired me to do so... as soon as i get a bit of cash haha
TYL3R35 4 months ago
im prolly gonna do a v8 swap on my bronco 2, but prolly just a 5.0l/302
huckster78 5 months ago
Does it have a shifter kit in it
SuperStangbanger 5 months ago
isn't a 8.8 rear way to short?
sk8forlife90 5 months ago
LOL at the "Hillbilly WOOT!" caption in the video
CumminsISB24V 6 months ago
thumbs up if your the 27,000 viewer!!
Z3CHYD 7 months ago
i have a 94 ford ranger and my seedometer only gos up to 80 mph and i bugs me. on yours it looks like it is after market. where did u buy it and how did u install it
kdbronc 7 months ago
Damn at :28 watch how fast the speedo climbs!
94StrokerZ28 7 months ago
holy shit that thing screws
MCM5595 8 months ago
I wanna do something similar to my 94 explorer limited only problem is it's a bit heavier
fishermankory 8 months ago
This has been flagged as spam show
I subscribed, I wanna see more of this truck
70dustpan 8 months ago
i forgot why i love rangers so much. that is one bad arss lookin truck, im very jealous. sweet.
jmanwild 8 months ago
what heads an cam are u running sweet truck,,,
331lilcoupe 9 months ago
@331lilcoupe Were running a comp XE284HR camshaft with ported and polished AFR 180 heads with a 58cc combustion chamber.
CircumstanceBand 9 months ago
NICE
takethehitgee 11 months ago
Thanks for all the comments guys! I already shelled the first transmission on the street. Im currently saving to build a bulletproof C4 with a trans brake. I'll have some vids of her pulling a tire as soon as I get it back together!
CircumstanceBand 1 year ago
@CircumstanceBand do you have a ratchet shifter on that C4? and I guess a manual valve body too? I saw you throwing it forward so I wasn't sure
MrMaverickkid70 4 months ago
Isnt it annoying driving a ride with so little traction though?
wantapgt 1 year ago
@wantapgt It rarely makes it out on the street anyway. It hooks good on the racetrack. This vid was with a set of 275/40-17 Riken street tires. Those wont hook up at all on anything. Haha. Im going to get some wrinkle wall et street tires so it will grab the ground.
CircumstanceBand 1 year ago
@wantapgt It can be. It hooks up with wrinkle walls. My father just built a badass C4 with a trans brake and upgraded components. Well see if it still hooks! Haha.
CircumstanceBand 9 months ago
@CircumstanceBand yall did good. hell did WELL beyond good. littel traction? who cares. if you know how to use the throttle like you did. youre fine. i look forward to mreo videos. this was in sane. maybe a driveby video? im subscribed lol :)
yamahonkawazuki 8 months ago
Dude........seriously.........I TOTALLY ENJOYED THAT!!!
Wow, what a truck. My bro and I built up my 92' ranger with a 302 bored .040 over with all the goodies.
Nothing like this though....Good job!
ironranger308 1 year ago
I JUST CAME
joedrummer2010 1 year ago
hey i got a 93 splash 302
and im makeing a gauge cluster
with the phantom 2.
i was woundering what size gauges are your'e
water temp and oil psi are?
IBNZnate 1 year ago
hey i got a 93 spash 302
and im makeing a gauge cluster
with the phantom 2.
i was woundering what size gauges are your'e
water temp and oil psi are?
IBNZnate 1 year ago
@IBNZnate They are some cheap ass Equis guages and they are very small. My uncle made the cluster panel for me.
CircumstanceBand 1 year ago
@CircumstanceBand are those the kind you can get at like O'Reily?
DeanMLFlame 1 year ago
hey i like how you did ur gauge cluster is that aftermarket or did u make it yourself and put some gauges in it?? jw bcuz i would like to do something custom like what u got set up with my 91 ranger
rangeranger91 1 year ago
@rangeranger91 My uncle helped me make the panel.
CircumstanceBand 1 year ago
this doesnt even look like 400 hp..let alone 700
DjayJohn 1 year ago
@DjayJohn That would be the basically stock stall converter putting the motor into gear bind at lower RPM's. But I'm sure you can dyno motors with your ears and Youtube videos.
CircumstanceBand 1 year ago
@CircumstanceBand ive seen what 700 hp does.And it doesnt show in this video.with the amount of torque you are supposed to be putting out.you should spin the tires in 2nd and third gear
DjayJohn 1 year ago
@DjayJohn Well, as a matter of fact it does blow through the tires in 2nd and 3rd gears. Especially now with the 3500 stall. Hell man do the math your self, the setup is right there on the screen. I'd be surprised if it wasn't making more power than I'm guessing. Like I said before, a motor like this is inefficient at lower RPMs. The converter in this video was a Jegs street converter which wasn't worth a shit and was completely inefficient. Its too radical for the street now.
CircumstanceBand 1 year ago
wish i had a V8 in my ranger!
sleepybone321 1 year ago
Its a song by my band. The song hasnt been released officially yet. The band is called Circumstance. We have an EP coming out 01/01/11. Check it out!
CircumstanceBand 1 year ago
thats a badass ranger man. hey whats the name of the song playin in the background?
RollinFR 1 year ago
Comment removed
RollinFR 1 year ago
tight.
RollinFR 1 year ago
Thats a badass ranger man. What song are ya playin in the background?
RollinFR 1 year ago
You gotta get some louder mufflers man. How much hp she putting out?
Metallica0493 1 year ago
@Metallica0493 not sure. I'm guessing around 700rwhp.
CircumstanceBand 1 year ago
please. MORE VIDEOS OF THIS BEAST!!! please?
Z3CHYD 1 year ago
Quick isn't even the word for it.
Metallica1071991 1 year ago
CircumstanceBand 1 year ago
Yeah, that tach is a piece of garbage!
CircumstanceBand 1 year ago
tach not working?
derek2007 1 year ago
it can be whatever you want it to be...We are talking cubic inch, not the what noobies know as a "specified" motor. Its all in the bore.
element6of6one6 1 year ago
It is a Small Block Ford 302 Windsor with a stroker crank/rods. It would be a 331 if it was .030 in. overbored.
CircumstanceBand 1 year ago
isn't a 327 a chevy motor???
malicedjoker 1 year ago
@malicedjoker your thinking of the 323 5.3? thats a chevy, i think 327 is ford
100000014 1 year ago
@malicedjoker if you cant read itsays its a SBF 327 stroker...more then likely a bored and stroked 302 block.
oilfield666 1 year ago
that sounded like a Homer Simpson yell
SSJ4Vegetto 1 year ago
make a vid of what it looks on the ous side
ps3fanboy1885 1 year ago
hahah fuck yea thats the coolest thing i have ever seen
danthemovieman19 1 year ago