i got a '79 rx7 with a 351w v8 and t-5 tranny and 8.8 rearend and its got 400+ horsepower and does 11.2 1/4 mile currently... and it should after a dyno tune get into 10's i got a video of my car in channel profile... but i dont got racing footage yet
@FUGGINGMAD DOnt worry man I have owend alot of rotarys and have never had a problem especially with that one as it is heavily built to hand extreme conditions and boost.
The video describes my situation exactly. I finally got my FC running right after 6 months of being on jackstands, and on the day I wanted to take it out, I woke up to 3 inches of snow. I hate winter, we get teased with a week of snow-free t-shirt weather, then it's right back to being shitty.
Although gayfag is a fag, I know American cars are shit. But technically he/she is right. Anything from Japan is a rice burner. Thats where the saying came from!
@Funboymark Its Rice because people with Foreign cars are the morons who started doing shit like fart cans and wings, and since there from Asia why not call it rice?
lmao Fender would be correct dude. It's the people who slap on the cosmetic upgrades without actually doing anything performance to back it up. A car is not instantly RICE because it's from an asian country.
@Funboymark I have to say that I agree with Fender on this one. Any car can be riced out, if people are dumb enough. Look into tuner cars. Generally, they're Asian cars (Toyota, Nissan, Honda), that are modified to go a lot faster, and don't look or sound ridiculous like the all-too-well-known rice burners. 'The more you know!"
@Fender927 Nice description. My recently dead Toyota Corolla Wagon was a total sleeper. Outside looked totally stock except for being slightly lowered. Under the body and hood was a different story.
@Fender927 wtf are u talking about?? a ricer is a honda or corrola or acura with big body kits annoying mufflers and ugly rims thats a ricer. a mustang no matter what it has on it will always be considered a muscle car.
Hey man thats pretty sick, I have an 83 limited edition rx-7 Ive been looking for a turbo for a long time, I just cant find any...where did you get your supercharger? Know of anywhere I can get a turbo? Ive got tons of upgrades, Ive dropped a few thousand since I got it...just need a turbo haha, lemme know, thanks
With a supercharger on a rotary the one down fault is the RPM limits you have... with my motor because of the porting I have a high red line but the supercharger is rated for no more than 8500 RPM so if you are looking for all out power you will want to go turbo and 13B But my car if very fast very reliable and quite unique, And the supercharger sounds awsome on a rotary.
Have you raced anybody yet? How about a quater mile time. I have already bought a 600cfm holley and have ported the stock intake to hold it. Do you think that will be enough for 10 pounds of boost and a possible extended port motor, 12A.
What size carb are you running? I have an 83 RX-7 and either want to turbo or supercharge it. I also want to know how much power you are running, and the amount of boost. It looks like about 5psi.
your stock gagues read 220 on a 12a... something tells me those arent stock lol
wa11pon33 1 year ago
i got a '79 rx7 with a 351w v8 and t-5 tranny and 8.8 rearend and its got 400+ horsepower and does 11.2 1/4 mile currently... and it should after a dyno tune get into 10's i got a video of my car in channel profile... but i dont got racing footage yet
Diminish420 1 year ago
Too much porting on my motor the overlap of the Bridge Port wont build good vacume or unloaded boost
johnsmack1 1 year ago
I would have called bullshit on the SC in here, but I did faintly hear it... you should be able to make boost without load though, mine does
Rx7man 1 year ago
you got a completely different dial set up than i do o.O wut yr? cuz i got an 82. and my spedo only goes t 140, yers goes to 220 ??
WestHillHollywood 1 year ago
I love rotarys
greengaurd 1 year ago
Ok i hear it. lol
adam3176 1 year ago
what kind of boost is it putting out? it seems the boost gauge doesn't look like its calibrated or something
boarderboi7 1 year ago
@boarderboi7 It put out 8PSI and the boosy guage worked it just doesnt make boost without load
johnsmack1 1 year ago
Rotarys dont like reving without load man... Apex seal death material..
FUGGINGMAD 1 year ago
@FUGGINGMAD DOnt worry man I have owend alot of rotarys and have never had a problem especially with that one as it is heavily built to hand extreme conditions and boost.
johnsmack1 1 year ago
@johnsmack1 Yeah righto; i'm just saying reving them without load can cause heavier rotor chatter
FUGGINGMAD 1 year ago
dont her a supercharger
FunnyBoi555 2 years ago
@FunnyBoi555 probably not as it has a free flowing 2.5" exhaust on it so it is hard to hear the charger without load
johnsmack1 1 year ago
This comment has received too many negative votes show
great video, fag
jastabler 2 years ago
yea, high rev that cold engine you dumb shit.
jastabler 2 years ago
@jastabler the temp guage hasent worked right since I installed the aluminum radiator but it was warm thanks for the concern dumb shit
johnsmack1 1 year ago
Put some gas on that thing!!!
gunny1402 2 years ago
dude dont drivee it in winter unless u want it to get rusted
sirpillow69 2 years ago
@sirpillow69 I dont drive it in the winter it was garage kept
johnsmack1 1 year ago
Didnt see a supercharger. Didnt even hear it.. I think its all a LIE,
adam3176 2 years ago
technically the wankel is a supercharger..
but this one is n/a
K33G1N 2 years ago
This has been flagged as spam show
Technically you suck cock.
bnz500 2 years ago
lol
catfisher10100 2 years ago
@K33G1N you are wrong my friend she was supercharged but in the end it didnt work well with the bridgeport the S/C couldnt handle the high revs
johnsmack1 1 year ago
you can hear it when he revs the engine
Vortes 2 years ago
@adam3176 check out my other vids you will see it has a camden 7" with a Holley 650 double pumper on it
johnsmack1 1 year ago
@adam3176 i could hear it, just barely. duh, you can see the boost gauge and hear the high volume fuel pump.
danrichards23 1 year ago
The video describes my situation exactly. I finally got my FC running right after 6 months of being on jackstands, and on the day I wanted to take it out, I woke up to 3 inches of snow. I hate winter, we get teased with a week of snow-free t-shirt weather, then it's right back to being shitty.
noob5000000 3 years ago
Comment removed
abominableaussieman 3 years ago
This comment has received too many negative votes show
decently tuned rice burner good work
(rice burners are japanese cars, i like all american)
MadCat58 3 years ago
All japanese cars are ricer burners? your a fucking moron.
Fender927 2 years ago
Although gayfag is a fag, I know American cars are shit. But technically he/she is right. Anything from Japan is a rice burner. Thats where the saying came from!
bnz500 2 years ago
No, 350z's arent rice burners. Rice means Racing Inspired Cosmettically, A mustang with rims and a flight wing is rice to.
Fender927 2 years ago 8
Rice isnt an acrynym dude, its Rice because people associate Rice with East Asia where the cars come from.
Funboymark 2 years ago 4
@Funboymark Its Rice because people with Foreign cars are the morons who started doing shit like fart cans and wings, and since there from Asia why not call it rice?
Fender927 2 years ago
Thats what im saying.
Funboymark 2 years ago
lmao Fender would be correct dude. It's the people who slap on the cosmetic upgrades without actually doing anything performance to back it up. A car is not instantly RICE because it's from an asian country.
Draelren 2 years ago
@Funboymark your a idiot... rice is any car domestic or import that is all cosmetic and no performance
Tj1056 1 year ago
@Funboymark I have to say that I agree with Fender on this one. Any car can be riced out, if people are dumb enough. Look into tuner cars. Generally, they're Asian cars (Toyota, Nissan, Honda), that are modified to go a lot faster, and don't look or sound ridiculous like the all-too-well-known rice burners. 'The more you know!"
NExplosion666 1 year ago
@Fender927 Nice description. My recently dead Toyota Corolla Wagon was a total sleeper. Outside looked totally stock except for being slightly lowered. Under the body and hood was a different story.
yerboogieman 1 year ago
@Fender927 wtf are u talking about?? a ricer is a honda or corrola or acura with big body kits annoying mufflers and ugly rims thats a ricer. a mustang no matter what it has on it will always be considered a muscle car.
TwistTheThrotle 1 year ago
@TwistTheThrotle haha your wrong... big huge wing some ghetto rims and body kit is rice on anything you put it on
Tj1056 1 year ago
No.
yerboogieman 2 years ago
gorguz!!!
XCLUSIVINC 3 years ago
sounds good. what exhaust do you have?
fBlovin 3 years ago
i have a 1980 rx7. what turbo/ turbo kit did you use.
wanklerotaryaddict 3 years ago
Hey man thats pretty sick, I have an 83 limited edition rx-7 Ive been looking for a turbo for a long time, I just cant find any...where did you get your supercharger? Know of anywhere I can get a turbo? Ive got tons of upgrades, Ive dropped a few thousand since I got it...just need a turbo haha, lemme know, thanks
pistondestroyer 3 years ago
take it for a fang!
Nigelmalibu 3 years ago
Outstanding !!!!!!!!
A.P.B on this rx7 reads armed and dangerous
JuanPapaNicolao 3 years ago
ok im a noob when it comes to cars how much does it cost to supercharge a car?
masterofthekeyblade 3 years ago
well for a noob it costs more because you need a kit. If your good tho it can be very cheap.
aaron9696024 3 years ago
how do you super charge a 12a engine i have it race ported but cant figure out how to do it plus will the seals hold
mixmasterdylan 3 years ago
This comment has received too many negative votes show
dude thats gay
stonedsparky 3 years ago
hey, i have a 12A series 1 rx7 and i am wondering how much it costs to get these thing supercharged?
abominableaussieman 3 years ago
Like I said, I am in love...
tiltmode43 4 years ago
With a supercharger on a rotary the one down fault is the RPM limits you have... with my motor because of the porting I have a high red line but the supercharger is rated for no more than 8500 RPM so if you are looking for all out power you will want to go turbo and 13B But my car if very fast very reliable and quite unique, And the supercharger sounds awsome on a rotary.
johnsmack1 4 years ago
Have you raced anybody yet? How about a quater mile time. I have already bought a 600cfm holley and have ported the stock intake to hold it. Do you think that will be enough for 10 pounds of boost and a possible extended port motor, 12A.
rotarymiata 4 years ago
What size carb are you running? I have an 83 RX-7 and either want to turbo or supercharge it. I also want to know how much power you are running, and the amount of boost. It looks like about 5psi.
rotarymiata 4 years ago