it is loud because a tooth is broken on the Mod 1 gear of 52 teeth. I was doing numerous quick full throttles, the first time I did it from a stand still the car jumped straight up into the air and landed on it's side. I have upgraded to a higher grade gear and put thread lockon the screws to insure proper gear mesh. it has been holding up.
I
watts, I asked Castle if this motor can handle this lipo, and they said it should be fine with my setup and driving.
@4Rracing anyway thats a real good setup, ive always got ++ respect for custom work, i found your page cos was researching to build a 1/5th brushless but im just gonna hold on to see what the xo1 is like, i really wanted a 100mph 1/5th but i think the brushless are just not quite there yet for this size, anyways take care mate
I could be wrong but I think that's closer to 3.35 horse power at 2500 watts. The 4082 motor in my 1/12th scale Miss Geico boat is rated at 3500 watts and only produces 4.69 horse power. It takes 745.7 watts to produce 1 horse power according to the vast majority of formulas used for rc. That seems to be the standard. That is an impressivespeed for a 1/5th scale car though. What's the kv rating of your motor and who makes it?
the drivetrain sounds fucked, somethings grinding?
levrone007 3 months ago
@levrone007
it is loud because a tooth is broken on the Mod 1 gear of 52 teeth. I was doing numerous quick full throttles, the first time I did it from a stand still the car jumped straight up into the air and landed on it's side. I have upgraded to a higher grade gear and put thread lockon the screws to insure proper gear mesh. it has been holding up.
I
watts, I asked Castle if this motor can handle this lipo, and they said it should be fine with my setup and driving.
4Rracing 2 months ago
@4Rracing anyway thats a real good setup, ive always got ++ respect for custom work, i found your page cos was researching to build a 1/5th brushless but im just gonna hold on to see what the xo1 is like, i really wanted a 100mph 1/5th but i think the brushless are just not quite there yet for this size, anyways take care mate
levrone007 2 months ago
Try as you may you won't find that stated by Castle for that motor. People often make mistakes and I can accept that.
ecoovert 3 months ago
I could be wrong but I think that's closer to 3.35 horse power at 2500 watts. The 4082 motor in my 1/12th scale Miss Geico boat is rated at 3500 watts and only produces 4.69 horse power. It takes 745.7 watts to produce 1 horse power according to the vast majority of formulas used for rc. That seems to be the standard. That is an impressivespeed for a 1/5th scale car though. What's the kv rating of your motor and who makes it?
ecoovert 4 months ago
@ecoovert I read somewhere that the Savage Flux motor was 6hp? Hmmm, must be wrong! Do you know what it puts out?
ben150785 3 months ago
nIce
TheONE0629 5 months ago
Sensorless motor?
ItalyNerf 5 months ago
Whats with the motor mesh? Or is it an uncensored motor?
blowenfuse 7 months ago
hey do you know steave . I made one of for him. I also did one for my self and went over 84 mph @ the fontana speed way. ISC
grydertownmember 9 months ago
wats rong with the gearing, stripped?
sjiyuey 10 months ago
Off the chain ? I'ed buy that for a dollar .
MYSTIKAL8 11 months ago
@MYSTIKAL8 there is no chains in electric just gearing
sjiyuey 10 months ago
WTF is that clickin noise??
popcorn8199 1 year ago
hört sich nicht so toll an
punisher01737050445 1 year ago
reminds me of my mii late model it looks just liek the way it drive only bigger
zachb9257 1 year ago
SWEEEEEEEET!
208BMAN208 1 year ago