Stanley Meyer Style Hydroxking v1.3 Cell

[16f8771]

I haved looked into the d14 doc. it appears to be nonsense. ravi/lawton cell is dead technology as far as i can see. lawton developed it back in the 80`s from memory.

[xsports49]

Have you tried driving a transformer with your pwm yet? I have a lawton pwm and havent had any luck driving any kind of transformer yet

[tonsostuff]

This is a pile of crap, high school variety electrolysis. Stan Meyer was NOT utilizing electrolysis. Stan invented Electromagnetic Disassociation. These electrolysis tubes are like a fat, ugly asses; everybody's got one and posting a video of it on YouTube! Stan produced enough gas to run a car with milliamps! I'll give you $12.00 for that box. That's how much is cost me to build the one I have that is exactly like the one you probably want $200.00 for. Anyone want mine for $50.00.

[QuarkToo]

"Stan produced enough gas to run a car with milliamps!" Not quite smarty pants... The 200 ma went to the rotor of the alternator which is typical. The alternator was driven by a 2 horse motor which draws 1500 watts of power and it never ran a car above idle and only if plugged into the house current.

What Stan eventually did was rip off Puharich by making ozone in a laser ozone generator, mixing it with steam to produce H2O2 which is rocket fuel with a molecular bond angle of 109.28 degrees.

[QuarkToo]

A 55 horsepower VW engine requires around 2 HP to idle which is roughly what the electric motor produced and the extension cord would supply. The hydrogen was an energy carrier but the car was not actually using water as fuel, it was running on electricity at this point of the development.

[xavierspl]

PWM + Pulse Width Modulator..  If anyone is interested the PWM used in this video is the last of the best ones around and I am considering selling it, email for details..

[Jay12341235]

what does PWM stand for?

[minde4000]

This is Meyer STYLE only. ONly looks like it lol. In order to achieve unipolar wave resonance you must tune your circuit with 10-15 equations meyer has 10kohm SS chokes and spec toroid. Need to be really good in electrical and LCR circuits to replicate this. Looks great tho. Meyers tech brief has everything you need.

[xavierspl]

Cool video, and thumbs up on the cell. Am curious where you gained your knowledge on this. Are you self-taught or could some of it be attributed to having highly intelligent parents?

[minde4000]

Hmmm... As far as I can see its just a regular brute force electrolysis with very low production. Disconnect PWM and applie 2.2 amps will get same output. No transformers... no chokes... no bifilar coils.. no resonance producing step up waves and you call this efficient? Seems you not quite sure how real meyers system works sorry.

[AndrewR1976]

Thanx for the video.

I've got the d14 and would to know what is the key to find a resonance?

I have the tubes 16 and 21 mm diameters. The gap between the tubes is 1.6 mm. I've tried the tubes of 100mm length. It seems, that I have a basic electrolysis with some frequency. So need to find a resonance.

Is it viable to get the good gas production in about 50mAmp and 12 volts with this d14 aquapulser? What could be a tip to find a resonance with d14?

Thank you. Looking forward new vids from you.

[ipctec]

good work :o)

[xavierspl]

We can make guesses as to what we "should" get for current, but that's it.. I haven't seen anything yet that produces much of anything at .5 amps.. (would be nice though!) If you used tap water and/or conditioned cells the current and HHO production would be higher. (tap water has a lot of conductive metals, etc, and conditioned cells have lower resistance)

[drluckyblader]

what? 2.2 amps? with this system, you should only have about .5

With regular tap water and conditioned tubes, is the amp count smaller?

[sabel1]

In sweden were I live, we pay about 8,7$ per gallon... STOP COMPLAINING, get used to it...

[xavierspl]

Hmmmm, maybe that's why Sweden had the highest suicide rate in the world?? lol...

[sabel1]

Acually Japan is no:1 :) I think sweden is like number three... after finland and japan

[wehde48]

yeah but what is the cost of living? what is the minimum wage? what does a whopper cost at burger king?

[sabel1]

well for the same job, americans earn more money... a whopper with out the menu cost about 4-5$ and we pay 9.3/gallon

[serphant420]

so you are attempting on improving on Lawtons PWM? interesting. I look foward to hearing about this. I have made a stan meyer type cell and I see one thing that you all leave out. When I added this simple step it doubled my hho production. Maybe we can share secrets

[ActionIsEverything]

Secrets?

I thought this was a "one for all" thing.

I won't be keeping any secrets ;-)

[xavierspl]

As for the installation in a vehicle, we are waiting for the new PWM to be done first, and are working on a new idea for dealing with the A/F calibration and will be installing a double for quad cell in a 2007 Jeep Grand Cherokee. It will of course be posted here for all to see.

[xavierspl]

We are very psyched about the bubbler actually, I just sprayed it with engine enamel and it looks unbelievable. People keep asking us for ALL the components needed for a complete system, and this was just an example of how we don't want to offer it until we have something unique. The new PWMs are definitely going to be our biggest project, and our main focus for awhile. Thx for the support guys, we really just want to see more people get involved in this research for all our good.. Xavier

[djabby]

I saw the Hydrogen/HHO Bubbler Flashback Arrestor Gas Dryer Combo on ebay. It's a beauty!!

[djabby]

Many of us are interested in installing one of these type units in our vehicles to suplement and reduce our gasoline consumption. Have you a cell or two currently in a vehicle and do you have any fuel savings to report to date?

[xavierspl]

Thanks so much, we like the unit but we're improving it daily as this is still a new project. The last 2 designs we tried were plates and we prefer the tubes (even though they're tougher to work with and more $) The new PWM prototype should be ready in the next 2 days, and we'll be adding videos to show it, we should have a couple bubblers ready in the next 2 days or so.

[djabby]

I have been watching in the wings for some time the avrious attempts at HHO cell design and fabrication, your's may be the best thought out and constructed yet!! The water purifier body has been a mainstay for a long time, and your use of tubes rather than plates lends itself to that platform well. Any plans for a bubbler, pulse unit, or wiring harness?

[xavierspl]

Thanks for the comments, we can not tell you a number as we do not have any accurate way to measure it yet, and there are already too many people posting rediculous claims IMHO. Our humble opinion on the efficiency is based on the facts shown in the video, 25watts or so in de-ionized water, visually you can see impressive results, our goal is not highest output - it's highest efficiency. We make these cells and will be posting our first batch on Ebay this week.

[johthe]

You say very efficient, but how efficient? What is the output? Maybe you can show in a later video.

[zmance]

Absoultely great video. I have been looking for a chamber like that, is that a large water filter shell? Where did you get it at, Im looking for one just like that! Thanks