AGM GBB M4 quick review

[wings400]

mine broke after a month of light usage. after that I got a WE m4 and I am happy now :)

[paratroop24]

Can it use WA magazines?

[airsoftnaota941]

@paratroop24 Yes it can, it is WA compatible.

[cobrafriends]

@paratroop24 its compatible with almost every gbb m4 mags

[varun009]

agm m4a1 gbb quick review: it sucks mine broke in 2 months save you're money and get a classic army.

[Unknown8186]

@varun009 Maybe its not the gun's fault maybe its you. You might have not clean it well or you keep firing in full auto there is alot of percent that you broke the gun.

[Unknown8186]

@varun009 And don't be angry at me becuz I also broke some of my guns because of not taking good care of it. :/

[varun009]

@Unknown8186 first of all, a gun should be able to be fired on full auto without damage. second i cleaned that fucker.

[Unknown8186]

@varun009 Guns may not be shot in full auto continually those are the gun's limit even real guns. What part of your gun broke? BTW

[varun009]

@Unknown8186 bolt catch, carrier and charging handle. also the mags leak. it's not me dude. i take very good care of my guns. plus all the problems i've had with it aren't restricted to me, many people online have had the same problems.

[mercz37]

Bubble Wrap. Bubble Wrap everywhere.

[PYR0NinjaPXG]

@mercz37 What is OP?

[DJImfamuos1408]

you need to clean your room MR.

but nice gun.

[cccplt]

clean your room !!!

[rickyy1234567ify]

Nice les paul and gundam figures good review

[kanudeell]

before u say my gun broke say what u were doing when it broke ofcourse all airsoft broke if u smash them !!!

[airsoftnaota941]

@kanudeell Yes, I took my gun then threw it on the ground. I then proceeded to smash it with a sledge hammer. That's how it broke. But on a serious note, it broke because the materials were of a low quality and the nozzle was cheaply made. The only good thing this gun is good for is the externals, everything else is crap.

[grunticus09]

@airsoftnaota941 Is it compatible with better brand internals? Does ANYONE know the answer to this?

Thanks

[airsoftnaota941]

@grunticus09 It's compatible with all WA system parts. The only part that is proprietary is the buffer tube since it uses special threads.

[grunticus09]

@airsoftnaota941 Is it worth getting if the parts are available for a fix? Do you know anything about the KJW M4 GBB. My main concern is trying to find a good quality gun out of the box with all or most of the internal parts available as spart parts purchasing.

[airsoftnaota941]

@grunticus09 Is it worth it? Depends really, I think not. I built a custom gun and spent less than I did with my AGM+Parts. And I used all g&p internals for the custom. As far as reliability goes the KJW has the best out of box performance. But doesn't have a lot of after market support. Western Arms types can be finicky but have the most spare parts available.

[grunticus09]

@grunticus09 So is the KJW FIXABLE if something breaks. The Common issues with a GBB Platform. Like the bolt.... That is my main concern. I mean what is the chance that something internally fails in the gun? And do you know when all the brands of M4A1 GBB Platforms are back in stock ANYWHERE? G&P, King Arms and VFC are all sold out everywhere. I personally wanted the vfc. Very well built.

[airsoftnaota941]

@grunticus09 Fixable yes, finding the parts now that I don't know. Most over seas places have them in stock. The Vfc is a modded Western Arms system with a few tweeks.

[grunticus09]

@airsoftnaota941 I found out that the kjw is my best bet. Its the best built out of the box and it has the most reliablity out of all of them. And is said to have one of the best gas consumption records to date. I cant upgrade it but i can get any internal part replacement from kjw. also, the parts are pre-upgraded to full steel parts. NO pot metal in this baby. BUT the bolt mechanism is plastic because of regulations. I dont care. to many positives to it. Thanks for the info.

[PEIDanielScott]

Thumbs up for gundam figures.

[millionpop]

where can i get this gun for cheap price?

[nakazatoGTR]

having seen these problems i did:

>purchased AEG barrel Hop unit/Adapter(doing 200f laser straight shoots, very very thick hop rubber)

>purchased appropriate sized o-ring to fit into magazines(yes round will form into square)

but still:

>hammer broke-replaced with element with bearing

>bolt lock broke-waiting for new sets but of course still shoots.

[revolverroman]

what kind of shippin? idk when my marushin revolver is coming in. i ordered it sunday and still waiting. Some people say 3-5 days others say 10-14

[airsoftnaota941]

@kulatz18 Evike doesn't sell the AGM M4 GBB, they never have. The externals are metal while the internal specifically the nozzle are made of cheap plastic and will break very quick.

[junior02150]

Were did you buy It?

[airsoftnaota941]

@junior02150 It's in the video and description.

[thatkindofguy234]

I'm thinking of buying this but heard it breaks really fast? is this true??

[airsoftnaota941]

@thatkindofguy234 Yes, mine broke within a week. Sold it and since then built a new M4

[kulatz18]

@airsoftnaota941 Lol AGM m4 not broke for a week just buy the agm m4a1 gbb full metal for saving a money

[TheGarandGuy]

@airsoftnaota941 how did it break/what broke?

[airsoftnaota941]

@TheGarandGuy The nozzle and hopup broke, and the mag seals broke. I sold this rifle a long time ago and just built a custom with G&P parts.

[TheBlabla1996]

@airsoftnaota941 was it hard to do?

[airsoftnaota941]

@TheBlabla1996 No, just buy all the parts and assemble. That easy.

[TheBlabla1996]

@airsoftnaota941 it is not easy for me, i cant find the trigger mechanisme

[TheBlabla1996]

@airsoftnaota941 is the trigger assembley a pain in the ass, because i cant find any parts for that

[airsoftnaota941]

@TheBlabla1996 No, any western arms compatible parts will fit.

[BorderlandAirsoft]

do you reccomend this?

[shifty2757]

@stormvsiphone3gshit I've wanted one for my AR15 for awhile and I wouldn't mind putting it on my airsoft M4 for matches every once in a while.

[shifty2757]

@stormvsiphone3gshit Just saying, putting a real Trijicon ACOG on an airsoft rifle is a pure waste of money.

[SSBlingsA7x]

Is this hard to use in combat (with only 50 rounds)

[clinclub111]

bought 2 deagles about 3 days ago from tht site

[LesBaer619]

i just got mine today. it's sweet. havrnt gotten a chance to shoot it yet. i got mine from a store here in san jose CA. for $300! :(

it has a something hop up unit haha

[wildbings]

Your room is a mess man, clean up :D The charger is always heavy , don't worry :D

[ect301fps]

Was that an agile guitar I just saw?

I'm thinking maybe I should get this gun, but mags are extremely expensive (almost $50), but since agm went out of business and these things are getting hard to find now, I was thinking that maybe later on down the road, I might sell it for a good price.

[MEU98]

Is it a good gun to get?

[abmotorkid]

where did u get this gun for 185$ i am wanting to get this gun

[armykid121]

4 da mag to take it out push up then pull it out

[JimboSlice114]

can this use we scar mags?

[airsoftnaota941]

@JimboSlice114 No, only Wa compatible mags.

[theairsoftplayer555]

how much shipping is it for the us?

[airsoftnaota941]

@theairsoftplayer555 Depends on where you live and where you buy it

[sggibson1]

@airsoftnaota941 how much was ur shipping?

[diavolasso]

@airsoftnaota941 does it ship to europe?

[USAFBlachawk]

How many rounds can u shoot before having to put more gas in??

[PrivateTomb]

The mag problem is actually like the real M4. It just fits in snugly so that it doesn't fall out.

[LesBaer619]

Oh really. I am gonna get one how much was it. Do you think it's worth it? Thanks

[narutot79]

@LesBaer619 it worth it

[LesBaer619]

@narutot79 thank, but my problem is i cannot find a place that actually has any in stock

[ImaHooka]

@LesBaer619 China clones are getting seized by the chinese government

[LesBaer619]

Good review. If you want the field strip pins to be tighter try buying some AR springs for that. And for the safety selector use real AR parts. That's what I did with my we m4 gbb. For the safety selector take off the screw in the grip and pull it out, but watch out for the detent and the detent spring, then just swith out springs. For the rear pins you need a special tool take off the buffer tube. Hope this helps.

[airsoftnaota941]

@LesBaer619 The safety detent on the WA isn't the same as a the we/Realsteel.

[TheBlabla1996]

@LesBaer619 like what kind a tools

[LesBaer619]

@TheBlabla1996 the agm is not compatible with the AR wrench, so i dont know. but for the grip is just a hex screw

[TheBlabla1996]

@LesBaer619 oke, i have fired with a real A, its a nice gun

[bkskid]

got a agm m4 gbb with a red/green dot scope wanna sell. if you want message me.

[AirsoftCalifornia]

is this a good gun? is it worth the money

[xxthehuskycaboosexx]

not really, it kinda sucks, u spend 200 hundred bucks to buy it but then about 400 hundred on everything you have to upgrade, just get a g&P woc or a WE 4168

[xXFrEzEXx1]

duz this gun take WA upgrade parts

[airsoftnaota941]

Yes this gun duz.

[briansutrisno]

how did you take off the red flashhider and what fps does this gun shoot?

[mcskatin]

When I shoot my agm gbb m4, the bbs go everywhere except what im aiming at? any tips?

[airsoftnaota941]

What type of bb's are you using?

[mcskatin]

with .12 gram, it goes far and curves a ton and with .25 gram, as soon as it comes out of the barrel it curves down towards the ground real fast.

[airsoftnaota941]

Don't use .12's, as for coming straight down with .25's. Have you adjusted the hopup?

[mcskatin]

yes and it didnt do anything. I tried it with .12's again this morning and now the .12's are not going far at all. maybe 30 feet?

[airsoftnaota941]

Don't use .12's, they will mess up you're gun. As for that you may have too much hopup on. Also the hopups in the agm are not that great

[mcskatin]

@airsoftnaota941 Well I've been playing with the hop up and tweaking it each way and it hasnt done a thing. I don't see how it does do anything cause the inner part of the hop up chamber or barrel part of it is smooth but i dont know how a hop up works to begin with.

[airsoftnaota941]

I suggest buying a new hopup, because the one it has is crap. Be prepared, this gun does need a lot of work to be reliable. And is not a gun for a beginner.

[lilvfr400boy]

this is true, it takes a few 100 rounds to break it in so it works, but i changed mine to the ra tech metal hop and changed the bolt to the ra tech steel bolt

[lilvfr400boy]

@lilvfr400boy bolt carrier sorry, my mistake

[Idn42]

Yeah it runs on propane man

[Megagunner95]

does it need a battery or not?

[airsoftnaota941]

Why would a Gas blowback gun need a battery?

[mcskatin]

your room is a mess and you have toy transformers why?

[altimer1]

those arnt transformers dumb ass get ur shit right those are mobile suits

[mcskatin]

@altimer1 what a fucking nerd!

[altimer1]

yea fuck u bitch i used to play with them when i was younger so fuck off bitch im not about to deny it u probely played with ken dolls so dont even start on me

[mcskatin]

@altimer1 what the fuck is a ken doll?!

[wybraniec007]

Internal parts are shitty in this gun . They will smash after few mags... better buy WA (it has aluminium bolt and internal parts are metal) not like in this shit all is plastic inside.Sure WA is more expensive but think about is it better to buy alerdy good gun or better to spend more money foir just the same...

[airsoftnaota941]

The internals are not plastic at all.

[1008668006]

@wybraniec007 Or go with the G&P modified guns, or even WE-Tech make some blow back M4's.  Also the quality on this gun is not bad at all for the price.

[MrErjavec]

what's the difference between GBB and AGM???

[airsoftnaota941]

What do you mean? Agm is a brand and Gbb stands for gas blowback

[123thejd]

what website will send 1 to the uk ??

[airsoftnaota941]

I have no clue

[911airsoftdude]

can the body pins come completely out

[airsoftnaota941]

They can, but have retaining pins to keep them from doing so.

[mcskatin]

yes. if you pull hard enough

[95uper]

were can i get one at like what website

[Airsoft113]

how long is the hand gaurd becuase i bught a magpul moe handguard and it didnt fit on my echo m4? and does the stock have to be real steal to fit?

[airsoftnaota941]

I don't know. And no they don't have to be real steel to fit.

[A5tila]

Whitch type of mag do you use becaulse i don't understand when you're saying in the video?

[airsoftnaota941]

The mag in the video is the standard AGM mag, I used GHK but any mag made for the Western arms system will work.

[airsoftowns233]

oh sorry for double posting, but does propane work? does it affect anything

[poikuli]

Propane works. It's that what everyone uses.

[airsoftowns233]

just to help, for the mag to be easier to get out push the mag up and THEN out, it makes it easier.

[RXillusionist]

suckish gun. must fix some parts before usable.

[airsoftnaota941]

Must fix A LOT of parts before usable.

[gfinn08]

im just a casual airsoft shooter

like maybe 1 private skirmish and mostly target shooting when i can (like every 2 weeks)

can i just leave the parts in the gun until they need to be changed or if i have to change parts, which ones do i change

[ApolloISO]

list of things youll need to do :

change nozzel, hopup, bolt catch, and mag. those are the major ones.

[xXSAM1TCH22Xx]

I wish you didnt tell me that the selector switch came out.. i guess i didnt hear u say "be careful" bc i took it and and cant get it back in... hehe.. do you know how to put it back in and it functional?

[Arzual]

dude... clean up :O also heavy magazines (700gramms) are not heavy at all, full loaded m4 has, at least, some weight. You should be happy that you dont have to carry a Star AW-338 ;) THIS bitch is heavy.

But for 4 minutes nice review

[rabz777]

Is it accurate cause i know the recent wa we are crap for hop up systems.

[airsoftplaya1234]

is this a good replica of a m4. just for the looks not the shooting

[nolefan4life38]

how did you get the orange tip off. i got mine from ehobby to and they glued mine on

[Jesusmcjimmy]

The lack of trademarks is ghastly...

[airsoftnaota941]

The lack of caring is immense.

[mvrmvp]

lol

[r33skyline4life]

hahah you joker

[m3ean]

how much does the magazine holds??

[CenturyChild1102]

HI, is the gbb functional or just show?

[nolefan4life38]

does it always come with a black flashihder?

[Aurelia249]

In US no, but in hongkong yes.

[kimbolaia]

and most europe countries exept the UK, atleast Scandinavian ones do :3

[viettkid15]

is this gun sti9ll working for you?

[redneckMarine0]

wow im getting my from ehobby for 106$

[HonkeyandBeanerBoy]

hey dont worry about the mag stick its normaly (on real m4s) supposed to have a good grip on it so DONT file the sides the Streams inside the body as you probably know are ment to hold the mag so filing those down would losen it but after you use it for a while it should losen up, but sweet gun :)

[pingpong909]

ermm not normal. I own a REALSTEEL.. Stag/CMMG ar-15 (Milspec) and have no mag stick whatsoever.

I used Magpul P-mags (new and old.. window and non window.. tan n black... SS spring and Silicon spring), USGI mags, C-products, L-5.. they all go in smoothly with no stick and come off with no stick.

[NeWsOuNdRaVe]

stick with the tokyo marui, all gbb need upgrading to make reliable

[airsoftnaota941]

Hence why I keep the Tm and upgrade the GBB on the side.

[SHUNT311]

I wonder how much that mag weighs? my real m4 mag weighs over a pound with 30rds.

[airsoftnaota941]

The Original AGM mag is about 2 or 3 pounds. My GHK mags are much much lighter.

[SHUNT311]

Has it broke? Is it a good gun? I got the we scar-l black gbb. Im getting one of these next for $140.00 shipped. good job man!

[airsoftnaota941]

About all the internals broke, I'm pretty much replacing all the internals.

[SHUNT311]

damn they broke? what broke? do you think I should take the chance?

[airsoftnaota941]

Basically the entire bolt assembly is broken, and the hopup broke. All parts that need to be replaced anyway. If you are going to upgrade the gun then it'll be good. But in stock form it's not all that great.

[SHUNT311]

Thanks man, that sucks. Good luck!

[CRC1770]

What scope is that on the TM M4 ?

[airsoftnaota941]

It's a guarder red dot ACOG replica.

[CRC1770]

Thanks.

[ThePurcy]

magazine weighs around a kilo same as if it was fully loaded ish

[gyhighway]

Thats a mad nice gun. would I be able to throw a full stock and an m16 barrel? Would it work with WA barrel and stock?

[airsoftnaota941]

It's a copy or the WA gun, so WA parts will fit. But apparently the stock threading on the body is different so you might have to get a new body as well.

[hugetird]

oh and nice gun

[hugetird]

omg is that your room its soo messy

[Merceinarie080]

Lube the mag chamber

[CRC1770]

So can you give me a list of parts that you think I will need please.

[airsoftnaota941]

A new hopup, bolt stop, and a new bolt assembly and nozzle. Like the Ra tech NPAS.

[CRC1770]

Ok thanks.

[CRC1770]

Do you think you will need to get a new Bolt ?

[airsoftnaota941]

Yes, my bolt is already broken.

[nakazatoGTR]

ur room just looks like my room...

bbs and clutter all around.

guess am a real dude too..

[sk8er4life123456]

Evike is based out of san gabriel california. The Team im on is sponsored and we raffle stuff over every 1st sunday at SC Village in Chino Our team is Outlawz come play and have fun

[airbornghost123]

is ehobbyasia safe to buy cause theres another honk kong base retailer called evike so which should i go for ehobbyasia or evike

[buckman2011]

I though evike was american. Evike is really good. I bought a lot of shit there. very safe.

[airsoftnaota941]

Evike is a American retailer. As for ehobby being good, I had no problems ordering from there.

[flipdog69xxx]

hello I'm also planning on picking this same gun up (RIS version) from ehobbyasia. Are you having any problems with the hop up and/or bolt stop? I hear those are the parts that go out first with this brand M4 GBBR.

[airsoftnaota941]

Yes, both of mine have broken. I suggest getting a metal hopup and a new bolt stop.

[ps3Razorking]

I dont have this gun yet but does anyone know how to downgrade this gun to 300fps ?

[sk8er4life123456]

Use different Gas like HFC 134a

[ps3Razorking]

kl thanks do u think it will do 300fps on 134a ?

[sk8er4life123456]

It also depends on temperature

[GerardCB777]

hey wat do u think ur doin in this video =D

[sk8er4life123456]

I Want one to! $115 full metal GBB M4 R.I.S. Of course im getting it and upgrading it!

[GerardCB777]

shipping is krazy. its suppose to b only 110$ wtf.

[airsoftnaota941]

It's coming from over seas. Still cheaper than buying it at the only US store that has it.

[sk8er4life123456]

Its coming from Hong Kong and it only took like 36 hours. what do you expect?

[AzonaDbacks12]

my selector switch is really stiff from semi to auto and semi to safe how can i fix that

[airsoftnaota941]

Check the spring and pin that hold the switch in, cut off a coil or 2 if needed.

[SpecOps3145]

Nice review. I've notice with mine, before my stock mag took a crap on me after the 2nd fill, that cooldown was a big problem with the stock mag. I notice that if you fired the gun on semi-auto as fast as you can pull the trigger, you notice a decress in range. Same goes with firing a burst of 5 or more shots on full-auto. Have you tried other brands of mags and if so, which have performed better and show less effects of cooldown, if any at all?.

I'm thinking of trying the GHK mags.

[airsoftnaota941]

I have 5 GHK mags, and the cooldown is still there. But it isn't as bad as the stock agm is. I can empty about a full mag before it cools down.

[TheFatAssCat]

How good is the quality of these? I know AGM makes solid electric rifles but I havent a clue about their GBB series. And will it take protane? Cause it would seem to be a gas hog...

[airsoftnaota941]

It is Ok for someone who knows GBB rifles, it needs work to make it reliable. And yes it runs off propane.

[TehLilAzn47]

pure propane? or propane with silicon oil

propane with silicone oil