FF-117 Part 1 (F-117 Stealth Fighter Inspired RC Plane)

[Tebergenc]

tnks for al pdf plans

[mpetty0226]

Pretty sweet build Pauly. Thats probably the coolest one yet. Looks like a lot of Geometrical calculations went into putting that one together. You'd better be careful, or lockheed will come after you for copywrite infringement. Lol. Cant wait to see her fly.

[richardwebb2112]

rcpowers did it first and better

[rcFoamFighters]

Thanks for the comment. Dave powers is a good guy and his F-117 looks pretty cool. I have never built one but sure it flies good. I am just building my interpetation of the F-117 mostly because I like the challenge to come up with a design on my own. Also I've had several viewers request that I make a foamboard F-117. Just like our FF-22, other people have their own designs. I think the funest part of scratchbuilding is to challenge your mind and make a design on your own.

[beyeriii]

Hello RC Foam Fighters,

Please elaborate on the type of foam used to build your F-117.

I think the video says "Elmers Foamboard". Is this 3/16" Elmers (Hunt) "Sturdy Board" foamboard?

If it is, you might consider using Elmers Black on Black (PN 901120 or 901121) to avoid having to color the F-117.

From what I read, this foamboard has a layer of paper glued to its surface. Do you use it with the paper attached or do you remove the paper??

TIA,

Keller Beyer

[rcFoamFighters]

Thanks Beyerii! It is the elmers Foamboard, 3/16. We leave the paper on as it makes a stronger model. A bit heavier, but with the right motor and enough power it is not a problem. I did use the Black foamboard, but we usually tape it to help protect against moisture and also adds a bit of strength. I'm sure you could make the model and not tape it too, but will be more apt to get wet and warped. thanks again.

[beyeriii]

Thanks RC Foam Fighters for the information about Elmers foamboard.

Please also tell us what type of tape and how wide of tape you use to cover the Elmers foamboard.

Do you also use an iron to help the tape bond? Perhaps an iron doesn't help much because of the paper coating?

Thanks again,

Keller Beyer

[rcFoamFighters]

Keller,

The tape we use is 2 inches wide. it is just colored packing or sealing tape. its kind of hard to find in stores, i usually order online from Tape Brothers or Amazon. there are links on our Blog too if you can not find it. As for the iron, we usually don't need it when using foamboard. It sticks to the paper on the foamboard pretty good. Sometimes i will use a heat gun to shrink the tape a little if i have wrinkles. Thanks again

[beyeriii]

Hi Paul,

What type of adhesive do you recommend for use with the Elmer's Foamboard?

I hope the test flights go well, I am looking forward to your plans for the FF-117.

Thanks,

Keller

[rcFoamFighters]

Keller,

Usually I use a Hot Glue gun when working with Foamboard. it seems to work pretty good and is nice a low cost.

As for the FF-117, I have the new one already built, now I'm just waiting for warmer weather. its been super cold here the last few weeks. Actually below the rated temperture range for my spectrum receivers. But hopefully soon we can get out and test it. Thanks again!

[beyeriii]

Hi Paul,

What do you think about spray painting the foam board instead of using colored tape?

Do you thing the wet spray paint would cause the foam board to warp?

If it would not warp, would the paint be enough to protect agains moisture?

Also how much strength does the tape add to the foam board?

Thanks for your help,

Keller

[Ruby1230]

That is purely awesome, I've been away for a bit and I see you guys been busy. Can't wait to see the flight video

[rcFoamFighters]

Thanks Ruby1230! We have been a bit busy, LOL. Hoping to get the FF-117 dialed in and flying soon.

[gripchion]

I can't wait to build the FF 117 thanks for the vids and plans. Keep up the good work.

[rcFoamFighters]

Thanks gripchion! once I get the design tested and dialed in i will make the plans available for free. Thanks!

[bratstarr]

hav a good 1 and dont 4get 2 ask UR viewers 2 subscribe cuz I want longer vids

sorry i mean WE want longer vids

[rcFoamFighters]

Thanks bratstarr! I appreciate your awesome support!

[jacquesone100]

a very Merry Christmas bro!  the plane is lookin' snug!!!

Jacques

[rcFoamFighters]

Thanks Jacques. Hope to get the new one in the air again soon.

[xwingfan]

great version of the f-117,best of luck for the maiden flight.when the free planes comes available i´ll be building my own for sure.

[rcFoamFighters]

Thanks xwingfan. My first maiden didn't go to well. The bad weather and high wind was not a good place to test it, LOL. please see the video.

Thanks!

[wingyip]

merry x- mas.... ^^

[rcFoamFighters]

Thanks wingyip! Merry Christmas and happy Holidays to you too!

[urmommawasfun]

were do you buy ur mesh tape?

[rcFoamFighters]

You can get the 3M cross weave strapping tape at Target stores and I think Lowes stores carry it too. its a little pricey, but I like it the best for using when you want to make tape hinges or other secure taping. You don't have to use it, you can also use regular strapping tape too. Thanks for thecomment and watching!

[twanna44]

u guys should give away some planes for give aways

[rcFoamFighters]

Thanks for the comment twanna44.We may give some planes away in the future. Most of the time though, we want to give things away that will be easier to ship since we have freinds and viewers from all parts of the world. Thanks for the input and for watching rcfoamfighters!

[daveyedgar]

very impressive build man!!

[rcFoamFighters]

Thanks daveyedgar! Hoping the snow will stop here so I can go test Fly it. Thanks for Watching!

[rcFoamFighters]

Thanks George! I hope you have a good Christmas and all is good for you there in Romania! Haven't heard from you in a little while, I hope you are still happy and Flying at your Cool spot on the hill. Thanks again!

[SEBratt]

Lookin good Paul! I bet she will fly great! Congrats to the new members of the group too! Can't wait to see their builds!

[rcFoamFighters]

Thanks SEBratt for watching and your support of the new members. We are all hoping to be more active and share more ideas in the coming year. So please stay tuned. I hope the FF-117 flys good too. Thanks again!

[GRS15720]

Hi Paul,

did you have any trouble finding the CG on the F117?

[rcFoamFighters]

Thanks for the comment GRS15720. The CG I still have to test and make sure its accurate. I won't know for sure till I can do the maiden flight. The estimated CG was found by doing glide tests with my two Mock up models I made. I will use what seemed to work on the full size mock up, about 16 inches from the nose. After I get it maidened I can make any, hopefully fine tuning adjustments. Thanks again for watching!

[remotecontrolaholic]

that plane is looking great! love the gloss paint job. looking forward to seeing it fly.

Merry christmas eve!

[rcFoamFighters]

Thanks remotecontrolaholic! I really like the Black tape covering too, it makes it look nice and clean. Hope to fly it soon if the weather would just clear up, LOL. Have a great Christmas!

[BRANDORC]

That thing looks so mean. I love it. And you even have your name on the cockpit. I love how free flowing it is on the inside and the fact that there is no need for carbon. The profile of that thing is just soooo sleek. Glad to see Ken on the team.

[FlyHighRC386]

hey there teammate nice to now there are new vids coming soon. Missed your channel

[rcFoamFighters]

Thanks Brando and formally welcome too the team, though we considered you on the team from way back. Really looking forward to your new designs. That plane looks crazy! So does the drawing of the other one you sent. Hope they both work out good for you. Can't wait to see them Fly! I hope you and your family have a great Christmas!

[FlyHighRC386]

hey paul love it it looks awesome my ff-18 is also done a vid will be very sooon 5*

[rcFoamFighters]

Thanks Mikey! Your F-18 looks like it is coming out good too. Be neat to see how it flies.

[Tony28337]

How do you get that tape so smooth?

[rcFoamFighters]

Tony, thanks for watching. The tape goes on pretty easy on the foamboard. The surface is nice and smooth already, so if you take your time and lay it out it goes on pretty good. Thanks again!

[flyby8906]

Wow looks great Paul as always you two got it down. Can't waite for the maiden looks like it is really going to be sweet in the sky. Have a Merry Christmas and a Happy New Years to you and Frank and all your family Gregg

[rcFoamFighters]

Thanks for the comment Gregg and welcome formally to the Team. I hope you and your Family have a great Christmas too!