What? With all the respect, but there is nooo way that release of Robert's is able to create more revs than Belmo or Osku!! No way!! So why does the article on wikipedia say so? Someone please tell me!!
@jaitock1991 Because wikipedia is written by people who don't always know what they're talking about...Belmo and Osku rip through the ball with probably a good 150-200 more revs than Robert
@MrThinroyy In typical shots, Belmo, Osku and Robert have about the same rev rate which is 550-650rpms. Robert can bring it up to 700+ at highest but Belmo once threw a 1200rpm shot. Don't know about Osku though, he seems to prefer more ball speed with lower revs and throw it kinda straight.
it's funny how almost all the advice i've seen lately says something about keeping the wrist straight, but i clearly see a snapping of the wrist with mr. smith here. interesting to see the difference between words and actions here.
Mike Fagan does indeed use sarge Easter. A good two inches worth of it. Robert Smith has gone in between conventional and sarge Easter multiple times. However currently he is using conventional, in combination with lengthy drillings.
He has an excellent release almost the same as Wes's. He does not have a unconventional drill type. It's a plain ole fingertip ball drilled to him, first knuckle on both fingers. He does bend his elbow on the down swing, but if you you look at all the crankers they all do it. It's to max the rev's. But if you look at the elbow at release it's straight again. ..... Love the videos! Keep them coming. Thanks .
@MuteOrators you do know he uses a drill setup that isnt conventional? I dont know what it's called, but i think he puts his middle finger in up to second knuckle, and ring finger to first knuckle. That's how he generates so much rpm
@iwasadeum Actually that is how he slows down his RPM. The drilling is called Sarge Easter. It's where the ring finger is an inch or so lower than the middle finger. It allows him to take some lift out his release, but maintain his amount of cup and hand. Sarge Easter is used by almost all crankers except for tommy jones and wes malott. Check out a ball drilled by Mike Fagan or Robert Smith, they're the same, although mike fagans ring finger is almost 2 inches lower.
@SuperTeremus Yeah, im a new bowler so i didnt know much about Sarge Easter, but then i was watching a match with Michael Fagan ( i believe he also uses Sarge Easter?) and the commentors said something about the grip slows down his RPM. Has robert smith gone conventional though? The last few years i've watched on youtube of him bowling he seems to have gone to the conventional finger-tip drilling.
great video very nice camera work robert smith great guy i met him like a week ago here in vegas for TOC tourny very friendly very fast small elbow bend all the way working inside the ball and just uncup and snap at the bottom crazy rev rate I hope he wins more fantastic bowler
I know how he revs da ball n by seeing it slow mo wont do any gd if anybody wants 2 learn his style...revs is not a prob but ball speed requires strength n stamina.
It really looks like something anyone could do but believe me it is quite difficult. It requires a strong wrist, great timing and a loose armswing.
royplayer 6 months ago
He does have more revs, but not like he use to. Bak in the day he had more revs than any 1 hander or 2 hander
114sasquatch 6 months ago
What? With all the respect, but there is nooo way that release of Robert's is able to create more revs than Belmo or Osku!! No way!! So why does the article on wikipedia say so? Someone please tell me!!
jaitock1991 7 months ago
@jaitock1991 Because wikipedia is written by people who don't always know what they're talking about...Belmo and Osku rip through the ball with probably a good 150-200 more revs than Robert
MrThinroyy 1 month ago
@MrThinroyy In typical shots, Belmo, Osku and Robert have about the same rev rate which is 550-650rpms. Robert can bring it up to 700+ at highest but Belmo once threw a 1200rpm shot. Don't know about Osku though, he seems to prefer more ball speed with lower revs and throw it kinda straight.
UltimateWWEPro 1 month ago
it's funny how almost all the advice i've seen lately says something about keeping the wrist straight, but i clearly see a snapping of the wrist with mr. smith here. interesting to see the difference between words and actions here.
MrPs103 8 months ago
Mike Fagan does indeed use sarge Easter. A good two inches worth of it. Robert Smith has gone in between conventional and sarge Easter multiple times. However currently he is using conventional, in combination with lengthy drillings.
SuperTeremus 9 months ago
He has an excellent release almost the same as Wes's. He does not have a unconventional drill type. It's a plain ole fingertip ball drilled to him, first knuckle on both fingers. He does bend his elbow on the down swing, but if you you look at all the crankers they all do it. It's to max the rev's. But if you look at the elbow at release it's straight again. ..... Love the videos! Keep them coming. Thanks .
mrsabine111 9 months ago
When it comes to raw power, Robert Smith will give any 2 hander a run for their money. I always thought he was the worlds most powerful bowler.
Astromchaser 10 months ago
thanks for the vid! keep um coming!
wudupnigga808 11 months ago
Waited for this image; served as a reference very much
MrBowlingfighter 1 year ago
no matter how many times i watch slomo robert smith, i cant bowl like him...maybe i should try practicing...
MuteOrators 1 year ago 3
@MuteOrators you do know he uses a drill setup that isnt conventional? I dont know what it's called, but i think he puts his middle finger in up to second knuckle, and ring finger to first knuckle. That's how he generates so much rpm
iwasadeum 10 months ago
@iwasadeum Actually that is how he slows down his RPM. The drilling is called Sarge Easter. It's where the ring finger is an inch or so lower than the middle finger. It allows him to take some lift out his release, but maintain his amount of cup and hand. Sarge Easter is used by almost all crankers except for tommy jones and wes malott. Check out a ball drilled by Mike Fagan or Robert Smith, they're the same, although mike fagans ring finger is almost 2 inches lower.
SuperTeremus 9 months ago
@SuperTeremus Yeah, im a new bowler so i didnt know much about Sarge Easter, but then i was watching a match with Michael Fagan ( i believe he also uses Sarge Easter?) and the commentors said something about the grip slows down his RPM. Has robert smith gone conventional though? The last few years i've watched on youtube of him bowling he seems to have gone to the conventional finger-tip drilling.
iwasadeum 9 months ago
Does he have a bent elbow going into the release??
damastadj94 1 year ago
great release... i wish i can meet RS!
manmac82 1 year ago
lol seems to me he is usin the roto grip mars
thanoobsowne 1 year ago
@thanoobsowne -mutant cell actually
zimgir99 11 months ago
great form!!!
JCHONDA2NR 1 year ago
wow that bowling alley looks sick as F*ck,
armoredcore671 1 year ago
excellent video, thanks for sharing
asoeng 1 year ago
nice video man, anyone know what ball he was using?
jonglifunchow 1 year ago
@jonglifunchow He was using the Mutant Cell.
gfx2006 1 year ago
great video very nice camera work robert smith great guy i met him like a week ago here in vegas for TOC tourny very friendly very fast small elbow bend all the way working inside the ball and just uncup and snap at the bottom crazy rev rate I hope he wins more fantastic bowler
iWiLlOwNu82 2 years ago
jesus christ dude, use a period next time.
strongsock 1 year ago 6
I know how he revs da ball n by seeing it slow mo wont do any gd if anybody wants 2 learn his style...revs is not a prob but ball speed requires strength n stamina.
80gerardtan 2 years ago
superhuman is all i have to say
svstar34 2 years ago