It's a Maxi Joker with Copterworks frame conversion and gimbal. 1000.- euros for the airframe (you will need to add the motor, controller, radio, blades etc.) so let's say another 1500.- euros for that. The gimbal is around $3000 and the Joker conversion about $2500 - if it is still available.
It will carry a 2-3 kg camera for about six minutes before it has to come down to change the giant 12s LiPo packs. So, add 1500.- euros for enough LiPo's and chargers to last for a day's flying. €8000.-
I meant it LOOKS like a Maxi-Joker with a Copterworks conversion & Camera Mount. Whatever, it seems to be stable. Have you any video results yet? The Copterworks-Jokers have a bit of a vibration problem.
no problem. Yes. with any maxi joker 2 head @ this payload and RPM you get a asymetric rotating weight and many vibration problem -> and a big boooom.......
awsome, did you build this or does it come as a kit ? or is it a modified chopper , i would like to make something the same . what gear are you useing ?
RC helis are absolete for shooting, too expensive, too dangerous. Now octocopters Rulz
dramida 2 months ago
@dramida I know i have one. this is a old video.
serveurperso 2 months ago
Hi hows this project comming on and are you still flying any fpv?
Regards Liam.
liamandchad 1 year ago
It's a Maxi Joker with Copterworks frame conversion and gimbal. 1000.- euros for the airframe (you will need to add the motor, controller, radio, blades etc.) so let's say another 1500.- euros for that. The gimbal is around $3000 and the Joker conversion about $2500 - if it is still available.
It will carry a 2-3 kg camera for about six minutes before it has to come down to change the giant 12s LiPo packs. So, add 1500.- euros for enough LiPo's and chargers to last for a day's flying. €8000.-
mombasaflash 1 year ago
It's not a minicopter maxi joker rotor head and it's a 12mm main shaft;)
serveurperso 1 year ago
Ooops, my mistake. No offence.
I meant it LOOKS like a Maxi-Joker with a Copterworks conversion & Camera Mount. Whatever, it seems to be stable. Have you any video results yet? The Copterworks-Jokers have a bit of a vibration problem.
mombasaflash 1 year ago
no problem. Yes. with any maxi joker 2 head @ this payload and RPM you get a asymetric rotating weight and many vibration problem -> and a big boooom.......
serveurperso 1 year ago
So have you stuck a custom head into a Joker frame? I should have realised before. The black anodised Rotorhead is not Minicopter !
Looking forward to seeing your (good!) video results.
mombasaflash 1 year ago
And then, how about the flight time?
How much the battery last?
BCPCX 1 year ago
cost?
DoNotuseEbid 1 year ago
awsome, did you build this or does it come as a kit ? or is it a modified chopper , i would like to make something the same . what gear are you useing ?
skags2 2 years ago
what side is it? 500, 600 heli?
BCPCX 2 years ago
Rotor is 1.80 metter it's bigger than a 700 heli. weight is 13Kg with camera.
serveurperso 2 years ago
Oh nice, looks smaller on screen. Pretty good equipment ; )
BCPCX 2 years ago
what helicopter is this?
11039078 1 year ago
Looking good, nice platform for a cam
Steve
HeliEye 2 years ago
BigBoy! hope to see some crazy video from that one! looks fast!
k6lsn 2 years ago
hé bien !! sa change du 250 ^^
tu vas te mettre à ton compte pour faire de la prise de vue?
c'est quoi comme format ton hélicam?
nautler1 2 years ago
1M80 pour 13Kg avec camera !
serveurperso 2 years ago
vivement les 1er prises de vue ;)
nautler1 2 years ago
baadass
looks stable as fuck aswell
eatingjif 2 years ago
Impressive! I hope we'll be able to see some awsome photos in the future.
vialazarus 2 years ago
Very nice. I knew you were up to something with no new videos being uploaded lately! ;-)
videoguy837 2 years ago
Very nice! is there any chance you could in your next video show the size of it compared to a person it seems huge!
flyingfutaba 2 years ago
Nice!
Did you build the camera platform yourself or did you buy it?
carlosthecactus 2 years ago