i dont really remember, just watch the video & try and find the piece that has the smaller part sticking out at a 45degree angle. it should say how big it is, then get that width of pvc, just a little, then get the matching end cap.
It might be because your using too much hairspray or whatever you're using. Its happened to me before it has to have a right mixture of fuel (hairspray) and air. use less hairspray, and if that doesn't work, then it is your lighter. Get a new one, and make the screws an inch apart so the spark has a good arch. hope this helps
how do you attatch the lighter to the PVC and where did it come from, if you know what i mean, how did u get it out of the bbq lighter to be like that
No, u buy it like that, at the hardware store, you can buy a BBQ ignighter by itself. and i taped it tightly to the handle, the wires are ran through the holes i drilled and held in by the screws & thats where the spark is, in between the screws
never knew that potato cannons were so hardcore! hahaha. potato cannon and rock! great combo
thepineapple1 2 years ago
working?
lepa98 2 years ago
whatt is the deminsion of the other stuff you added??
michaelgoober 2 years ago
i dont really remember, just watch the video & try and find the piece that has the smaller part sticking out at a 45degree angle. it should say how big it is, then get that width of pvc, just a little, then get the matching end cap.
u00drk1 2 years ago
i made a spud gun but it dosent fire do u have any ideas why not
(has spark but not much) just a barbe lighter
yoyostefan 2 years ago
It might be because your using too much hairspray or whatever you're using. Its happened to me before it has to have a right mixture of fuel (hairspray) and air. use less hairspray, and if that doesn't work, then it is your lighter. Get a new one, and make the screws an inch apart so the spark has a good arch. hope this helps
u00drk1 2 years ago
where do you get the bbq lighter?
melsomMD023 2 years ago
at the hardware store, i got everything i needed at Lowe's
u00drk1 2 years ago
how do you attatch the lighter to the PVC and where did it come from, if you know what i mean, how did u get it out of the bbq lighter to be like that
JakeD136 2 years ago
No, u buy it like that, at the hardware store, you can buy a BBQ ignighter by itself. and i taped it tightly to the handle, the wires are ran through the holes i drilled and held in by the screws & thats where the spark is, in between the screws
u00drk1 2 years ago
Intro song please :3
BurntMetal 2 years ago
its "As the sleeper awakes" by Soilwork
u00drk1 2 years ago
I knew it was Soilwork! Thanks dude.
BurntMetal 2 years ago
no problem
u00drk1 2 years ago
why do you juse a bbq igniter ? why not just a lighter whit long front?
gewoondragon 3 years ago
because its easier to connect a BBQ igniter with wires, than to stick a lighter in through a hole. it works easier & better with a BBQ igniter
u00drk1 3 years ago
And what do u dse for the what makes it shoot out like gun powder?
polkakinga 3 years ago
you use any flammable aerosol spray, aerosol hairspray works the best. some people even use AXE body spray.
u00drk1 3 years ago
Waht do use for the glueing?
polkakinga 3 years ago
the purple stuff is a primer... it makes it stick tighter, & the glue is called PVC cement, its clear.
u00drk1 3 years ago
what do you use fore ignite?
Proffs15 3 years ago
a BBQ igniter
u00drk1 3 years ago
who cares if its snowing!! Shoot snowballs with it!!!
sstryker93 3 years ago
hahah, that wouldn't work! ice balls maybe.
u00drk1 3 years ago
ice balls would DEFINATLY work...just type in ice ball potato cannon...
sstryker93 3 years ago