Just installed the H13 BiXenon HID kit into my 2010 f-150. I can't get my high beams to work, when I wire into the relay just my high beams come on and I can't turn them off? I can only get low beams, my cutoff line is good on my passenger side but there is no cutoff line on the driver side? It looks like the high beam is on and oncoming drivers are getting blinded. What is going on? I'm totally lost.
hey im about to get some hid lights i have a 2004 gtp do i need the capacitor or no?? please respond i don't want to like get something that well i will need to get more parts for it so yea thanks...
I installed my hid kit today on my Chrysler 300c , and at first i plugged the headlight plug to my kit but it was "POSITIVE 2 NEGATIVE" and after i figured out why the light wouldn't go on , i then unplugged and plugged correctly ''POSITIVE 2 POSITIVE" but now that side that I did wrong doesn't look as bright as the other side that was plugged correctly ... did i damage the bulb or ballast ??? or is it that i had the side that was done correctly running for longer ... thanks for posting this vid
@SPCHILLIN718 Hello, there is a chance you might have damaged the parts when you incorrectly installed them. Have you tried swapping the bulbs from one side to the other and seeing if there is any difference?
@StealthAuto I actually changed the color bulbs and after that was done, one side still seemed brighter ... at night I noticed one side was brighter on the ground ... I think my headlights (projectors) aren't positioned the same ! Sorry for responding so late , thanks again !
I have a 11 honda civic lx..i recently got a xentec kit and everything works fine and it looks great but i have a small flicker problem..any idea if i need to get just the anti flicker kit or something else?
@willyyhoo what is the exact issue, can you explain in detail the issue you are having? depending on your issue the anti flicker capacitors can help you, we will just need to know a little bit more in order to be able to help.
@StealthAuto It turns on and off fine the light stays on but it just flickers like the light looks like it's moving up and down.I tried taking the daytime light fuse out and that doesn't fix anything.
@Dchristian100 for most vehicles you will not need a relay, however there are some Dodges and other specific vehicles that might need a few additional pieces to help stop flickering.
My left hid do not work properly. sometimes it turns on without trouble but sometimes my left HID doesn't turn on at all. it does not flicker when its on.
can you help? what is the problem? and what can i do to fix this problem.
@taeho85 My guess would be that you have a defective ballast and it needs to be replaced. If only one side is having and issue and flickering then it is usually the components on that side and not the vehicle itself.
always turns off. If I turn all the lights off and then on again with the car still off, the same fog light remains off. I have to power the engine on to get them to function normally. I know with certainty both the ballast and the bulbs are fresh. My question is; Are cancellers the thing i need to ensure that all my HIDs turn on flawlessly?; with out ANY type of flickering or failure to turn on on demand?
@TBN14TC The issue you are having will not be fixed by our anti flicker capacitors, I would suggest you go to a shop and have them check it out for you. This is not something we can diagnose over the internet. The vehicle needs to be checked and tested to see where the issue is coming from.
Hey man I have a 2003 Nissan Altima. I've been using HIDs for a little over a year now. This last August I bought some fog lights with HIDs. For the past several months I've noticed strange behavior with the fog light HIDs. For example when I remote start my car (all parking lights flash 1 & then twice when I unlock the car) one fog light blinks normally with out any problems while the other may flicker. All 4 HIDs usually work well when the car is on. However if the car is off one fog light
@lasthumain Hey, For your Xc90 you will need a H11 bulb for the low beam, we carry that bulb and full kit. give us a call or go onto our site to check it out.
Hi. I have a 2000 Honda Civic LX. I bought H4 6000K Xenon bulbs plug and play. Now I know one thing for sure that it has never came with any kind of kit, so is that ok? Or am I missing something with the bulbs? They are not working I have no idea why. Maybe you guys could help me with the wiring of them? Or I just have to buy the kit?
@omaralbasri1 did you just buy bulbs or a whole kit? Do the items that you have look like the ones we are showing in the video? If you bought a full kit and as long as you hook it up correctly they should work, you should not need any extra wiring kits or capacitors to make it work.
Hello I have a 2005 Chrysler300 and I recently install a 55w hid kit and they are flickering hope you can help me what to do!! Thanks and god bless you!!
@elmalcriado777 Hello, we do not sell 55W kits because they usually cause issues, we only sell the 35w kits and unfortunately our anti-flicker capacitors only work on the 35w kits. I would suggest contacting the company you bought the kit from and asking them what they recommend.
i have a full head light of a Silverado 2500HD, the car was totaled, i would like to make us of the headlight but i need to know what parts do i need to make it work, and do i need to connect it to a car battery? please help me bring the light back to life. btw it is not for car use, just a project i thought of making.
@DoctorAbadi Hello, I am a bit confused with what you are asking, you will need to give the headlight power, and if its not going to be in the car you will have to find some external way to power it. If the headlight was still in the car you would just need to plug the stock headlight socket into the HID kit...
@stealthauto . Thanks for the help. I was thinking about installing it on my 1973 AMC hornet. I have to mod the light sockets but should work. Thanks again
@SuperHawaiian93 It's a anti flicker capacitor, if your headlights start flickering or giving errors on your dash you can install these and they will get rid of those issues.
Hi .. i wonna ask if any of those cables go to the batery or xenon dont have work with the batery? beacouse i have mercedes c from 1998 and the batery is in the back and will be hard to install....thanks
@ivicazpopo These kits do not need to be hooked up to the battery of the vehicle, they only need to be connected to the socket that was originally connected to your stock headlight bulb.
@ironass08 Hello, With the newer vehicles we always recommend purchasing the Anti-Flicker capacitors, and if you end up not needing them you can always return them for a full refund, we do not charge restocking fee's.
2011 ford fusion, got a small flickering problem and occasional radio static, also I was driving and one side shut off and the other side worked perfectly, put both on after I got out of the store the opposite one that was working before shut off and the one that wasn't working before was working okay, shut both off again and both are on no problem, what could it be? Ballast or rainy weather, I'm not sure, thanks.
@V8AmericanMuscle I would think its probably a ballast issue, typically if its a computer problem it will cut power to both lights and flicker them both at the same time. I would try swapping the ballast from one side to another, I know you said that both sides exhibited the same problem but just see if it helps.
@V8AmericanMuscle My opinion would be that the ballast are most probably faulty. Also if you are seeing issues like this only on rainy days there is something wrong, your entire system should be waterproof and it should not allow water to get into the wiring harness.
HELP HELP A.S.A.P. i plug in my hid kit on my 04 explorer and didn't turn on then took them back on to my 04 tahoe and they do work, what am i doing wrong? HELP PLEASE?? (monk3y_0809@live.com)
@monk3y0809 did you make sure the polarity on the plugs is correct? Some cars have their pos and neg switched on the plug. You can try to flip the socket going from your vehicle to the ballast 180 degrees. Do not try this with anti flicker capacitors you will damage them.
hey, help! so i installed HID kit on my honda civic 2012 lx model. the passenger HID light stays on but then turns off later. The driver one doesnt turn on all the time when i turn the headlights on. it does go on for like 1 second then turns off. if it does turn on itll flicker then turn off. HELP!
@markieezsn145 do you have anti flicker capacitors installed? If its a flicker issue both lights should exhibit the same problem at the same frequency, if the lights come on and go off at different times you could have a bad pair of ballasts.
@ ironmaidx - Factory Xenon's are the same as HID's so if you already have xenon's then you already have the upgrade. If you wanted to upgrade your fog lights or high beams then yes you would do it this same way
@ ironmaidx - Factory Xenon's are the same as HID's so if you already have xenon's then you already have the upgrade. If you wanted to upgrade your fog lights or high beams then yes you would do it this same way
Basically if your vehicle's harness fits directly onto the canceller then you would NOT used the extra harness and two wires that come out of the bulb correct?
Your explanation was perfect.. it's help me a lot.. thank you grat job :)
veselic1993 1 week ago
Are xenons the same as bi-xenons ? but bi-xenon have a auto level system on the headlight ? cause ppl say xenons blind oncoming drivers.
iM3E46 1 week ago
2 ppl like Halogen yellow lights lol
iM3E46 1 week ago
Just installed the H13 BiXenon HID kit into my 2010 f-150. I can't get my high beams to work, when I wire into the relay just my high beams come on and I can't turn them off? I can only get low beams, my cutoff line is good on my passenger side but there is no cutoff line on the driver side? It looks like the high beam is on and oncoming drivers are getting blinded. What is going on? I'm totally lost.
MegaRichWhite 2 weeks ago
hey im about to get some hid lights i have a 2004 gtp do i need the capacitor or no?? please respond i don't want to like get something that well i will need to get more parts for it so yea thanks...
rafaelborja891 3 weeks ago
I got the same kit, but what do you do if you wana place it on a scooter?
cuz of the scooter lights is too bad, i looks silly when i dont need to turn of the fog lights... -.-
and it's also more silly when the cars don't tun of the fog lights in the dark and just drive..
I just use to tunr the whole lights of if they do ;D
disturbedlol 1 month ago
I installed my hid kit today on my Chrysler 300c , and at first i plugged the headlight plug to my kit but it was "POSITIVE 2 NEGATIVE" and after i figured out why the light wouldn't go on , i then unplugged and plugged correctly ''POSITIVE 2 POSITIVE" but now that side that I did wrong doesn't look as bright as the other side that was plugged correctly ... did i damage the bulb or ballast ??? or is it that i had the side that was done correctly running for longer ... thanks for posting this vid
SPCHILLIN718 1 month ago
@SPCHILLIN718 Hello, there is a chance you might have damaged the parts when you incorrectly installed them. Have you tried swapping the bulbs from one side to the other and seeing if there is any difference?
StealthAuto 1 month ago
@StealthAuto Thanks , I will try once the weather dries up
SPCHILLIN718 1 month ago
@StealthAuto I actually changed the color bulbs and after that was done, one side still seemed brighter ... at night I noticed one side was brighter on the ground ... I think my headlights (projectors) aren't positioned the same ! Sorry for responding so late , thanks again !
SPCHILLIN718 1 week ago
I have a 11 honda civic lx..i recently got a xentec kit and everything works fine and it looks great but i have a small flicker problem..any idea if i need to get just the anti flicker kit or something else?
willyyhoo 1 month ago
@willyyhoo what is the exact issue, can you explain in detail the issue you are having? depending on your issue the anti flicker capacitors can help you, we will just need to know a little bit more in order to be able to help.
StealthAuto 1 month ago
@StealthAuto It turns on and off fine the light stays on but it just flickers like the light looks like it's moving up and down.I tried taking the daytime light fuse out and that doesn't fix anything.
willyyhoo 1 month ago
@willyyhoo I would suggest you try the anti flicker capacitors, give them a shot and see what happens.
StealthAuto 1 month ago
@StealthAuto any idea which companys are good to use or a link? haha thank you btw it was bothering me for a while
willyyhoo 1 month ago
Do you need any relays with this kit?
Dchristian100 1 month ago
@Dchristian100 for most vehicles you will not need a relay, however there are some Dodges and other specific vehicles that might need a few additional pieces to help stop flickering.
StealthAuto 1 month ago
i have a question, i have a 08 camry
My left hid do not work properly. sometimes it turns on without trouble but sometimes my left HID doesn't turn on at all. it does not flicker when its on.
can you help? what is the problem? and what can i do to fix this problem.
taeho85 1 month ago
@taeho85 My guess would be that you have a defective ballast and it needs to be replaced. If only one side is having and issue and flickering then it is usually the components on that side and not the vehicle itself.
StealthAuto 1 month ago
@StealthAuto shoulda told him to swap bulbs simple troubleshooting
Clipzin33 1 month ago
Comment removed
taeho85 1 month ago
always turns off. If I turn all the lights off and then on again with the car still off, the same fog light remains off. I have to power the engine on to get them to function normally. I know with certainty both the ballast and the bulbs are fresh. My question is; Are cancellers the thing i need to ensure that all my HIDs turn on flawlessly?; with out ANY type of flickering or failure to turn on on demand?
TBN14TC 1 month ago
@TBN14TC The issue you are having will not be fixed by our anti flicker capacitors, I would suggest you go to a shop and have them check it out for you. This is not something we can diagnose over the internet. The vehicle needs to be checked and tested to see where the issue is coming from.
StealthAuto 1 month ago
This has been flagged as spam show
Hey man I have a 2003 Nissan Altima. I've been using HIDs for a little over a year now. This last August I bought some fog lights with HIDs. For the past several months I've noticed strange behavior with the fog light HIDs. For example when I remote start my car (all parking lights flash 1 & then twice when I unlock the car) one fog light blinks normally with out any problems while the other may flicker. All 4 HIDs usually work well when the car is on. However if the car is off one fog light
TBN14TC 1 month ago
Comment removed
TBN14TC 1 month ago
Hi do you have something for Volvo Xc90 2005?
lasthumain 2 months ago
@lasthumain Hey, For your Xc90 you will need a H11 bulb for the low beam, we carry that bulb and full kit. give us a call or go onto our site to check it out.
StealthAuto 2 months ago
Hi. I have a 2000 Honda Civic LX. I bought H4 6000K Xenon bulbs plug and play. Now I know one thing for sure that it has never came with any kind of kit, so is that ok? Or am I missing something with the bulbs? They are not working I have no idea why. Maybe you guys could help me with the wiring of them? Or I just have to buy the kit?
Thank you.
omaralbasri1 2 months ago
@omaralbasri1 did you just buy bulbs or a whole kit? Do the items that you have look like the ones we are showing in the video? If you bought a full kit and as long as you hook it up correctly they should work, you should not need any extra wiring kits or capacitors to make it work.
StealthAuto 2 months ago
Hello I have a 2005 Chrysler300 and I recently install a 55w hid kit and they are flickering hope you can help me what to do!! Thanks and god bless you!!
elmalcriado777 2 months ago
@elmalcriado777 Hello, we do not sell 55W kits because they usually cause issues, we only sell the 35w kits and unfortunately our anti-flicker capacitors only work on the 35w kits. I would suggest contacting the company you bought the kit from and asking them what they recommend.
StealthAuto 2 months ago
i have a full head light of a Silverado 2500HD, the car was totaled, i would like to make us of the headlight but i need to know what parts do i need to make it work, and do i need to connect it to a car battery? please help me bring the light back to life. btw it is not for car use, just a project i thought of making.
DoctorAbadi 2 months ago
@DoctorAbadi Hello, I am a bit confused with what you are asking, you will need to give the headlight power, and if its not going to be in the car you will have to find some external way to power it. If the headlight was still in the car you would just need to plug the stock headlight socket into the HID kit...
StealthAuto 2 months ago
@stealthauto . Thanks for the help. I was thinking about installing it on my 1973 AMC hornet. I have to mod the light sockets but should work. Thanks again
SuperHawaiian93 2 months ago
Is there any way how to install the xenon on a BMW e46?
Sam328i 2 months ago
@Sam328i yea people do it all the time, check out our site..
StealthAuto 2 months ago
Ok so I am new to this an I was wondering what the relay is for an if I need it or do I just hook up the ballast and bulb .
SuperHawaiian93 2 months ago
@SuperHawaiian93 It's a anti flicker capacitor, if your headlights start flickering or giving errors on your dash you can install these and they will get rid of those issues.
StealthAuto 2 months ago
Hi .. i wonna ask if any of those cables go to the batery or xenon dont have work with the batery? beacouse i have mercedes c from 1998 and the batery is in the back and will be hard to install....thanks
ivicazpopo 2 months ago
@ivicazpopo These kits do not need to be hooked up to the battery of the vehicle, they only need to be connected to the socket that was originally connected to your stock headlight bulb.
StealthAuto 2 months ago
I have a 2011 F150, will I need an error code canceler with my HID kit that has a relay?
ironass08 2 months ago
@ironass08 Hello, With the newer vehicles we always recommend purchasing the Anti-Flicker capacitors, and if you end up not needing them you can always return them for a full refund, we do not charge restocking fee's.
StealthAuto 2 months ago
2011 ford fusion, got a small flickering problem and occasional radio static, also I was driving and one side shut off and the other side worked perfectly, put both on after I got out of the store the opposite one that was working before shut off and the one that wasn't working before was working okay, shut both off again and both are on no problem, what could it be? Ballast or rainy weather, I'm not sure, thanks.
V8AmericanMuscle 2 months ago
@V8AmericanMuscle I would think its probably a ballast issue, typically if its a computer problem it will cut power to both lights and flicker them both at the same time. I would try swapping the ballast from one side to another, I know you said that both sides exhibited the same problem but just see if it helps.
StealthAuto 2 months ago
@V8AmericanMuscle My opinion would be that the ballast are most probably faulty. Also if you are seeing issues like this only on rainy days there is something wrong, your entire system should be waterproof and it should not allow water to get into the wiring harness.
StealthAuto 2 months ago
HELP HELP A.S.A.P. i plug in my hid kit on my 04 explorer and didn't turn on then took them back on to my 04 tahoe and they do work, what am i doing wrong? HELP PLEASE?? (monk3y_0809@live.com)
monk3y0809 3 months ago
@monk3y0809 did you make sure the polarity on the plugs is correct? Some cars have their pos and neg switched on the plug. You can try to flip the socket going from your vehicle to the ballast 180 degrees. Do not try this with anti flicker capacitors you will damage them.
StealthAuto 3 months ago
hey, help! so i installed HID kit on my honda civic 2012 lx model. the passenger HID light stays on but then turns off later. The driver one doesnt turn on all the time when i turn the headlights on. it does go on for like 1 second then turns off. if it does turn on itll flicker then turn off. HELP!
markieezsn145 3 months ago
@markieezsn145 do you have anti flicker capacitors installed? If its a flicker issue both lights should exhibit the same problem at the same frequency, if the lights come on and go off at different times you could have a bad pair of ballasts.
StealthAuto 3 months ago
do I need Error Code Canceller in my ford fusion 08? for the low lights.
patoa5 3 months ago
@patoa5 I am pretty sure you do for that model. If you buy it from us and don't need it, you can return it for a refund.
StealthAuto 3 months ago
@ FabianCharrua yes that is correct.
@ ironmaidx - Factory Xenon's are the same as HID's so if you already have xenon's then you already have the upgrade. If you wanted to upgrade your fog lights or high beams then yes you would do it this same way
StealthAuto 4 months ago
Hey i got a question for ya, i have an e46 bmw the light bulbs are xenon is it still as simple to run HIDs?
ironmaidx 5 months ago
@ ironmaidx - Factory Xenon's are the same as HID's so if you already have xenon's then you already have the upgrade. If you wanted to upgrade your fog lights or high beams then yes you would do it this same way
StealthAuto 3 months ago
Basically if your vehicle's harness fits directly onto the canceller then you would NOT used the extra harness and two wires that come out of the bulb correct?
FabianCharrua 5 months ago
Im having trouble with one of my bulbs flickering. 05 maxima with relay installed. Light still flickers
ant0280 5 months ago
@ant0280 some vehicles do not take well to HID kits and you will need a power harness, and possibly 50w resistors.
StealthAuto 4 months ago
MATE THAT WAS BANG ON
I NOW NO WHAT TO DO
THANKS :D
Akechiiii 5 months ago
I'm going to FAVORITE and LIKE this one.. Because your explanation was quick and easy to understand.. Great work.. Thanks a lot for this video!
xlos23x 6 months ago 7