@05clenharth My amanco oiler used to go within 1/2hr as it leaked and driped too much, stop the leak and turned the oil down to about 9 drips per a min, still too much but it took a good 3hrs before a top up.
@goldie103103 A friend of mine who is an ex lister engineer has a farbanks z type open crank and its perfect condition the engine is tight as a drum and he has the engine oiler set to 3 drips a minuite on the cylinder!
Just been offered 1 of these (well APR 2.5HP) for £800. Nearly the same, little bit smaller than this BPR.
goldie103103 1 month ago
Some oil in the oiler would help a lot. Oil is cheaper than metal.
justsmoky 1 year ago
@justsmoky There is oil in it, there was about half an inch at the bottom, look closeley and you will see.
mileybob 1 year ago
@mileybob people think that these things get through an oiler of oil in10 mins!
05clenharth 11 months ago
@05clenharth My amanco oiler used to go within 1/2hr as it leaked and driped too much, stop the leak and turned the oil down to about 9 drips per a min, still too much but it took a good 3hrs before a top up.
goldie103103 1 week ago
@goldie103103 A friend of mine who is an ex lister engineer has a farbanks z type open crank and its perfect condition the engine is tight as a drum and he has the engine oiler set to 3 drips a minuite on the cylinder!
05clenharth 1 week ago
@05clenharth 6 dpm I should have set the amanco to.
goldie103103 1 week ago
Would I be right in thinking its around 4hp?
goldie103103 2 years ago
Wonderful engine!
5* from Germany.
Bidone
Bidone1967 2 years ago
Now thats a Ruston!!
goldie103103 2 years ago 2