Edgecam Software

Waveform machining from Edgecam at SECO - Material : Steel 709M40T HB 248/302, 12mm diameter chip splitter, Speed : 7959 RPM, Feed : 6750 mm/min, Cycle time : 2.75 minutes, Depth 20mm, Stepover 20%

Multi part setup production machining on a Cincinnati Milacron horizontal milling machine

Edgecam 3 + 2 and simultaneous 5 axis machining on a DMU650 milling machine

Edgecam fully supports the Mazak Integrex i & j series. This video demonstrates the various machining operations including 45 degree turning , Milling and part transfer.

Edgecam mill/turn including full support for 45degree turning and grooving, milling and part transfer

Edgecam 5 axis wheel machining from solid. Also support of C-Axis turning on a Matec 30-HV

Edgecam 3+2 milling on a DMU 50 Evo

How to machine an impeller using Advanced 5-axis from Edgecam

Waveform roughing is a high speed machining strategy that maintains a constant tool cutting load by ensuring the tool engagement into the material is consistent. The tool path moves in a smooth path to avoid sharp changes ...

Cutting Trials at Sandvik

In this video you can see Edgecam using Waveform roughing to fly through the roughing cycle. A job machined in the traditional fashion would take 2hrs 40mins - with Edgecam - it takes just 5 mins!

A new short video showing Edgecam Waveform steering the tool through P20 almost as quickly as cutting air. Shorter, intelligent roughing will ensure your machine and tool are working hard for your business.

A new short video showing Edgecam Waveform in action on the Mazak Integrex i200