Benfoxmra95

In this video I'll show you the proper way to measure valve guide clearance on a set of Ducati 916 cylinder heads that I've installed bronze valve ...

Race start

Q session

A tip on how to quickly check if your valves are sealing if you don't own the proper tools to check seat concentricity.

Do not lap valves it puts a uneven surface on the 45.

This brand new valve was lapped and the lapping process cups the 45 surface of the valve

How to remove dowel bushings from Ducati cylinders or cylinder heads without destroying the bushing or head.

The most ridiculous thing I've ever seen in bike racing occurs to Maxime Berger's Ducati, thankfully at the slowest corner on the track. Apparently...

Kelly moss pit practice at Sebring mar 2

Dyno tuning, on a superflow Dyno. Pulley upgrade

Dyno tuning, on a superflow Dyno. Pulley upgrade

Dyno tuning, on a superflow Dyno. Pulley upgrade

Dyno tuning, on a superflow Dyno. Pulley upgrade

Dyno tuning, on a superflow Dyno. Pulley upgrade

In this video I will show you how to repair stripped nutserts in a 1098/848/999/1198 airbox

www.foxperformanceengines.com

(719)-570-9595

Installing beryllium exhaust valve seats in a Honda 250 head for a Moriwaki 250 that ruined the stock steel seats from roadrace useage.

3rd video of series of exhaust seat repair on a Ducati 1098r cylinder head.

www.foxperformanceengines.com

(719)570-9595

In the 2nd video of 3 I am making custom sized exhaust seats for a 1098r head that had damage to it from being run excessively lean.

Please look f...

In the 1st video of 3 parts I am removing damaged exhaust seats from a 2008 1098r that was run extremely lean, to the point where it was melting th...

Installing stock Ducati steel valve guides in 2v heads.

In this video is shown a repair using the stock guides. I prefer to use aftermarket bronz...

Ben Fox

www.foxperformanceengines.com

Today I got to turn laps on Larry pegrams AMA superbike. This is his actual superbike that he races in AMA superbike. This bike won at Road Ameri...

Today I got to turn laps on Larry pegrams AMA superbike. This is his actual superbike that he races in AMA superbike. This bike won at Road Ameri...

Joe Kopp riding a Ducati ds1000 powered dirt tracker at a private Colorado dirt track.

You will see larry Pegram racing this bike at the Springfie...

Part 3 of 3

Please watch parts 1 and 2

www.foxperformanxeengines.com

(719)570-9595

Part 2 of 3

www.foxperformanceengines.com

(719)570-9595

In this video part 1 of 3

I show you how I recondition Ducati pankl con rods back within the factory spec.

Please watch video 2 and 3 of this ser...

Cutting the final seat angles on the intake seats of a Ducati 996 using bronze seats and oversized stainless valves.

www.foxperformanceengines.com

Cutting the final seats for the exhaust on a Ducati 996 cylinder head

www.foxperformanceengines.com

Boring 996 head for bronze intake seats

www.foxperformanceengines.com

Setting up a cutter to bore the seat pockets for bronze intake and beryllium exhaust seat for a Ducati 996 cylinder head

www.foxperformanceengines...

In this video I'm boring a set of 996 heads for beryllium exhaust seats

www.foxperformanceengines.com

This seat was cut at a machine shop with poor equipment or no ability to measure their work.

www.foxperformanceengines.com

This seat is being cut on a Rottler machine that will hold a concentricity of .0003"

A properly cut seat on the right equipment will prevent leak...

This seat was cut on my Rottler seat and guide machine.

In previous videos I showed you what a well ground valve looks like.

Now we will show wha...

This is the valve that was shown being ground in my Sunnen vr6500 valve grinder. You can see in this video after grinding the runout in the freshl...

This valve was originally ground by a machine shop with a very inaccurate grinder. You can here the runout in the valve as it starts to contact th...

Triple clamp boring to fit Ohlins Superbike Forks

www.foxperformanceengines.com