1111jessyjames

http://www.spygeeks.net/How...

How to set ...

My machine cutting out a part for my nephews skylanders bed.

A simple 3-D pine wood part for a cover plate on a ceiling fan. It needed to fit in with the pine paneling, and large outdoor scene mural that was ...

Here is a first carving on my new machine. Plywood is fuzzy and text isn't a normal one that people are familiar with but it did just fine.

What's...

Cast Cnc pinon slipping out of Rack.

The movement of the CncRouterParts rack and pinon. When jogging to the right in the positive direction and than jogging in the negative direction t...

In this video, I show a real world example of how I am applying the AVR microcontroller to control a vacuum pump using the vacuum pressure in a tan...

Here is a little video of me cutting out a Harley-Davidson logo customized for a friend. Sorry for the lack of video editing..

The machine is wo...

This is a 3 part video series on the total design process for a vacuum mount assembly for the greenBull CNC Machine. The process includes brainsto...

Breaking in the Y-Axis on the Cast Cnc System and my own base table design. Table is 6' x 12'

This ismy new cnc table that I am working on. Its my own design as far as the base goes and will re-use the existing gantry from my old Joes 4x4 H...

Slow motion test of the Canon 5D mark iii. 1200fps

24-70mm F2.8L

Shutter: 1/1000 @ 3.5f

ISO: 3200

Video mode: 720p 60fps (low compression)

Adobe...

What does it take to start a design museum? This week we'll be talking to two accomplished industrial designers who made that happen. Sam Aquillano...

Dragon Cutout of 1/4" mdf. Total cutting time was 6 minutes.

This was a CNC Carving for a nephew of a close friend. 3D Artwork comes from the VectorArt3D Wildlife Series.

Big Bite IPA by Spanish Peaks Brewing Co. Mixcat Beer Review

I hope you enjoy this beer review.. This IPA was an amazing beer, and honestly just ...

Nothing better to do so thought I would try and make a new piece of CNC Music.

Here is another dragon cut out. Worked out great !!

Engraving Mirror with "My Best Friend Ever".

A quick start guide to using the Break-In Wizard.

First break-in of the Y-axis with the Rack & Pinon mod.

First break-in of the x-axis with the Rack & Pinon mod. Also the 8-Bearing mod with the dual flange bearings on z-axis.

New Project

Machining Hold Down Clamps

Us hiking castle peak at Boreal.

Al's CNC Miniature Doll House

Joe's CNC Hybrid Builder